wound0407_reli-RP2
wound0407_reli_e-01
RELIABILITY DATA
This catalog contains the typical specication only due to the limitation of space. When you consider purchase of our products, please check our specication.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
12. Adhesion of terminal electrode
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Shall not come off PC board.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
Test Method and Remarks
BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reow.
Applied force
: 10N to X and Y directions.
Duration
: 5s.
Solder cream thickness : 0.15mm.
10N, 5s
BRC1608, NR10050 Type :
Applied force : 5N to X and Y directions.
Duration
: 5s.
8. Resistance to exure of substrate
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
No damage.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
Test Method and Remarks
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reow. As illustrated below, apply force in the direction of the arrow indicating until deection of the test board
reaches to 2 mm.
Test board size
: 100 40 1.0
Test board material
: glass epoxy-resin
Solder cream thickness : 0.12 (BR Series)
0.10 (NR30/40, NRV30, NRH24/30,NRG40)
0.15 (NR50/60/80, NRS50/60)
Force Rod
Board
Test Sample
20
10
R230
R5
45 2mm
Land dimension BRC1608
0.55
0.8
0.9
Land dimension BRL2012
0.65
0.9
1.4
Land dimension BRL3225
1.0
1.6
2.7
Land dimension NR30, NRH30, NRV30
0.8
1.4
2.7
Land dimension NR60, NRS60
1.6
3.1
5.7
Land dimension NR, NRS50
1.5
2.1
4.0
0.7
0.8
1.8
Land dimension
2016
Land dimension BRL2518,BRC2518,BRFL2518
0.65
1.5
1.95
Land dimension NRH24
0.7
0.75
2.0
Land dimension NR40, NRG40
1.2
1.6
3.7
Land dimension NR80
1.8
3.8
7.5
Printed board thickness : 1.0mm
Unit : mm
9. Insulation resistance : between wires
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
10. Insulation resistance : between wire and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
11. Withstanding voltage : between wires and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
13. Resistance to vibration
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within
10%
No signicant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
Test Method and Remarks
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reow.
Then it shall be submitted to below test conditions.
Frequency Range
10 55Hz
Total Amplitude
1.5mm (May not exceed acceleration 196m/s2)
Sweeping Method
10Hz to 55Hz to 10Hz for 1min.
Time
X
For 2 hours on each X, Y, and Z axis.
Y
Z
Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.