参数资料
| 型号： | P2993 |
| 厂商： | Switchcraft Inc. |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | COVER FOR SN37A14B PHONE JACK |
| 标准包装： | 1 |
| 系列： | SN |
| 附件类型： | 帽盖（盖） |
| 适用于相关产品： | 1/4" 直角电话插孔系列 SN37 和 SN49 |
| 颜色： | 黑 |
JACK SCHEMATICS
Circuit Types: Jacks normally have through circuits, shunt
circuits, and/or isolated switching circuits, either individually or
in various combinations. The chart below shows schematics of
39 common jacks - many more combinations are possible, but
these are the most commonly used. A basic description of the
switching action of each jack accompanies each schematic.
Military Identification: Military specifications covering phone
jacks use a special code to describe jack functions. Jack
schematic descriptions are coded J-1 through J-13 (as
Notation
1-A
1-B
1-C
1-D
Meaning
One, SPST switching circuit. Also known as NO
(normally open) or “make” circuit.
One, SPST switching circuit. Also known as NC
(normally closed) or “break” circuit.
One, SPDT switching circuit. Also known as transfer
or “break” before “make” circuit.
One, SPDT switching circuit. Also known as “make”
appropriate) to coincide with Federal Item Identification
Guides for Supply Cataloging. One or more groups of suffix
numbers/letters identify isolated switching circuits used.
Suffixes identify the switching by industry recognized notation,
i.e., 1-A, 1-B, 1-C, 1-D, etc. See chart below.
before “break” circuit.
NOTE: Number indicates the quantity of circuit - 2-A means 2, A circuits.
Terminals locations shown on jack schematics do not necessarily coincide
with physical locations on jacks. Not all circuit types available on all jacks.
Single open circuit. (J1.)
Single closed circuit,
Single closed circuit. (J4).
Double open circuit. (J2).
Single open circuit.
sleeve common. (J3).
Isolated switching
“make” circuit. (J1-1-A).
Transfer circuit. (J5).
Tip closed, ring
open. (J10).
Tip closed, ring open
(common to sleeve). (J6).
Single open circuit.
Isolated switching
Double closed circuit,
ring common to
“break” circuit. (J1-1B).
sleeve. (J13).
Single closed. Isolated
switching “make”
circuit. (J4-1A).
Double open circuit.
Isolated switching–
separate “break” and
Double closed
circuit. (J7).
Single closed circuit
Isolated switching
“break” circuit. (J4-1B).
Single closed circuit.
Isolated switching
transfer circuit. (J4-1C).
Single closed circuit–
“make” before
“break”. (J8).
Double closed circuit.
Isolated switching
“break” circuit. (J7-1B).
Single open circuit.
Isolated switching
transfer circuit. (J1-1C).
Double open circuit.
Isolated switching
transfer circuit. (J2-1C).
Double open circuit.
Isolated switching
“make” circuit.
make circuits (J2-1A-1B).
(J2-1A).
Double open circuit.
Isolated switching–
separate “make”
circuits on both tip and
ring. (J2-2A).
Double closed circuit.
Isolated switching
“make” circuit on ring
spring. (J7-1A).
Single closed circuit
plus “make” before
“break”. Isolated
switching–“make”
before “break”
Single open circuit.
Isolated switching–
separate transfer and
“make” circuits.
(J1-1A-1C).
Single closed circuit.
Isolated switching
“break” circuit. Sleeve
common to isolated
switching circuit throw.
circuit. (J8-1D).
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
(J4-1B).
SWITCHCRAFT, INC. 5555 N. Elston Ave. ? Chicago, IL 60630
相关PDF资料 |
PDF描述 |
|---|---|
| P2994 | COVER 1/4" R/A PHONE JACK |
| P2441 | WASHER FLAT NICKEL-PLATED STEEL |
| MC74VHC1G32DFT1G | IC GATE OR SGL 2INPUT SOT-353 |
| JCAP | POWER JACK SEAL CAP |
| P2442 | WASHER PHENOLIC FLAT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| P29930-M003 | 制造商:Amphenol Corporation 功能描述:.3 METER ETHERNET CABLE 制造商:SINE SYSTEMS 功能描述:CONNECTOR |
| P2-99-37-11 | 制造商:Southco 功能描述: |
| P2994 | 功能描述:电话连接器 COVER RoHS:否 制造商:Switchcraft 标准:1/4 in 开关配置:Switched 型式:Female 位置/触点数量: 端接类型:Solder 安装风格:Chassis (Panel) 方向: |
| P29949-160 | 制造商:Amphenol PCD 功能描述: |
| P299-93-610-10-002000 | 制造商:MILLMAX 功能描述: |
发布紧急采购，3分钟左右您将得到回复。