- 您现在的位置：买卖IC网 > PDF目录363705 > NTE7132 (NTE Electronics, Inc.) Integrated Circuit Horizontal and Vertical Deflection Controller for VGA/XGA and Multi-Frequency Monitors PDF资料下载
参数资料
| 型号： | NTE7132 |
| 厂商： | NTE Electronics, Inc. |
| 英文描述： | Integrated Circuit Horizontal and Vertical Deflection Controller for VGA/XGA and Multi-Frequency Monitors |
| 中文描述： | 集成电路水平和垂直偏转控制器为VGA / XGA和多频显示器 |
| 文件页数： | 5/7页 |
| 文件大小： | 49K |
| 代理商： | NTE7132 |
Functional Description:
Horizontal Sync Separator and Polarity Correction
An AC
–
coupled video signal or a DC
–
coupled TTL sync signal (H only or composite sync) is input
on Pin9. Video signals are clamped with top sync on 12.8V, and are sliced at 1.4V. This results in a
fixed absolute slicing level of 120mV relative to top sync.
DC
–
coupled TTL sync signals are also sliced at 1.4V, however with the clamping circuit in current limi-
tation. The polarity of the separated sync is detected by internal integration of the signal, then the po-
larity is corrected.
The polarity information is fed to the VGA mode detector. The corrected sync is the input signal for
the vertical sync integrator and the P
LL1
stage.
Vertical Sync Separator, Polarity Correction and Vertical Sync Integrator
DC
–
coupled vertical TTL sync signals may be applied to Pin10. They are sliced at 1.4V. The polarity
of the separated sync is detected by internal integration, then polarity is corrected. The polarity infor-
mation is fed to the VGA mode detector. If Pin10 is not used, it must be connected to GND.
The separated V
i sync
signal from Pin10, or the integrated composite sync signal from Pin9 (TTL or
video) directly triggers the vertical oscillator.
VGA Mode Detector and Mode Output
The three standard VGA modes and a 4th not fixed mode are decoded by the polarities of the horizon-
tal and the vertical sync input signals. An external resistor (from V
P
to Pin7) is necessary to match
this function. In all three VGA modes the correxct amplitudes are activated. The presence of the 4th
mode is indicated by HIGH on Pin7. This signal can be used externally to switch any horizontal or
vertical parameters.
VGA Mode Detector Input
For multi
–
frequency operation the voltage on Pin7 must be externally forced to a level of < 50mV. Ver-
tical amplitude pre
–
settings for VGA are then inhibited. The delay time between vertical trigger pulse
and the start of vertical deflection changes from 575 to 300
μ
s (575
μ
s is needed for VGA). The vertical
amplitude then remains constant in a frequency range from 50 to 110Hz.
Clamping and Blanking Generator
A combined clamping and blanking pulse is available on Pin8. The lower level of 2.1V can be the
blanking signal derived from line flyback, or the vertical blanking pulse from the internal vertical oscillator.
Vertical blanking equals the delay between vertical sync and the start of vertical scan. By this, an opti-
mum blanking is acheived for VGA/XGA as well as for multi
–
frequency operation (selectable via
Pin7).
The upper level of 3.9V is the horizontal clamping pulse with internally fixed pulse width of 1
μ
s. A
mono flop, which is triggered by the trailing edge of the horizontal sync pulse, generates this pulse.
P
LL1
Phase Detector
The phase detector is a standard one using switched current sources. The middle of the sync is
compared with a fixed point of the oscillator sawtooth voltage. The PLL filter is connected to Pin17.
Horizontal Oscillator
This oscillator is a relaxation type oscillator. Its frequency is determined mainly by the capacitor on
Pin19.
A frequency range of one octave is acheived by the current on Pin18. The
1 control voltage from
Pin17 is fed via a buffer amplifier and an attenuator to the current reference Pin18 to acheive a high
DC loop gain. Therefore, changes in frequency will not affect the phase relationship between horizon-
tal sync pulses and line flyback pulses.
相关PDF资料 |
PDF描述 |
|---|---|
| NTE7133 | Integrated Circuit Horizontal and Vertical Deflection Controller for VGA/XGA and Autosync Monitors |
| NTE7134 | Integrated Circuit Horizontal and Vertical Deflection Controller for Monitors |
| NTE7135 | Integrated Circuit Vertical Deflection Power Amplifier for Monitors |
| NTE7136 | Integrated Circuit Vertical Deflection Power Amplifier for Monitors |
| NTE7137 | Integrated Circuit Advanced Monitor Video Controller |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NTE7133 | 制造商:NTE Electronics 功能描述: |
| NTE7134 | 制造商:NTE Electronics 功能描述:IC - HORIZONTAL/VERTICAL DEFLECTION CONTROLLER FORMONITORS VCC = 12V TYPICAL 32- 制造商:NTE Electronics 功能描述:IC, VIDEO SYNC; Output Synch Type:Composite, Horizontal, Vertical; Supply Voltage Min:9.2V; Supply Voltage Max:16V; TV / Video Case Style:DIP; No. of Pins:32; Operating Temperature Min:0C; Operating Temperature Max:70C 制造商:NTE Electronics 功能描述:Horizontal and Vertical Deflection Controller 32-Pin PDIP |
| NTE7135 | 制造商:NTE Electronics 功能描述:IC-VERT DEFL POWER AMP 制造商:NTE Electronics 功能描述:Vertical Deflection Amplifier 9-Pin(9+Tab) SIP |
| NTE7136 | 制造商:NTE Electronics 功能描述:IC-VERT DEFLECTION CKT 制造商:NTE Electronics 功能描述:IC, VIDEO PROCESO; Video Processor Application:Colour Monitor / TV Systems; Supply Voltage Min:9V; Supply Voltage Max:60V; IC Mounting:Through Hole; TV / Video Case Style:SIP; No. of Pins:9; Supply Voltage Range:9V to 60V |
| NTE7137 | 制造商:NTE 制造商全称:NTE Electronics 功能描述:Integrated Circuit Advanced Monitor Video Controller |
发布紧急采购，3分钟左右您将得到回复。