参数资料
型号: MTA81010-LPI/P
元件分类: 微控制器/微处理器
英文描述: 8-BIT, OTPROM, 4 MHz, RISC MICROCONTROLLER, PDIP28
封装: PLASTIC, DIP-28
文件页数: 67/76页
文件大小: 745K
代理商: MTA81010-LPI/P
1995 Microchip Technology Inc.
DS39005D-page 7
MTA81010
3.0
OPERATIONAL REGISTER
FILES
3.1
Timer0 (TMR0) Module
The TMR0 module timer/counter has the following
features:
8-bit timer/counter
Readable and writable
8-bit software programmable prescaler
Internal or external clock select
Edge select for external clock
Figure 3-1 is a simplified block diagram of the TMR0
module, while Figure 3-2 shows the electrical structure
of the TMR0 input.
Timer mode is selected by clearing the T0CS bit
(OPTION<5>). In timer mode, the TMR0 module will
increment every instruction cycle (without prescaler). If
TMR0 is written, increment is inhibited for the following
two cycles (Figure 3-3 and Figure 3-4). The user can
work around this by writing an adjusted value to the
TMR0 module.
Counter mode is selected by setting the T0CS bit
(OPTION<5>).
In this mode TMR0 will increment
either on every rising or falling edge of pin T0CKI. The
incrementing edge is determined by the T0 source
edge (T0SE) select bit (OPTION<4>).
Clearing the
T0SE bit selects the rising edge. Restrictions on the
external
clock input are discussed in detail in
Section 3.1.1.
The prescaler is shared between the TMR0 module
and the watchdog timer. The prescaler assignment is
controlled
in
software
by
the
control
bit
PSA
(OPTION<3>).
Setting the PSA bit will assign the
prescaler to the WDT and cause the prescale for TMR0
to be 1:1. Clearing the PSA bit will assign the prescaler
to TMR0.
The prescaler is neither readable nor
writable. When the prescaler is assigned to the TMR0
module, prescale value of 1:2, 1:4, ..., 1:256 are
selectable.
Section 6.2 details the operation of the
prescaler.
FIGURE 3-1:
TMR0 BLOCK DIAGRAM
FIGURE 3-2:
ELECTRICAL STRUCTURE OF T0CKI PIN
Note 1:
Bits, T0CS, T0SE, PSA, PS2, PS1 and PS0 are located in the OPTION register.
2: The prescaler is shared with Watchdog Timer (Figure 6-6).
T0CKI
T0SE
0
1
0
pin
T0CS
FOSC/4
Programmable
Prescaler
Sync with
Internal
clocks
TMR0
PSout
(2 cycle delay)
PSout
Data bus
8
PSA
PS2, PS1, PS0
3
VSS
RIN
Schmitt Trigger
N
T0CKI
Input Buffer
相关PDF资料
PDF描述
MTA81010S-RCI/SO 8-BIT, OTPROM, 4 MHz, RISC MICROCONTROLLER, PDSO28
MTA81010-XTI/P 8-BIT, OTPROM, 4 MHz, RISC MICROCONTROLLER, PDIP28
MTA81010T-XT/SO 8-BIT, OTPROM, 4 MHz, RISC MICROCONTROLLER, PDSO28
MTA81010S-XTI/SO 8-BIT, OTPROM, 4 MHz, RISC MICROCONTROLLER, PDSO28
MTA81010-LPI/SO 8-BIT, OTPROM, 4 MHz, RISC MICROCONTROLLER, PDSO28
相关代理商/技术参数
参数描述
MTA8106DGVRA 功能描述:SW TOGGLE SPDT VERT RT ANG PC 6A RoHS:否 类别:开关 >> 拨动开关 系列:MTA 绿 标准包装:1 系列:A 电路:双刀双掷 开关功能:开-开-开 触点额定电压:6A @ 125VAC 触动器类型:扁平型 触动器长度:11.38mm 发光:不发光 安装类型:面板安装 端接类型:焊片 轴衬螺纹:1/4-40 包装:散装
MTA8106DVRA 功能描述:SWITCH TOGGLE SPDT VRA PC 6A RoHS:否 类别:开关 >> 拨动开关 系列:MTA 绿 标准包装:1 系列:A 电路:双刀双掷 开关功能:开-开-开 触点额定电压:6A @ 125VAC 触动器类型:扁平型 触动器长度:11.38mm 发光:不发光 安装类型:面板安装 端接类型:焊片 轴衬螺纹:1/4-40 包装:散装
MTA8106DVRA04 功能描述:SWITCH TOGGLE SPDT VRA PC 6A RoHS:是 类别:开关 >> 拨动开关 系列:MTA 绿 标准包装:1 系列:A 电路:双刀双掷 开关功能:开-开-开 触点额定电压:6A @ 125VAC 触动器类型:扁平型 触动器长度:11.38mm 发光:不发光 安装类型:面板安装 端接类型:焊片 轴衬螺纹:1/4-40 包装:散装
MTA8106EGRA 功能描述:SW TOGGLE SPDT RT ANG PC 6A RoHS:否 类别:开关 >> 拨动开关 系列:MTA 绿 标准包装:1 系列:A 电路:双刀双掷 开关功能:开-开-开 触点额定电压:6A @ 125VAC 触动器类型:扁平型 触动器长度:11.38mm 发光:不发光 安装类型:面板安装 端接类型:焊片 轴衬螺纹:1/4-40 包装:散装
MTA8106EGRA04 功能描述:SWITCH TOGGLE SPDT RT ANG PC 6A RoHS:是 类别:开关 >> 拨动开关 系列:MTA 绿 标准包装:1 系列:A 电路:双刀双掷 开关功能:开-开-开 触点额定电压:6A @ 125VAC 触动器类型:扁平型 触动器长度:11.38mm 发光:不发光 安装类型:面板安装 端接类型:焊片 轴衬螺纹:1/4-40 包装:散装