参数资料
型号: P80C557E6
厂商: NXP Semiconductors N.V.
英文描述: Single-chip 8-bit microcontroller(单片8位微控制器)
中文描述: 单芯片8位微控制器(单片8位微控制器)
文件页数: 15/64页
文件大小: 476K
代理商: P80C557E6
Philips Semiconductors
Product specification
P83C557E6/P80C557E6
Single-chip 8-bit microcontroller
1999 Mar 02
15
6.4
The P8xC557E6 has six 8–bit ports. Ports 0 to 3 are the same as in
the 80C51, with the exception of the additional functions of Port 1.
The parallel I/O function of Port 4 is equal to that of Ports 1, 2 and 3.
Port 5 has a parallel input port function, but has no function as an
output port.
I/O Facilities
The SDA and SCL lines serve the serial port SI01 (I
2
C). Because
the I
2
C–bus may be active while the device is disconnected from
V
DD,
these pins, are provided with open drain drivers.
Ports 0, 1, 2, 3, 4 and 5 perform the following alternative functions:
Port 0 :
provides the multiplexed low–order address and
data bus used for expanding the P8xC557E6 with
standard memories and peripherals.
Port 1 :
Port 1 is used for a number of special functions:
4 capture inputs (or external interrupt request inputs
if capture information is not utilized)
– external counter input
– external counter reset input
Port 2 :
provides the high–order address bus when the
P8xC557E6 is expanded with external Program
Memory and/or external Data Memory.
Port 3 :
pins can be configured individually to provide:
– external interrupt request inputs
– counter inputs
– receiver input and transmitter output of seri port
SIO 0 (UART)
– control signals to read and write external Data
Memory
Port 4 :
can be configured to provide signals indicating a
match between timer counter T2 and its compare
registers.
Port 5 :
may be used in conjunction with the ADC inter-
face.Unused analog inputs can be used as digital
inputs. As Port 5 lines may be used as inputs to the
ADC, these digital inputs have an inherent hystere-
sis to prevent the input logic from drawing too much
current from the power lines when driven by analog
signals. Channel to channel crosstalk should be tak-
en into consideration when both digital and analog
signals are simultaneously input to Port 5 (see DC
characteristics).
All ports are bidirectional with the exception of Port 5 which is an
input port.
Pins of which the alternative function is not used may be used as
normal bidirectional I/Os.
The generation or use of a Port 1, Port 3 or Port 4 pin as an
alternative function is carried out automatically by the P8xC557E6
provided the associated Special Function Register bit is set HIGH.
The pull–up arrangements of Ports 1 – 4 are shown in Figure 9.
Figure 9. I/O buffers in the P8xC557E6 (Ports 1, 2, 3 and 4).
V
DD
QN
2 System Clock Periods
Port
Pin
n
From Port
Latch
V
DD
V
DD
P1
P2
P3
Input Data
Read Port Pin
P1 is turned on for 2 system clock periods after QN makes a 1–to–0 transition.
During this time, P1 also turns on P3 through the inverter to form an additional pull up.
相关PDF资料
PDF描述
P89C58 80C51 8-bit microcontroller family 4K/8K/16K/32K Flash
P89C54X2 80C51 8-bit Flash microcontroller family
P89C54X2BA 80C51 8-bit Flash microcontroller family
P89C54X2BBD 80C51 8-bit Flash microcontroller family
P89C54X2BN 80C51 8-bit Flash microcontroller family
相关代理商/技术参数
参数描述
P80C557E6EBB 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Single-chip 8-bit microcontroller
P80C557E6EFB 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Single-chip 8-bit microcontroller
P80C557E8 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8 BIT MICROCONTROLLER
P80C557E8EFB 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
P80C562 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontroller