- 您现在的位置：买卖IC网 > PDF目录241084 > MVUPT48R (MICROSEMI CORP-SCOTTSDALE) 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-216AA PDF资料下载
参数资料
| 型号： | MVUPT48R |
| 厂商： | MICROSEMI CORP-SCOTTSDALE |
| 元件分类： | 参考电压二极管 |
| 英文描述： | 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-216AA |
| 封装： | PLASTIC, POWERMITE-2 |
| 文件页数： | 1/3页 |
| 文件大小： | 165K |
| 代理商： | MVUPT48R |
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSORS
Microsemi
Scottsdale Division
Page 1
Copyright
2007
6-26-2007 REV G
WWW
.Microse
m
i
.CO
M
S C O T TS DALE DIVISION
UPT5e3 – UPT48e3
UPT5Re3 – UPT48Re3
UPTB8e3 – UPTB48e3
DESCRIPTION
APPEARANCE
Microsemi’s new Powermite UPT series transient voltage suppressors
feature oxide-passivated chips, with high-temperature solder bonds for high
surge capability, and negligible electrical degradation under repeated surge
conditions. Both unidirectional and bidirectional configurations are available.
In addition to its size advantages, Powermite package includes a full
metallic bottom (cathode) that eliminates possibility of solder flux entrapment
at assembly and a unique locking tab serving as an integral heat sink.
Innovative design makes this device fully compatible for use with automatic
insertion equipment.
DO-216AA
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
UPT5-48e
3
UPT5
R-4
8R
e3
UPTB8
-48
e3
FEATURES
APPLICATIONS / BENEFITS
Powermite Package with standoff voltages 5 to 48 V
Both Unidirectional polarities and Bidirectional:
Anode to case bottom (UPT5e3 thru UPT48e3)
Cathode to case bottom (UPT5Re3 thru UPT48Re3)
Bidirectional (UPTB8e3 thru UPTB48e3)
Clamping time less than 100 pico-seconds for
unidirectional
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, or JANTXV are available by
adding MQ, MX, or MV, prefixes respectively to part
numbers, e.g. MXUPT15e3, MVUPTB28e3,
MSPUPU10e3, etc.
RoHS Compliant with e3 suffix part number
Protects sensitive components such as IC’s,
CMOS, Bipolar, BiCMOS, ECL, DTL, T
2L, etc.
Protection from switching transients & induced RF
New improved lower leakage current for the
UPT5Re3
Integral heat sink / locking tabs
Full metallic bottom eliminates flux entrapment
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: UPT5//UPT5R/UPTB8 to17
Class 2: UPT5//UPT5R/UPTB8 to12
(also add e3 suffix to each part number)
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Operating and Storage Temperature: –65C to
+150C
Peak Pulse Power at 8/20 s (See Figure 1 and 2)
UPT5Re3: 600 Watts
UPT5e3 thru UPT48e3: 1000 Watts
UPT8Re3 thru UPT48Re3: 1000 Watts
UPTB8e3 thru UPTB48e3: 1000 Watts
Peak Pulse Power at 10/1000 s (See Figure 2).
UPT5Re3: 100 Watts
UPT5e3 thru UPT48e3: 150 Watts
UPT8Re3 thru UPT48Re3: 150 Watts
UPTB8e3 thru UPTB48e3: 150 Watts
Impulse Repetition Rate (duty factor): 0.01%
Thermal resistance: 15C/W junction to base tab or
240C/W junction to ambient when mounted on FR4
PC board with 1 oz copper
Steady-State Power: 2.5 Watts (base tab ≤112C)
Solder Temperatures: 260C for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy compound meeting UL94V-0
FINISH: Annealed matte-Tin plating over copper
and readily solderable per MIL-STD-750, method
2026
POLARITY: Cathode or anode to TAB 1 (bottom)
as described in Marking below and Figure 5
MARKING:
Anode to TAB 1: T plus the last two digits of part
number, e.g. UPT5e3 is T05, UPT12e3 is T12
Cathode to TAB1: U plus last two digits of part
number, e.g. UPT5Re3 is U05, UPT12Re3 is U12
Bipolar: B plus the last two digits of part number,
e.g. UPTB8e3 is B08, UPTB12e3 is B12, etc.
Please note dot suffix (for e3 suffix)
WEIGHT: 0.016 gram (approximate)
See package dimension on last page
Tape & Reel option: Standard per EIA-481-B using
12 mm tape with 3,000 per 7 inch reel or 12,000
per 13 inch reel (add TR7 or TR13 suffix to part
number)
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关PDF资料 |
PDF描述 |
|---|---|
| MLL4682-1 | 2.7 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-213AA |
| MLL4689C-1TR | 5.1 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-213AA |
| MLL4690D-1 | 5.6 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-213AA |
| MLL4699C-1 | 12 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-213AA |
| MLL4703D-1TR | 16 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-213AA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MVV351B | 制造商:MEDIA VISION 功能描述: |
| MVVT1783 | 制造商:MICROWAVE 功能描述: |
| MVW | 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Metal Alloy Resistors, Special Purpose, High Voltage |
| MVW1/240K00KRC | 功能描述:金属膜电阻器 - 透孔 40Kohms 10% RoHS:否 制造商:IRC 电阻:63.4 kOhms 容差:1 % 功率额定值:100 mW 电压额定值:200 V 温度系数:100 PPM / C 端接类型:Axial 工作温度范围: 尺寸:2.3 mm Dia. x 6.4 mm L 封装:Bulk |
| MVW3/440K00KRC | 功能描述:金属膜电阻器 - 透孔 40Kohms 10% RoHS:否 制造商:IRC 电阻:63.4 kOhms 容差:1 % 功率额定值:100 mW 电压额定值:200 V 温度系数:100 PPM / C 端接类型:Axial 工作温度范围: 尺寸:2.3 mm Dia. x 6.4 mm L 封装:Bulk |
发布紧急采购，3分钟左右您将得到回复。