- 您现在的位置：买卖IC网 > PDF目录18682 > OPB123B (TT Electronics/Optek Technology)SWITCH SLOTTED OPTIC PHOTOLOGIC PDF资料下载
参数资料
| 型号： | OPB123B |
| 厂商： | TT Electronics/Optek Technology |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | SWITCH SLOTTED OPTIC PHOTOLOGIC |
| 标准包装： | 1 |
| 系列： | Photologic® |
| 检测距离： | 0.080"（2.03mm） |
| 检测方法： | 可传导的 |
| 输出配置： | NPN - 开路集电极，反相 |
| 安装类型： | 通孔 |
| 电流 - 电源： | 15mA |
| 电源电压： | 4.75 V ~ 5.25 V |
| 响应时间： | 70ns |
| 封装/外壳： | PCB 安装 |
Photologic
?/DIV>
Slotted Optical Switch
OPB120A, OPB120B, OPB121A, OPB121B
OPB122A, OPB122B, OPB123A, OPB123B
OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 08/2011
Page 1 of 5
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Features:
" Choice of output configuration
" Printed circuit board mounting
" Opaque plastic housing
" Low profile
" 0.080 (2.03 mm) wide slot
" 0.275 (6.99 mm) lead spacing
Description:
The OPB120 through OPB123 devices consist of an infrared emitting diode and a Photologic?sensor (which is a
monolithic integrated circuit that incorporates a linear amplifier and a Schmitt Trigger). The OPB120 series have
an LED and Photologic?sensor mounted on opposite sides of a 0.080 (2.03 mm) wide gap of an opaque
housing. The OPB12_A series have a molded 0.040 (1.02 mm) wide apertures located over both the emitter and
the Photologic?sensor. The OPB12_B seriesseries have a molded 0.040 (1.016 mm) wide apertures located
over the emitter and 0.010 (0.254 mm) over the Photologic?sensor. All devices in this series have the added
stability utilizing hysteresis built into the amplification circuitry.
The electrical output can be specified as either buffered Totem-Pole (OPB 120A, OPB120B), buffered Open-
Collector (OPB121A, OPB121B), Inverted Totem-Pole (OPB122A, OPB122B), or Inverted Open-Collector
(OPB123A, OPB123B).
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Product Photo Here
RoHS
Applications:
" Mechanical switch
replacement
" Speed indication
(tachometer)
" Mechanical limit
indication
" Edge sensing
" Object sensing
Ordering Information
Part
Number
Sensor
Photologic?
Aperture
Emitter/
Sensor
OPB120A
0.04" / 0.04"
OPB120B
0.04" / 0.01"
OPB121A
Open-Collector
0.04" / 0.04"
OPB121B
0.04" / 0.01"
OPB122A
Inverted Totem-
Pole
0.04" / 0.04"
OPB122B
0.04" / 0.01"
OPB123A
Inverted Open-
Collector
0.04" / 0.04"
OPB123B
0.04" / 0.01"
Totem-Pole
Pin # Description
1
Cathode
2
Anode
3
V
CC
4
Output
5
Ground
DIMENSIONS ARE IN:
INCHES
[ MILLIMETERS]
相关PDF资料 |
PDF描述 |
|---|---|
| XRCWHT-L1-0000-00A03 | LED COOL WHITE 500MA 7X9 SMD |
| OPB123A | SWITCH SLOTTED OPTIC PHOTOLOGIC |
| XPEAMB-L1-R250-00203 | LED AMBER 500MA 3.45X3.45 SMD |
| OPB697BZ | SWITCH PHOTOLOGIC OPTICAL FLAG |
| 465P72 | CABLE R/A SGL-END MALE 5POS 6' |
相关代理商/技术参数 |
参数描述 |
|---|---|
| OPB12492 | 制造商:OPT 功能描述:OPTEK |
| OPB125A | 制造商:OPTEK 制造商全称:OPTEK 功能描述:REFLECTIVE OBJECT SENSOR |
| OPB15-DAW | 制造商:Leviton Manufacturing Co 功能描述: |
| OPB15-DW | 制造商:Leviton Manufacturing Co 功能描述: |
| OPB16450UART | 制造商:XILINX 制造商全称:XILINX 功能描述:DS433 August 18, 2004 Product Specification |
发布紧急采购，3分钟左右您将得到回复。