- 您现在的位置：买卖IC网 > PDF目录18783 > P100BR (TPI (Test Products Int))PROBE W/READOUT 100MHZ X10 1.2M PDF资料下载
参数资料
| 型号： | P100BR |
| 厂商： | TPI (Test Products Int) |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | PROBE W/READOUT 100MHZ X10 1.2M |
| 产品目录绘图： | Oscilloscope Probe |
| 标准包装： | 1 |
| 系列： | P100 |
| 类型： | 无源式，带读数 |
| 衰减值： | 10:1 |
| 带宽： | 100MHz |
| 电阻 - 输入： | 10M |
| 电压 - 最大： | CAT I 600V，CAT II 300V |
| 电容 - 输入： | 16pF |
| 线缆长度： | 47.244"（1200.00mm） |
| 其它名称： | 290-1050 |
Terminology
Oscilloscope / Differential Probes
TPI offers a
complete
line of...
CO, Combustibles &
Combustion (CEA)
Refrigerant Leak
Detectors
Digital Manometers
Temperature Contact &
IR Instruments
IAQ: Air Flow /
Humidity
Oscilloscope / Differential Probe Terminology
>> Attenuation: Ratio of the output signal to the input signal. Attenuation should remain constant
decreasing by 3dB only as the frequency increases to the maximum bandwidth.
>> Bandwidth: The maximum -3dB frequency that can be expected.
>> Cable Length : Length of the cable from the end of the probe to the end of the connector. It is
important to use a probe with just enough cable length for your needs. Long cables increase the
capacitance and propagation delay of the probe.
>> Compensation Range : The range a probe can be compensated to match the input capacitance of
Use TPI Probes
with:
Bench Top,
Portable, Analog,
and Oscilloscopes
MARKETS
Electronic
Oscilloscope / Differential Probe Selection
Selecting the correct oscilloscope probe ensures accuracy and can
improve the performance of your test instrument. TPI offers a
wide range of high quality oscilloscope probes designed to
meet the most demanding applications.
The IP series monolithic probes have switchable
attenuation and are available in 60 and 250MHz. These
Handheld
Oscilloscopes
Digital Multimeters &
the test equipment it is being used with.
>> IEC 1010 : Probes with the IEC 1010 category rating have been designed for safety.
Communication
Commercial
probe.
probes are ideal for technicians that need a basic oscilloscope
Clamp-on Meters
Accessories & Kits
Test Products
International, Inc.
Headquarters:
9615 SW Allen Blvd.
Beaverton, OR 97005
USA
503-520-9197
Fax: 503-520-1225
email:
info@tpi-thevalueleader.com
>> Input Impedance : The total resistance and capacitance as measured at the tip of the probe. This
specification is used to define the loading effect of a probe. At frequencies under 1MHz the input
resistance of the probe will have the most influence. At higher frequencies the input capacitance will
have the most influence.
>> Max Input Voltage : The maximum voltage the probe can be used at.
>> Max Differential Voltage: The maximum differential voltage that can be measured by a
Distributed By:
differential probe
>> Readout : Probes with this capability are compatible with readout function oscilloscopes that
automatically detect and display the attenuation factor of the probe.
>> Rise Time : The time required for the leading edge of a pulse to rise from 10% to 90% of its final
value.
Industrial
APPLICATIONS
Logic signal and
waveform tests
Measure voice /
data signals
Analyze power
quality
Test motor control
circuits
The slimline design P and SP series probes are available in fixed or switchable attenuation.
These series of probes are perfect for the technician needing additional features such as
replaceable cable and interchangeable probe tip. The compensation adjustment for these probes
is located in the BNC to eliminate noise pickup.
TPI also offers three models of high voltage differential probes all with high common mode
rejection, wide bandwidth, and fast rise times. Differential probes enable the viewing of signals
not referenced to earth ground and provide better performance than a matched pair of single
ended oscilloscope probes when measuring these types of signals.
Several important factors must be taken into account when selecting the proper probe.
? The probe should have sufficient bandwidth and rise time for the test instrument and
application. Choose a probe with at least an equal bandwidth as the scope it will be used with.
Test Products
International, Ltd.
>> CMRR: Common Mode Rejection Ratio. A measure of a differential probes ability to reject any
For best performance a probe with twice the bandwidth as the scope should be selected.
342 Bronte St. South
Unit 9
Milton, Ontario L9T
5B7
Canada
905-693-8558
Fax: 905-693-0888
email:
info@tpicanada.com
Test Products
International UK Ltd.
Longley House, East Park
Crawley, West Sussex
RH10 6AP England
Tel: +44 (0)1293 561212
signals common to both test points in a differential measurement
Distributed by:
The
Value
Leader ?
Refer to pages 2-3
? For oscilloscope probes, the input capacitance of your oscilloscope should
be within the compensation range specification of the probe. In
addition, if your oscilloscope has readout function, select a
probe with this capability.
? For differential probes, make sure the maximum
differential voltage is adequate for your application
and the common mode rejection specification meets
the requirements of the tests being performed.
Refer to the oscilloscope and differential probe specification tables
to select the correct probe for your application.
Fax: +44 (0)1293813465
contactus@tpieurope.com
To learn about the entire
line of TPI products visit:
www.tpi-thevalueleader.com
L TAW OP 0705
Copyright ? 2005 Test Products International, Inc.
for specifications.
相关PDF资料 |
PDF描述 |
|---|---|
| P200B | PROBE OSC 200MHZ X10 1.2M CABLE |
| ARD15124 | SWITCH COAX LATCH SPDT 18GHZ 24V |
| ARD15112 | SWITCH COAX LATCH SPDT 18GHZ 12V |
| 1P20B | PROBE OSCILLOSCOPE 15MHZ X1 |
| ARD15105 | SWITCH COAX LATCH SPDT 18GHZ 5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| P-100C/A06 | 功能描述:BATT NICAD STD 1000MAH 2/3C SIZE RoHS:否 类别:电池产品 >> 电池，充电式（蓄电池） 系列:- MSDS 材料安全数据表:Nickel Metal Hydride Battery MSDS 标准包装:1,000 系列:TWICELL 电池化学:镍金属氢化物 电池大小:AAA 电压 - 额定:1.2V 容量:930mAh 尺寸/尺寸:- 端接类型:焊片 放电速率:186mA 标准充电电流:100mA 标准充电时间:16小时 重量:0.029 磅（13.15g） 装运信息:- 其它名称:SY153T |
| P100DA171J | 制造商:GE Sensing & Inspection Technologies / Thermometrics 功能描述:NTC Themoprobe,BeadInGlass,0.25",170ohm,5%,Leaded, Bulk 制造商:Thermometrics/Amphenol 功能描述:NTC Themoprobe,BeadInGlass,0.25",170ohm,5%,Leaded, Bulk |
| P100DA172J | 制造商:GE Sensing & Inspection Technologies / Thermometrics 功能描述:NTC Themoprobe,BeadInGlass,0.25",1700ohm,5%,Leaded, Bulk |
| P100-E4-250-G | 制造商:SPC Multicomp 功能描述:PLUNGER LARGE POINT 制造商:SPC Multicomp 功能描述:PLUNGER, LARGE POINT 制造商:SPC Multicomp 功能描述:PLUNGER, LARGE POINT; Connector Type:Spring Probe; Contact Material:Beryllium Copper; Current Rating:3A; Contact Plating:Gold; Connector Colour:Gold; SVHC:No SVHC (19-Dec-2012) ;RoHS Compliant: Yes |
| P100-H-250-G | 制造商:SPC Multicomp 功能描述:PLUNGER SERRATED 制造商:SPC Multicomp 功能描述:PLUNGER, SERRATED 制造商:SPC Multicomp 功能描述:PLUNGER, SERRATED; Connector Type:Spring Probe; Contact Material:Beryllium Copper; Current Rating:3A; Contact Plating:Gold; Connector Colour:Gold; SVHC:No SVHC (19-Dec-2012) ;RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。