- 您现在的位置：买卖IC网 > PDF目录45594 > MUAC4K64-50TDC SPECIALTY MICROPROCESSOR CIRCUIT, PQFP100 PDF资料下载
参数资料
| 型号： | MUAC4K64-50TDC |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | SPECIALTY MICROPROCESSOR CIRCUIT, PQFP100 |
| 封装： | TQFP-100 |
| 文件页数： | 6/32页 |
| 文件大小： | 504K |
| 代理商： | MUAC4K64-50TDC |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
MUAC Routing CoProcessor (RCP) Family
Register Descriptions
14
Rev. 4
Full Cascading
The Full flag is set LOW in a particular MUAC RCP if the
/FI line is LOW, and that device is full. During a Write
cycle, the Full flag will not change until /E goes HIGH
during that cycle. When the /FI line is HIGH, one or more
locations are free in the higher-priority devices; therefore,
when the /FI line is HIGH, whether or not that particular
device is full, its /FF output will remain HIGH. This
method allows the Full Flag daisy chain to recognize
non-contiguous empty locations throughout the entire
MUAC RCP system.
The daisy chain gives System Full indication. When the
device at the end of the chain has its /FF output LOW, the
entire CAM system is full. The first device in the daisy
chain has its /FI line tied LOW to ensure data can be
written into the system.
The daisy chain also controls Write at Next Free Address
cycles as well as Read Next Free Address cycles so that
they work globally across the system, and not just locally
in a specific device. Only the device in which the /FI line
is LOW, and which is not full, will respond to the Write
cycle. Therefore, deletions and insertions can be made in
the memory, without the need to keep track of empty
locations.
Match Cascading
The Match flag /MF will be LOW in a particular device
within a vertically cascaded system when its /MI input is
LOW, or when there is a match in that device. During a
Comparison cycle, the Match flag will not change until /E
goes HIGH during that cycle. When the /MI line is LOW,
one or more locations in higher-priority devices have a
match; when the /MI line is LOW, the /MF output will be
forced LOW. This method allows the Match Flag daisy
chain to respond to and prioritize matches throughout the
entire MUAC RCP system.
The daisy chaining gives a System Match indication.
When the device at the end of the daisy chain has its /MF
output LOW, there is a match within the MUAC system.
The first device in the daisy chain has its /MI input tied
HIGH.
The daisy chain also controls access to the device by
controlling the outputs during a Read Highest-Priority
Match data, or Read Status register, onto the DQ31–0
lines. The device must be selected with either /CS1, or
/CS2, or the Data Select register. After a Comparison or
Read/Write at Highest-Priority Match Address cycle, only
the device whose /MI line is HIGH, and which has a valid
match, will drive data onto DQ31–0 or onto PA:AA bus;
any device that has its /MI line set LOW will have its
outputs in their high-impedance state, even if it has a valid
match. Therefore, Reads from and Writes to the
Highest-Priority Matching address operate over the entire
system; only the device in which the /MI line is HIGH and
that has a match will respond to the cycle. This scheme
automatically prioritizes a system of vertically cascaded
devices,
the
highest
up
in
the
chain
has
the
highest-priority. Note however, that cycles that do not
access highest-priority match data or the Status register
will operate without regard to the state of the Match daisy
chain.
Multiple Match Flag Daisy Chain
The Multiple Match flag, /MM, is an open-drain output,
and will be pulled LOW by a particular device when its
/MI input is HIGH and there is more than one match
within the device, or when the /MI input is LOW and there
is one match within the device. During a Comparison
cycle, the Multiple Match flag will not change until /E
goes HIGH during that cycle. This wired-OR output
provides system level indication of the multiple match
condition within a vertically cascaded system of MUAC
RCPs.
Match Flag Timing Overhead
There is a propagation delay for the match results to ripple
down through the daisy chain. All the MUAC RCPs
within the system execute a Comparison cycle in parallel,
so the local results are available at the end of a
Comparison cycle. The local Match flags do not change
during a Comparison cycle until /E goes HIGH. The
logical combination of the results then propagates down
the daisy chain with a delay through each stage. The
compare time in each device operating in parallel is added
to the ripple delay through the daisy chain. Before reading
the results of a comparison from the System Match flag,
the daisy chain must be given time to settle to a valid state.
If there are N devices vertically cascaded in a system, and
the time to get a valid output on /MF for one device is
t(MF), and the propagation delay for the flag to ripple
through one device from /MI valid to /MF valid is t(PD),
then the time t(DC) for the daisy chain to develop a valid
output condition is:
This period of time must elapse before the flagged results
of the comparison are available, and before /OE is driven
LOW or a Status Register Read cycle is performed.
There is a similar but shorter delay for the Full Flag daisy
chain, but this only limits the rate at which back-to-back
Write at Next Free Address cycles can be performed.
t(DC) = t(MF)+(N-1)*t(PD)
相关PDF资料 |
PDF描述 |
|---|---|
| MUAC8K64-70TDC | SPECIALTY MICROPROCESSOR CIRCUIT, PQFP100 |
| MUAC4K64-90TDC | SPECIALTY MICROPROCESSOR CIRCUIT, PQFP100 |
| MUAC8K64-70TDI | SPECIALTY MICROPROCESSOR CIRCUIT, PQFP100 |
| MUNICH128X | 4 CHANNEL(S), 8.192M bps, LOCAL AREA NETWORK CONTROLLER, PQFP160 |
| MUPA64K16-15TJI | SPECIALTY MICROPROCESSOR CIRCUIT, PQFP128 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MUB08A | 制造商:NSC 制造商全称:National Semiconductor 功能描述:1W, Bypass-Capacitor-less Audio Amplifier with Internal Selectable Gain |
| MUB25-10DZ | 制造商:SMC Corporation of America 功能描述:Cylinder, compact, plate, dbl act, 25mm |
| MUB31DH | 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:LOW CURRENT HIGH EFFICIENCY LED |
| MUB32DH | 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:ULTRA HIGH BRIGHTNESS RED LED LAMP |
| MUB32DH-5 | 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:LOW CURRENT HIGH EFFICIENCY RED LED LAMP |
发布紧急采购，3分钟左右您将得到回复。