- 您现在的位置：买卖IC网 > PDF目录8141 > OKX-T/5-W5N-C (Murata Power Solutions Inc)DC-DC CONVRT 0.7525-3.6V 5A 5SIP PDF资料下载
参数资料
| 型号： | OKX-T/5-W5N-C |
| 厂商： | Murata Power Solutions Inc |
| 文件页数： | 13/13页 |
| 文件大小： | 0K |
| 描述： | DC-DC CONVRT 0.7525-3.6V 5A 5SIP |
| 标准包装： | 300 |
| 系列： | Okami™ OKX-T/5-W5 |
| 类型： | 非隔离（POL） |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 2.4V |
| 电压 - 输入（最大）： | 5.5V |
| Voltage - Output 1： | 0.7525 ~ 3.6 V |
| 电流 - 输出（最大）： | 5A |
| 电源（瓦） - 制造商系列： | 17W |
| 特点： | 具有远程开/关功能和 UVLO |
| 安装类型： | 通孔 |
| 封装/外壳： | 5-SIP 模块 |
| 尺寸/尺寸： | 0.90" L x 0.28" W x 0.40" H（22.9mm x 7.1mm x 10.2mm） |
| 包装： | 托盘 |
| 工作温度： | -40°C ~ 85°C |
| 效率： | 95% |
| 电源（瓦特）- 最大： | 18W |
| 其它名称： | 811-2621 |
OKX T/5-W5 Series
Adjustable 5-Amp SIP Non-Isolated DC/DC Converters
Output Voltage Adustment
The output voltage may be adjusted over a limited range by connecting an
OKX-T/5-W5
R TRIM ( ? ) = ____________
external trim resistor (Rtrim) between theTrim pin and Ground.The Rtrim resistor
is recommended to have a ±0.5% accuracy (or better) with low temperature
coef?cient, ±100 ppm/°C or better. Mount the resistor close to the converter with
very short leads or use a surface mount trim resistor.
In the tables below, the calculated resistance is given. Do not exceed the
speci?ed limits of the output voltage or the converter’s maximum power rating
when applying these resistors. Also, avoid high noise at the Trim input. However,
to prevent instability, you should never connect any capacitors to Trim.
Output Voltage
3.3 V.
2.5 V.
1.8 V.
1.5 V.
1.2 V.
1.0 V.
0.7525 V.
Resistor Trim Equation:
21070
V OUT – 0.7525V
Calculated Rtrim (KΩ)
3.160
6.947
15.004
23.077
41.973
80.021
∞ (open)
–5110
Soldering Guidelines
Murata Power Solutions recommends the speci?cations below when installing these
converters. These speci?cations vary depending on the solder type. Exceeding these
speci?cations may cause damage to the product. Your production environment may dif-
fer; therefore please thoroughly review these guidelines with your process engineers.
Wave Solder Operations for through-hole mounted products (THMT)
For Sn/Ag/Cu based solders:
Product Label
Because of the small size of these products, the product label contains a
character-reduced code to indicate the model number and manufacturing
date code. Not all items on the label are always used. Please note that the label
differs from the product photograph on page 1. Here is the layout of the label:
Maximum Preheat Temperature
Maximum Pot Temperature
115° C.
270° C.
Mfg.
date
code
X00016
YMDX Rev.
Product code
Revision level
Maximum Solder Dwell Time
For Sn/Pb based solders:
Maximum Preheat Temperature
Maximum Pot Temperature
Maximum Solder Dwell Time
7 seconds
105° C.
250° C.
6 seconds
Figure 4. Label Artwork Layout
The label contains three rows of information:
First row – Murata Power Solutions logo
Second row – Model number product code (see table)
Third row – Manufacturing date code and revision level
Model Number
Product Code
OKX-T/5-W5N-C
X00005
OKX-T/5-W5P-C
X01005
The manufacturing date code is four characters:
First character – Last digit of manufacturing year, example 200 9
Second character – Month code (1 through 9 and O through D)
Third character – Day code (1 through 9 = 1 to 9, 10 = O and
11 through 31 = A through Z)
Fourth character – Manufacturing information
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mans?eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy :
Refer to: http://www.murata-ps.com/requirements/
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Speci?cations are subject to change without
notice. ? 2013 Murata Power Solutions, Inc.
www.murata-ps.com/support
MDC_OKX_T/5-W5 Series.A02 Page 13 of 13
相关PDF资料 |
PDF描述 |
|---|---|
| OKX-T/3-D12P-C | DC-DC CONVRT 0.7525-5.5V 3A 5SIP |
| OSTTJ030150 | TERM BLOCK PLUG 7.62MM 3POS |
| OSTKG140080 | CONN TERM BLK HEADER 14POS 5MM |
| OSTVK077250 | CONN HEADER 7POS 5.0MM 45DEG PCB |
| OSTVF067251 | CONN TERM BLK HEADER 6POS 5MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| OKxxx5-R52 | 制造商:Ohmite Mfg Co 功能描述: |
| OKY | 制造商:MURATA-PS 制造商全称:Murata Power Solutions Inc. 功能描述:Adjustable Output 3 and 5-Amp DOSA-SMT DC/DC Converters |
| OKY2-T/10-D12N-C | 功能描述:DC/DC转换器 12Vin 0.7525-5.5Vout 10A 50W seq/track RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| OKY2-T/10-D12P-C | 功能描述:DC/DC转换器 12Vin 0.7525-5.5Vout 10A 50W seq/track RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| OKY2-T/10-W5N-C | 功能描述:DC/DC转换器 5Vin .75-3.6Vout 10A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
发布紧急采购，3分钟左右您将得到回复。