- 您现在的位置：买卖IC网 > PDF目录189254 > NRH2410T4R7MN (TAIYO YUDEN CO LTD) 1 ELEMENT, 4.7 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD PDF资料下载
参数资料
| 型号： | NRH2410T4R7MN |
| 厂商： | TAIYO YUDEN CO LTD |
| 元件分类： | 通用定值电感 |
| 英文描述： | 1 ELEMENT, 4.7 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 4/12页 |
| 文件大小： | 290K |
| 代理商： | NRH2410T4R7MN |
wound0407_reli-RP5
wound0407_reli_e-01
PRECAUTIONS
This catalog contains the typical specication only due to the limitation of space. When you consider purchase of our products, please check our specication.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. Circuit Design
Precautions
Operating environment
1. The products described in this specication are intended for use in general electronic equipment,(ofce supply equipment, telecommunications systems,
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (trafc systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
Precautions
Land pattern design
1. Please refer to a recommended land pattern.
Technical
consider-
ations
Land pattern design
Surface Mounting
Mounting and soldering conditions should be checked beforehand.
Applicable soldering process to this products is reow soldering only.
3. Considerations for automatic placement
Precautions
Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
consider-
ations
Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
Precautions
Reow soldering
1. Please contact any of our ofces for a reow soldering, and refer to the recommended condition specied.
2. This products is reow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reow soldering.
Lead free soldering
1. When using products with lead free soldering, we request to use them after conrming of adhesion, temperature of resistance to soldering heat, soldering etc
sufciently.
Recommended conditions for using a soldering iron (NR10050 Type)
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350
Duration - 3 seconds or less
The soldering iron should not directly touch the inductor.
Technical
consider-
ations
Reow soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
BRC1608, BRL2012, BRL2518,
NR30/40/50/60/80, NRV30, NRG40,
NR10050 Type
BRC2016, BRL3225 Type BRC2518, BRFL2518
NRH24/30, NRS50/60 Type
Recommended reow condition (Pb free solder)
Temperatur
e
300
200
100
0
90 30sec
150 180
30 10sec
230
min
5sec max
Peak
260 0/ 5
eating Time sec
5sec max
Temperatur
e
300
200
100
0
90 30sec
150 180
30 10sec
230
min
Peak
250 5/ 0
eating Time sec
5sec max
Temperatur
e
eating Time sec
300
200
100
0
90 30sec
150 180
30 10sec
230
min
Peak
250 0/ 5
5. Cleaning
Precautions
Cleaning conditions
1. Washing by supersonic waves shall be avoided.
Technical
consider-
ations
Cleaning conditions
1. If washing by supersonic waves, supersonic waves may cause broken products.
6. Handling
Precautions
Handling
1. Keep the product away from all magnets and magnetic objects.
Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.
Packing
1. Please avoid accumulation of a packing box as much as possible.
Technical
consider-
ations
Breakaway PC boards (splitting along perforations)
1. Planning pattern congurations and the position of products should be carefully performed to minimize stress.
Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
Pick-up pressure
1. Damage and a characteristic can vary with an excessive shock or stress.
Packing
1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box.
7. Storage conditions
Precautions
Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
Recommended conditions
Ambient temperature : 0 40
Humidity
: Below 70% RH
The ambient temperature must be kept below 30 . Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Technical
consider-
ations
Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
SMD Inductors
相关PDF资料 |
PDF描述 |
|---|---|
| NRH2410T3R3MN | 1 ELEMENT, 3.3 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD |
| NRH2410T220MN | 1 ELEMENT, 22 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD |
| NRH2410T1R0NN4 | 1 ELEMENT, 1 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD |
| NRS6010T4R7N | 1 ELEMENT, 4.7 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD |
| NRS6010T100M | 1 ELEMENT, 10 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NRH2410T4R7MNV | 功能描述:4.7μH Shielded Wirewound Inductor 670mA 348 mOhm Max Nonstandard 制造商:taiyo yuden 系列:NRH 包装:剪切带（CT） 零件状态:有效 类型:绕线 材料 - 磁芯:铁氧体 电感:4.7μH 容差:±20% 额定电流:670mA 电流 - 饱和值:880mA 屏蔽:屏蔽 DC 电阻（DCR）:348 毫欧最大 不同频率时的 Q 值:- 频率 - 自谐振:50MHz 等级:AEC-Q200 工作温度:-40°C ~ 125°C 频率 - 测试:100kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.094" 长 x 0.094" 宽（2.40mm x 2.40mm） 高度 - 安装（最大值）:0.039"（1.00mm） 标准包装:1 |
| NRH2410T6R8MN | 功能描述:固定电感器 INDCTR SMD 6.8uH 20% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| NRH2410TR68NN4 | 功能描述:固定电感器 INDCTR SMD .68uH 30% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| NRH2412T100MNGH | 功能描述:固定电感器 INDUCTOR SMD 10uH +/- 20% TOL RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| NRH2412T100MNGHV | 功能描述:10μH Shielded Wirewound Inductor 450mA 720 mOhm Max Nonstandard 制造商:taiyo yuden 系列:NRH 包装:剪切带（CT） 零件状态:有效 类型:绕线 材料 - 磁芯:铁氧体 电感:10μH 容差:±20% 额定电流:450mA 电流 - 饱和值:810mA 屏蔽:屏蔽 DC 电阻（DCR）:720 毫欧最大 不同频率时的 Q 值:- 频率 - 自谐振:29MHz 等级:AEC-Q200 工作温度:-40°C ~ 125°C 频率 - 测试:100kHz 安装类型:表面贴装 封装/外壳:非标准 大小/尺寸:0.094" 长 x 0.094" 宽（2.40mm x 2.40mm） 高度 - 安装（最大值）:0.047"（1.20mm） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。