参数资料
型号: MX10C80500PC
厂商: MACRONIX INTERNATIONAL CO LTD
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 40 MHz, MICROCONTROLLER, PDIP40
封装: PLASTIC, DIP-40
文件页数: 10/15页
文件大小: 109K
代理商: MX10C80500PC
4
P/N:PM0804
REV. 1.0, JUL. 01, 2004
Specifications subject to change without notice, contact your sales representatives for the most update information.
MX10C8050
PIN DESCRIPTIONS
VCC : Supply voltage.
VSS : Circuit ground.
Port 0 : Port 0 is an 8-bit, open drain, bidirectional I/O
port. As an output port each pin can sink several LS
TTL inputs. Port 0 pins that have 1's written to them
float, and in that state can be used as high-impedance
inputs.
Port 0 is also the multiplexed low-order address and data
bus during accesses to external Program and Data
Memory. In this application it uses strong internal pullups
when emitting 1's, and can source and sink serveral LS
TTL inputs.
Port 1 : Port 1 is an 8-bit bidirectional I/O port with inter-
nal pullups. The port 1 output buffers can drive LS TTL
inputs. Port 1 pins that have 1's written to them are
pulled high by the internal pullups, and in that state can
be used as inputs. As inputs, Port 1 pins that are exter-
nally pulled low will source current (IIL, on the data sheet)
because of the internal pullups.
In additional, Port 1 serves the functions of the following
special features of the MX10C8050:
Port Pin
Alternate Function
P1.0
T2 (External Count Input to Timer/
Counter 2), Clock-Out
P1.1
T2EX (Timer/Counter 2 Capture/Reload
Trigger and Direction Control)
Port 2 : Port 2 is an 8-bit bidirectional I/O port with inter-
nal pullups. The port 2 output buffers can drive LS TTL
inputs. Port 2 pins that have 1's written to them are
pulled high by the internal pullups, and in that state can
be used as inputs. As inputs, Port 2 pins that are exter-
nally pulled low will source current (IIL, on the data sheet)
because of the internal pullups.
Port 2 emits the high-order address byte during fetches
from external Program Memory and during accesses to
external Data Memory that use 16-bit addresses (MOVX
@DPTR). In this application it uses strong internal
pullups when emitting 1's. During accesses to external
Data Memory that use 8-bit addresses (MOVX @Ri),
Port 2 emits the contents of the P2 Special Function
Register.
Port 3 : Port 3 is an 8-bit bidirectional I/O port with inter-
nal pullups. The port 3 output buffers can drive LS TTL
inputs. Port 3 pins that have 1's written to them are
pulled high by the internal pullups, and in that state can
be used as inputs. As inputs, Port 3 pins that are exter-
nally pulled low will source current (IIL, on the data sheet)
because of the internal pullups.
Port 3 also serves the function of various special fea-
tures of the 8051 Family, as listed below :
Port Pin
Alternate Function
P3.0
RXD (serial input port)
P3.1
TXD (serial output port)
P3.2
INT0 (external interrupt 0)
P3.3
INT1 (external interrupt 1)
P3.4
T0 (Timer 0 external input)
P3.5
T1 (Timer 1 external input)
P3.6
WR (external data memory write sttobe)
P3.7
RD (external data memory read strobe)
PROCESS INFORMATION
This device is manufactured on a MXIC CMOS process.
PACKAGES
MX10C8050
0
P
C
Temperature
C=0
°C to 70°C
I=-40
°C to 85°C
Package
P=PDIP
Q=PLCC
F=PQFP
ROM Size
0=64K Bytes
相关PDF资料
PDF描述
MX10C80500QC 8-BIT, MROM, 40 MHz, MICROCONTROLLER, PQCC44
MX10C80500PI 8-BIT, MROM, 40 MHz, MICROCONTROLLER, PDIP40
MX10FMAXDQC 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQCC44
MX98216EC 16 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP208
MX98902AQC 2 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQCC84
相关代理商/技术参数
参数描述
MX10C8050FC 制造商:未知厂家 制造商全称:未知厂家 功能描述:SINGLE-CHIP 8-BIT MICROCONTROLLER
MX10C8050FI 制造商:未知厂家 制造商全称:未知厂家 功能描述:SINGLE-CHIP 8-BIT MICROCONTROLLER
MX10C8050PC 制造商:未知厂家 制造商全称:未知厂家 功能描述:SINGLE-CHIP 8-BIT MICROCONTROLLER
MX10C8050PI 制造商:未知厂家 制造商全称:未知厂家 功能描述:SINGLE-CHIP 8-BIT MICROCONTROLLER
MX10C8050QC 制造商:未知厂家 制造商全称:未知厂家 功能描述:SINGLE-CHIP 8-BIT MICROCONTROLLER