- 您现在的位置：买卖IC网 > PDF目录21928 > NSE-5310-ASSU (ams)IC ENCODER LINEAR 20-TSSOP PDF资料下载
参数资料
| 型号： | NSE-5310-ASSU |
| 厂商： | ams |
| 文件页数： | 15/22页 |
| 文件大小： | 0K |
| 描述： | IC ENCODER LINEAR 20-TSSOP |
| 产品培训模块： | Miniature Motion Control Overview |
| 标准包装： | 74 |
| 传感范围： | 10mT ~ 40mT |
| 类型： | 线性，旋转编码器 - 可编程 |
| 电源电压： | 3 V ~ 3.6 V，4.5 V ~ 5.5 V |
| 电流 - 电源： | 21mA |
| 电流 - 输出（最大）： | 4mA |
| 输出类型： | 数字式，开漏极 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
| 其它名称： | 179910023 |
NSE-5310
Datasheet - A p p l i c a t i o n I n f o r m a t i o n
Figure 12. PWM Output Signal
Position
0 μm
(Pos 0)
PW MIN
1μs
4098μs
PW MAX
1999.5 μm
(Pos 4095)
4097μs
1/f PWM
8.7 Magnetic Strip Requirements
The NSE-5310 requires a magnetic strip with alternate poles (North-South) of pole length of 1 mm and pole pair length of 2 mm. A half pole is
required at each end of the strip. The length of the strip determines the maximum measured stroke; it must be 3 mm greater than the stroke in 1
mm increments (1.5 mm on each end).
A circular magnet may be used to achieve off-axis rotary encoding.
Table 13. Magnetic Strip Requirements
8.7.1
Parameter
Pole length
Pole pair length
Magnetic strip length
Magnetic strip area
Magnetic field temp drift
Mounting the Magnet
Value
1 mm
2 mm ± 1.2%
Stroke + 3 mm
1 mm X 2 mm
-0.2%/K max
Note
Accuracy of magnetic pole length determines accuracy of linear
measurement
The magnet strip must be in 1 mm increments. A ? pole is required
at each end.
Size recommended for TSSOP package
Recommended - for example Samarium Cobalt ReComa28 is -
0.035%/K
Vertical Distance: As a rule of thumb, the gap between chip and magnet should be ? of the pole length, that is Z=0.5mm for the 1.0mm pole
length of the magnets. However, the gap also depends on the strength of the magnet. The NSE-5310 automatically adjusts for fluctuating
magnet strength by using an automatic gain control (AGC). The vertical distance should be set such that the NSE-5310 is in the “green” range.
See Z-axis Range Indication (“Red/Yellow/Green” Indicator) on page 14 for more details.
Alignment of Multi-pole Magnet and IC: When aligning the magnet strip or ring to the NSE-5310, the centerline of the magnet strip should
be placed exactly over the Hall array. A lateral displacement in Y-direction (across the width of the magnet) is acceptable as long as it is within
the active area of the magnet. The active area in width is the area in which the magnetic field strength across the width of the magnet is constant
with reference to the centerline of the magnet.
www.ams.com
Revision 1.5
15 - 22
相关PDF资料 |
PDF描述 |
|---|---|
| NFL21SP507X1C3D | FILTER LC HIGH FREQ 12PF 0805 |
| AS5306B-ATSU | IC ENCODER LINEAR 20-TSSOP |
| AS5304A-ATSU | IC ENCODER LINEAR 20-TSSOP |
| NFL21SP407X1C3D | FILTER LC HIGH FREQ 16PF 0805 |
| AS5040-ASSU | IC ENCODER PROG 10-BIT 16-SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NSE6041 | 制造商:Microsemi Corporation 功能描述:RAYTHEON 11465917 REV A - Bulk |
| NSE6047 | 制造商:Microsemi Corporation 功能描述:HW DWG 2N3767 - Bulk |
| NSE6509 | 制造商:Microsemi Corporation 功能描述:CUST P/N 1379AS654 LAWRENCE DIVISION ) - Bulk |
| NSE7332 | 制造商:Microsemi Corporation 功能描述:CUST P/N 12325157 ( LAWRENCE DIVISION ) - Bulk |
| NSE7505 | 制造商:WESTINGHOUSE ELECTRIC COR 功能描述: 制造商:WSTHSE 功能描述: |
发布紧急采购，3分钟左右您将得到回复。