- 您现在的位置：买卖IC网 > PDF目录18675 > OPB917BOCZ (TT Electronics/Optek Technology)SWITCH SLOTTED OPTICAL WIRE LDS PDF资料下载
参数资料
| 型号： | OPB917BOCZ |
| 厂商： | TT Electronics/Optek Technology |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | SWITCH SLOTTED OPTICAL WIRE LDS |
| 标准包装： | 1 |
| 系列： | Photologic® |
| 检测距离： | 0.200"（5.08mm） |
| 检测方法： | 可传导的 |
| 输出配置： | NPN - 开路集电极，缓冲器 |
| 安装类型： | 底座安装 |
| 电流 - 电源： | 7mA |
| 电源电压： | 4.5 V ~ 16 V |
| 响应时间： | 50ns |
| 封装/外壳： | 模块，预接线 |
OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 04/2013
Page 1 of 4
Photologic?Slotted Optical Switch
OPB917 Series
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPB917BOCZ Open-Collector
OPB917BZ 10K Pull-Up
OPB917IZ Inverted 10K Pull-Up
OPB917IOCZ Inverted Open-Collector
Features:
" Low power consumption
" Data rates to 250 kBaud
" Choice of two logic states and two electrical outputs
" 24 (610 mm) minimum 26 AWG UL listed wires
" Slot width 0.20 (5.08 mm)
" Slot Depth 0.86 (21.84 mm)
Description:
The OPB917 series of Photologic?photo integrated circuit switches provide optimum flexibility. Each switch
consists of an infrared Light Emitting Diode (LED) and a Photologic?photo integrated circuit, mounted in an
opaque housing with clear windows for dust protection. The deep slot allows for a longer reach of the optical path
from the 0.650 (16.5 mm) mounting plane. Internal apertures are 0.010 x .060 (.25 mm x 1.52 mm) for the
Photologics S side and 0.05 x 0.06 (1.27 mm x 1.52 mm) for the LED E side.
Devices in this series exhibit stable performance over supply voltages ranging from 4.5 V to 16.0 V, and may be
specified as buffered or inverted with an internal 10 k& pull-up resistor or open collector output. Devices are TTL/
LSTTL compatible and can drive up to 10 TTL loads.
Custom electrical, wire or cabling are available. Contact your local representative or OPTEK for more information.
Applications:
" Mechanical switch replacement
" Speed indication (tachometer)
" Mechanical limit indication
" Edge sensing
Part
Number
LED Peak
Wavelength
Sensor
Photologic?
Slot Width/
Depth
Aperture
Emitter/
Sensor
Lead Length /
Wire
OPB917BZ
880 nm
10K Pull-Up
0.200 /
0.635
0.05" / 0.01"
24" / 26 AWG
Wire
OPB917IZ
Inv-10K Pull-Up
OPB917BOCZ
Open-Collector
OPB917IOCZ
Inv-Open-Collector
Ordering Information
RoHS
Light ON
output High
Light ON
output High
Light ON
output Low
Light ON
output Low
Color Description
Red
Anode
Black Cathode
White Vcc
Blue
Output
Green Ground
相关PDF资料 |
PDF描述 |
|---|---|
| XMLHVW-Q0-0000-0000HS3E8 | LED XM-L HIGH VOLTAGE WHITE |
| XMLHVW-Q0-0000-0000HS4F7 | LED XM-L HIGH VOLTAGE WHITE |
| OPB943W51Z | SWITCH SLOTTED OPTICAL WIDE GAP |
| XREWHT-L1-0000-00908 | LED COOL WHITE 7X9MM SMD |
| OPB942W51Z | SWITCH SLOTTED OPTICAL WIDE GAP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| OPB917BZ | 功能描述:光学开关（透射型，光电IC输出） Slotted Opt Switch RoHS:否 制造商:Optek 输出设备:Totem Pole, Buffer 槽宽:3.18 mm 光圈宽度:1.27 mm 正向电流:40 mA 最大工作温度:+ 70 C 最小工作温度:- 40 C 封装: |
| OPB917BZ | 制造商:TT Electronics / OPTEK Technology 功能描述:Optical Sensor (Switch) Transmissive / S |
| OPB917I | 功能描述:SWITCH SLOTTED OPTICAL WIRE LDS RoHS:否 类别:传感器，转换器 >> 光学 - 光断续器 - 槽型 - 逻辑输出 系列:Photologic® 产品变化通告:Product Discontinuation 03/Dec/2009 标准包装:50 系列:OPTOLOGIC® 检测距离:0.197"（5mm） 检测方法:可传导的 输出配置:NPN - 开路集电极，缓冲器 安装类型:通孔 电流 - 电源:5mA 电源电压:4.5 V ~ 16 V 响应时间:70ns 封装/外壳:PCB 安装 |
| OPB917IOC | 功能描述:SWITCH SLOTTED OPTICAL WIRE LDS RoHS:否 类别:传感器，转换器 >> 光学 - 光断续器 - 槽型 - 逻辑输出 系列:Photologic® 产品变化通告:Product Discontinuation 03/Dec/2009 标准包装:50 系列:OPTOLOGIC® 检测距离:0.197"（5mm） 检测方法:可传导的 输出配置:NPN - 开路集电极，缓冲器 安装类型:通孔 电流 - 电源:5mA 电源电压:4.5 V ~ 16 V 响应时间:70ns 封装/外壳:PCB 安装 |
| OPB917IOCZ | 功能描述:光学开关（透射型，光电IC输出） Slotted Opt Switch RoHS:否 制造商:Optek 输出设备:Totem Pole, Buffer 槽宽:3.18 mm 光圈宽度:1.27 mm 正向电流:40 mA 最大工作温度:+ 70 C 最小工作温度:- 40 C 封装: |
发布紧急采购，3分钟左右您将得到回复。