- 您现在的位置：买卖IC网 > PDF目录20880 > NMG1215SC (Murata Power Solutions Inc)CONV DC/DC 2W 12VIN 15VOUT SIP PDF资料下载
参数资料
| 型号： | NMG1215SC |
| 厂商： | Murata Power Solutions Inc |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | CONV DC/DC 2W 12VIN 15VOUT SIP |
| 产品培训模块： | Low Power DC/DC Converters <5W |
| 标准包装： | 25 |
| 系列： | NMG |
| 类型： | 隔离 |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 10.8V |
| 电压 - 输入（最大）： | 13.2V |
| Voltage - Output 1： | 15V |
| 电流 - 输出（最大）： | 133mA |
| 电源（瓦） - 制造商系列： | 2W |
| 电压 - 隔离： | 1kV（1000V） |
| 安装类型： | 通孔 |
| 封装/外壳： | 7-SIP 模块（4 引线） |
| 尺寸/尺寸： | 0.77" L x 0.30" W x 0.40" H（19.6mm x 7.6mm x 10.2mm） |
| 包装： | 管件 |
| 工作温度： | -40°C ~ 85°C |
| 效率： | 88% |
| 电源（瓦特）- 最大： | 2W |
| 产品目录页面： | 2717 (CN2011-ZH PDF) |
| 其它名称： | 811-1709-5 |
NMG Series
Isolated 2W Single Output DC/DC Converters
TEMPERATURE DERATING GRAPH
3
2
1
85°C
Safe Operating Area
0
-40
0
50
100
150
Ambient Temperature (°C)
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage,
applied for a speci?ed time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions NMG series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 minute.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
The NMG series has been recognized by Underwriters Laboratory for functional insulation. Both input and output should normally be maintained within SELV limits i.e. less than
42.4V peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation sys-
tem. The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier; but then the circuitry on both sides of the
barrier must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry
according to safety standard requirements.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials,
construction and environment. The NMG series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While
parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically
polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We
therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from speci?ed test voltage.
This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further
insulation system of physical spacing or barriers.
SAFETY APPROVAL
The NMG series has been recognised by Underwriters Laboratory (UL) to UL 60950 for functional insulation in a maximum ambient temperature of 85oC and/or case temperature
limit of 130oC. Case temperature measured on the face opposite the pins. File number E151252 applies.
The NMG Series of converters are not internally fused so to meet the requirements of UL 60950 an input line fuse should always be used. An anti-surge 2A should be used for
NMG05xxSC models, and an anti-surge 0.75A should be used for NMG12xxSC models. All fuses should be UL approved and rated to at least the maximum allowable DC input
voltage.
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of
260°C for 10 seconds. The pin termination ?nish is Tin Plate, Hot Dipped over Matte Tin with Nickel
Preplate. This series are backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs
www.murata-ps.com/support
KDC_NMG.E01 Page 3 of 7
相关PDF资料 |
PDF描述 |
|---|---|
| SD103B-F | DIODE SCHOTTKY 30V 400MW DO-35 |
| ECC10DCMI | CONN EDGECARD 20POS .100 WW |
| 3M 8805 SQUARE-2"-100 | TAPE ADHESIVE TRANSFER 2" SQ |
| P51-1000-A-F-M12-4.5OVP-000-000 | SENSOR 1000PSI 1/4-18NPT .5-4.5V |
| EBM08DRYH | CONN EDGECARD 16POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NMG1224SC | 制造商:Murata Power Solutions 功能描述: |
| NMG1505SC | 制造商:Murata Power Solutions 功能描述:DC/DC TH 2W 15-5V SIP - Bulk 制造商:Murata Power Solutions 功能描述:DC/DC CONVERTER 5V 400MA 2W 制造商:Murata Manufacturing Co Ltd 功能描述:DC/DC Converters 2W 15Vin 5Vout Single Output 制造商:Murata Manufacturing Co Ltd 功能描述:DC/DC TH 2W 15-5V SIP 制造商:Murata Power Solutions 功能描述:DC-DC CONV, ISO POL, 1 O/P, 2W, 400mA, 5V, DC / DC Converter Type:Isolated POL, DC / DC Converter Output Type:Fixed, Input Voltage DC Min:13.5V, Input Voltage DC Max:16.5V, No. of Outputs:1, Output Voltage Nom.:5V, Depth:19.65mm , RoHS Compliant: Yes |
| NMG1509SC | 功能描述:DC/DC转换器 2W 15Vin 9Vout Single Output RoHS:否 制造商:Murata Power Solutions 产品:Isolated 输出功率:2 W 输入电压范围:13.5 V to 16.5 V 输入电压（标称）:15 V 输出端数量:1 输出电压（通道 1）:9 V 输出电流（通道 1）:222 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Through Hole 封装 / 箱体尺寸: |
| NMG1512SC | 制造商:Murata Power Solutions 功能描述:DC/DC TH 2W 15-12V SIP - Bulk 制造商:Murata Power Solutions 功能描述:DC/DC CONVERTER 12V 167MA 2W 制造商:Murata Manufacturing Co Ltd 功能描述:DC/DC TH 2W 15-12V SIP 制造商:Murata Power Solutions 功能描述:DC-DC CONV, ISO POL, 1 O/P, 2W, 167mA, 12V, DC / DC Converter Type:Isolated POL, DC / DC Converter Output Type:Fixed, Input Voltage DC Min:13.5V, Input Voltage DC Max:16.5V, No. of Outputs:1, Output Voltage Nom.:12V, Depth:19.65mm , RoHS Compliant: Yes |
| NMG1515SC | 功能描述:DC/DC转换器 2W 15Vin 15Vout Single Output RoHS:否 制造商:Murata Power Solutions 产品:Isolated 输出功率:2 W 输入电压范围:13.5 V to 16.5 V 输入电压（标称）:15 V 输出端数量:1 输出电压（通道 1）:15 V 输出电流（通道 1）:133 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Through Hole 封装 / 箱体尺寸: |
发布紧急采购，3分钟左右您将得到回复。