- 您现在的位置：买卖IC网 > PDF目录6811 > OPIA6010ATRA (TT Electronics/Optek Technology)PHOTOCOUPLER SMD ANLG OUT 6-PIN PDF资料下载
参数资料
| 型号： | OPIA6010ATRA |
| 厂商： | TT Electronics/Optek Technology |
| 文件页数： | 1/23页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER SMD ANLG OUT 6-PIN |
| 产品目录绘图： | OPIA604 Circuit |
| 标准包装： | 1 |
| 通道数： | 1 |
| 输入类型： | AC，DC |
| 电压 - 隔离： | 5000Vrms |
| 电流传输比（最小值）： | 60% @ 1mA |
| 电流传输比（最大）： | 600% @ 1mA |
| 输出电压： | 60V |
| 电流 - 输出 / 通道： | 50mA |
| 电流 - DC 正向(If)： | 50mA |
| Vce饱和（最大）： | 300mV |
| 输出类型： | 有基极的晶体管 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-SMD |
| 包装： | 标准包装 |
| 其它名称： | 365-1449-6 |
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Features:
5 Pin
?
?
?
?
3,750 or 5,000 Vrms electrical isolation
Choice of a Single and Dual LED
Phototransistor or Photo Darlington Sensor
Low-cost plastic Dual-In-Line (DIP) package
Agency Approvals:
?
?
UL Certification No: E58730
VDE No: 40026624,40026625
6 Pin
Description:
The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photo
Darlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation
voltage of 3,750 or 5,000 Volts(RMS), these product meet typical power system isolation requirements.
Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation
between two power systems while maintaining the ability to transmit information from one power system to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and
photosensor configurations are available depending on the system requirements.
The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog
photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
CTR =
Photosensor ? Current
LED ? Current
=
20 mA
10 mA
* 100 = 200
All SMD product is shipped in tape and reel with “TR” identified on the end of the part number.
Example: OPI4N35ATRE is a 6-Pin SMD shipped in tape and reel (TR).
.
Applications:
? High voltage isolation
? PCBoard power system isolation
?
?
?
Industrial equipment power isolation
Medical equipment power isolation
Office equipment
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.6 5/10
Page 1 of 23
相关PDF资料 |
PDF描述 |
|---|---|
| OSTHB201180 | CONN TERM BLOCK 20POS 10MM |
| DC0019/03-H48-6G-0.3-2A | H48-6G RECT 0.3MM W/ADH |
| MF-RHT200-2 | FUSE PTC RESETTABLE |
| MF-RX185-005 | FUSE PTC RESETTABLE |
| MF-RX160-005 | FUSE PTC RESETTABLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| OPIA6010ATRE | 制造商:OPTEK TECHNOLOGY INC 功能描述:OPTOCOUPLER, SMD, ANALOG OUTPUT, 6-PIN |
| OPIA6010ATUA | 功能描述:晶体管输出光电耦合器 50mA 60-600CRT% RoHS:否 制造商:Vishay Semiconductors 输入类型:DC 最大集电极/发射极电压:70 V 最大集电极/发射极饱和电压:0.4 V 绝缘电压:5300 Vrms 电流传递比:100 % to 200 % 最大正向二极管电压:1.65 V 最大输入二极管电流:60 mA 最大集电极电流:100 mA 最大功率耗散:100 mW 最大工作温度:+ 110 C 最小工作温度:- 55 C 封装 / 箱体:DIP-4 封装:Bulk |
| OPIA6010ATUE | 制造商:OPTEK TECHNOLOGY INC 功能描述:OPTOCOUPLER, SMD, ANALOG OUTPUT, 6-PIN |
| OPIA6010DTUA | 功能描述:晶体管输出光电耦合器 50mA 5000CRT% RoHS:否 制造商:Vishay Semiconductors 输入类型:DC 最大集电极/发射极电压:70 V 最大集电极/发射极饱和电压:0.4 V 绝缘电压:5300 Vrms 电流传递比:100 % to 200 % 最大正向二极管电压:1.65 V 最大输入二极管电流:60 mA 最大集电极电流:100 mA 最大功率耗散:100 mW 最大工作温度:+ 110 C 最小工作温度:- 55 C 封装 / 箱体:DIP-4 封装:Bulk |
| OPIA6010DTUE | 制造商:OPTEK TECHNOLOGY INC 功能描述:OPTOCOUPLER, DIP , ANALOG OUTPUT, 6-PIN |
发布紧急采购，3分钟左右您将得到回复。