- 您现在的位置：买卖IC网 > PDF目录20671 > NCP5608MTR2G (ON Semiconductor)IC LED DRVR WHITE BCKLGT 24-TQFN PDF资料下载
参数资料
| 型号： | NCP5608MTR2G |
| 厂商： | ON Semiconductor |
| 文件页数： | 4/16页 |
| 文件大小： | 0K |
| 描述： | IC LED DRVR WHITE BCKLGT 24-TQFN |
| 产品变化通告： | Product Obsolescence 19/Dec/2008 |
| 标准包装： | 4,000 |
| 拓扑： | 切换式电容器（充电泵） |
| 输出数： | 8 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光，闪灯/白光 |
| 类型 - 次要： | 白色 LED |
| 频率： | 1.3MHz |
| 电源电压： | 2.7 V ~ 5.5 V |
| 输出电压： | 4.8 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TFQFN 裸露焊盘 |
| 供应商设备封装： | 24-TQFN |
| 包装： | 带卷 (TR) |
| 工作温度： | -40°C ~ 85°C |
NCP5608
PIN FUNCTION DESCRIPTION
Pin
1
Symbol
AGND
Type
GROUND
Description
This pin is the NCP5608 analog ground and shall be connected to the system ground. Care
must be observed to minimize the total parasitic inductance between the pin and the ground
plane.
2
IREFFL
OUTPUT, ANALOG
This pin is used to set up the current reference for the FLASH output currents (LED5 to
LED8). The reference current is derived from the internal bandgap voltage to ground by
means of an external resistor. (Note 1)
3
IREFBK
OUTPUT, ANALOG
This pin is used to set up the current reference for the BACK LIGHT output currents (LED1
to LED4). The reference current is derived from the internal bandgap voltage to ground by
means of an external resistor. (Note 1)
4
SDA
INPUT, DIGITAL
This pin, associated with the SCL signal, carries the DATA signal to set up the selected
output LED current.
The DATA signal is built with a single SDA line to support the I2C protocol.
5
SCL
INPUT, DIGITAL
This is the clock signal associated with the SDA pins. The pin carries the standard CLOCK
signal to operate the I2C protocol.
6
CCMP
ANALOG, INPUT
This pin is connected to the internal I2C bias network and must be either left open, or
bypassed to ground by a 10 nF ceramic capacitor when the I2C voltage drops below 1.8 V.
Such a capacitor compensate the voltage drop during normal operation, keeping in mind it is
not mandatory when the I2C voltage is 1.8 V and above.
7
LED1
INPUT, POWER
This pin sinks to ground the current flowing into the first LED, and is intended to be used in
backlight application. The current is limited to 30 mA max. (Note 2)
8
LED2
INPUT, POWER
This pin sinks to ground the current flowing into the second LED, and is intended to be used
in backlight application. The current is limited to 30 mA max. (Note 2)
9
LED3
INPUT, POWER
This pin sinks to ground the current flowing into the third LED, and is intended to be used in
backlight application. The current is limited to 30 mA max. (Note 2)
10
LED4
INPUT, POWER
This pin sinks to ground the current flowing into the fourth LED, and is intended to be used
in backlight application. The current is limited to 30 mA max. (Note 2)
On the other hand, LED4 can be disconnected when only three LEDs are used in the
backlight application. (Table 1)
11
LED5
INPUT, POWER
This pin sinks to ground the current flowing into the fifth LED (100 mA max), and is intended
to be used in Flash application. (Note 2)
12
LED6
INPUT, POWER
This pin sinks to ground the current flowing into the sixth LED (100 mA max), and is
intended to be used in Flash or high power application. (Note 2)
13
PWRGND
POWER
This pin provides the ground reference for the power elements and must be connected to
the system ground by a heavy track. Using the ground plane technique is strongly
recommended. Care must be observed to minimize the total parasitic inductance between
the pin and the ground plane.
14
LED7
INPUT, POWER
This pin sinks to ground the current flowing into the seventh LED (100 mA max), and is
intended to be used in flash or high power application. (Note 2)
15
LED8
INPUT, POWER
This pin sinks to ground the current flowing into the eighth LED (100 mA max), and is
intended to be used in flash or high power application. (Note 2)
16
17
18
C1N
C1P
VOUT
POWER
POWER
OUTPUT, POWER
This pin is the second side of the C1 fly capacitor.
This pin is the first side of the C1 fly capacitor.
This pin provides the output power to the external LED. Since the regulation is based on a
current loop, the voltage will varies as the output current varies in the application. The Vout
pin must be bypassed to GND by a 4.7 m F ceramic capacitor. (Note 3)
19
PVBAT
INPUT, POWER
This pin provides the supply voltage to the charge pump converter. The pin must be
connected to the AVbat supply source and bypassed to GND by a 10 m F/16 V ceramic
capacitor. (Note 3) Using a power plane is recommended.
20
21
22
23
24
C2N
C2P
C3P
C3N
AVbat
POWER
POWER
POWER
POWER
INPUT, POWER
This pin is the second side of the C2 fly capacitor.
This pin is the first side of the C2 fly capacitor.
This pin is the second side of the C3 fly capacitor.
This pin is the first side of the C3 fly capacitor.
This pin provides the supply voltage to the analog and digitals blocks. The pin must be
connected to the PVbat supply source and bypassed to GND by a 1 m F/16 V ceramic
capacitor. (Note 3) Using a power plane is recommended.
1. To achieve a good accuracy of the LED current, 1% tolerance resistor, with 100 ppm stability, or better, shall be used. The reference current
is internally mirrored and sized according to the programmed value for a given external LED.
2. Total DC?DC output current is limited to 500 mA.
3. Ceramic X7R, ESR < 50 m W ESL < 0.5 nH, SMD types capacitors are mandatory to achieve the Iout specifications. On the other hand, care
must be observed to take into account the DC bias impact on the capacitance value; see ceramic capacitor manufacturer data sheets.
http://onsemi.com
4
相关PDF资料 |
PDF描述 |
|---|---|
| MAX4995AAUT+T | IC CURR LIMIT SWITCH SOT23-6 |
| ECM12DCWN | CONN EDGECARD 24POS DIP .156 SLD |
| TC1304-ZI0EUN | IC REG DL BCK/LINEAR SYNC 10MSOP |
| RCM08DRSI-S288 | CONN EDGECARD 16POS .156 EXTEND |
| TC1304-ZA0EUNTR | IC REG DL BCK/LINEAR SYNC 10MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NCP561 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:AC-DC Offline Switching Controllers/Regulators |
| NCP561/D | 制造商:未知厂家 制造商全称:未知厂家 功能描述:150 mA CMOS Low Iq Low-Dropout Voltage Regulator |
| NCP5612 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:High Efficiency Ultra Small Thinnest White LED Driver |
| NCP5612GEVB | 功能描述:LED 照明开发工具 NCP5612 EVAL BRD RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| NCP5612MUTBG | 功能描述:LED照明驱动器 WHITE LED DRIVER- 2LED-SW RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。