- 您现在的位置：买卖IC网 > PDF目录21600 > MY4Z-D DC24 (Omron Electronics Inc-IA Div)RELAY GEN PURPOSE 4PDT 3A 24V PDF资料下载
参数资料
| 型号： | MY4Z-D DC24 |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 18/20页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE 4PDT 3A 24V |
| 标准包装： | 1 |
| 系列： | MY |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 36.9mA |
| 线圈电压： | 24VDC |
| 触点形式： | 4PDT（4 C 型） |
| 触点额定值（电流）： | 3A |
| 切换电压： | 250VAC，125VDC - 最小值 |
| 关闭电压（最大）： | 19.2 VDC |
| 关闭电压（最小）： | 2.4 VDC |
| 特点： | 二极管 |
| 安装类型： | 可插 |
| 端接类型： | 插入式 |
| 包装： | 散装 |
| 触点材料： | 银（Ag） |
| 操作时间： | 20ms |
| 释放时间： | 20ms |
| 线圈功率： | 900 mW |
| 线圈电阻： | 650 欧姆 |
| 工作温度： | -55°C ~ 70°C |
| 其它名称： | MY4Z-DDC24 MY4ZDDC24 |
■ Precautions
Precautions for Connection
? Do not move the screwdriver up, down, or from side to side while it
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the coil spring or cracks in the
housing) or cause deterioration of insulation.
? Do not insert the screwdriver at an angle. Doing so may break the
side of socket and result in a short-circuit.
? Do not insert two or more wires in the hole. Wires may come in con-
tact with the spring causing a temperature rise or be subject to
General Precautions
? Use the clip to prevent relays floating or falling out of the socket.
? Do not use the product if it has been dropped on the ground. Drop-
ping the product may adversely affect performance.
? Confirm that the socket is securely attached to the mounting track
before wiring. If the socket is mounted insecurely it may fall and
injure the operator.
? Ensure that the socket is not charged during wiring and mainte-
nance. Not doing so may result in electric shock.
? Do not pour water or cleansing agents on the product. Doing so
may result in electric shock.
? Do not use the socket in locations subject to solvents or alkaline
chemicals.
? Do not use the socket in locations subject to ultraviolet light (e.g.,
direct sunlight). Doing so may result in markings fading, rust, corro-
sion, or resin deterioration.
? Do not dispose of the product in fire.
sparks. (There are two wiring holes for each terminal.)
Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of screw-
driver in the fixture rail, and move it in the direction shown below.
Screwdriver
? Insert the screwdriver along the hole wall as shown below.
Fixture rail
Screwdriver
? If lubricating liquid, such as oil, is present on the tip of screwdriver,
the screwdriver may fall out resulting in injury to the operator.
? Insert the screwdriver into the bottom of the hole. It may not be pos-
sible to connect cables properly if the screwdriver is inserted incor-
rectly.
298
General-purpose Relay
MY
相关PDF资料 |
PDF描述 |
|---|---|
| SMBJ130A | DIODE TVS 130V 600W UNI 5% SMD |
| LY4N-AC24 | RELAY GEN PURPOSE 4PDT 10A 24V |
| LPS0600H4700JB | RESISTOR HEAT SINK 470 OHM 600W |
| SMBJ48A | DIODE TVS 48V 600W UNI 5% SMD |
| LPS0600H47R0JB | RESISTOR HEAT SINK 47 OHM 600W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MY4ZF-DC24 | 制造商:Omron Electronic Components LLC 功能描述:Electromechanical Relay 4PDT 3A 24VDC 650Ohm Bracket Mount |
| MY4ZH-AC110/120 | 功能描述:通用继电器 RELAY RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| MY4ZHAC110120NC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:RELAY GEN PURPOSE 4PDT 3A 120V |
| MY4ZHAC24 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:RELAY GEN PURPOSE 4PDT 3A 24V |
| MY4ZH-AC24 | 功能描述:通用继电器 RELAY RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
发布紧急采购，3分钟左右您将得到回复。