参数资料
型号: P83C152JA
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: UNIVERSAL COMMUNICATION CONTROLLER 8-BIT MICROCONTROLLER
中文描述: 8-BIT, MROM, 6 MHz, MICROCONTROLLER, PDIP48
封装: PLASTIC, DIP-48
文件页数: 16/17页
文件大小: 233K
代理商: P83C152JA
8XC152JA/JB/JC/JD
GSC TIMINGS (EXTERNAL CLOCK)
270431–17
NOTES:
1. N.C. pins on PLCC package may be connected to internal die and should not be used in customer applications.
2. It is recommended that both Pin 3 and Pin 33 be grounded for PLCC devices.
3. ‘‘Typicals’’ are based on samples taken from early manufacturing lots and are not guaranteed. The measurements were
made with V
CC
e
5V at room temperature.
4. Capacitive loading on Ports 0 and 2 may cause spurious noise pulses to be superimposed on the V
OL
s of ALE and Ports
1 and 3. The noise is due to external bus capacitance discharging into the Port 0 and Port 2 pins when these pins make 1-
to-0 transitions during bus operations. In the worst cases (capacitive loading
l
100 pF), the noise pulse on the ALE pin may
exceed 0.8V. In such cases it may be desirable to qualify ALE with a Schmitt Trigger, or use an address latch with a Schmitt
Trigger STROBE input.
5. Capacitive loading on Ports 0 and 2 may cause the V
OH
on ALE and PSEN to momentarily fall below the 0.9V
CC
specifi-
cation when the address bits are stabilizing.
6. I
CC
is measured with all output pins disconnected; XTAL1 driven with TCLCH, TCHCL
e
5 ns, V
IL
e
V
SS
a
0.5V, V
IH
e
V
CC
b
0.5V; XTAL2 N.C.; Port 0 pins connected to V
CC
. ‘‘Operating’’ current is measured with EA connected to V
CC
and
RST connected to V
SS
. ‘‘Idle’’ current is measured with EA connected to V
SS
, RST connected to V
CC
and GSC inactive.
7. The specifications relating to external data memory characteristics are also applicable to DMA operations.
8. TQVWX should not be confused with TQVWX as specified for 80C51BH. On 80C152, TQVWX is measured from data
valid to rising edge of WR. On 80C51BH, TQVWX is measured from data valid to falling edge of WR. See timing diagrams.
9. This value is based on the maximum allowable die temperature and the thermal resistance of the package.
10. All specifications relating to external program memory characteristics are applicable to:
EPSEN for PSEN
Port 5 for Port 0
Port 6 for Port 2
when EBEN is at a Logical 1 on the 80C152JB/JD.
11. Same as TCLCH, use External Clock Drive Waveform.
12. Same as TCHCL, use External Clock Drive Waveform.
13. When using the same external clock to drive both the receiver and transmitter, the minimum ECL spec effectively
becomes 195 ns at all frequencies (assuming 0 ns propagation delay) because ECDVT (150 ns) plus ECDSR (45 ns) re-
quirements must also be met (150
a
45
e
195 ns). The 195 ns requirement would also increase to include the maximum
propagation delay between receivers and transmitters.
16
相关PDF资料
PDF描述
P83C152JB UNIVERSAL COMMUNICATION CONTROLLER 8-BIT MICROCONTROLLER
P83C152JC UNIVERSAL COMMUNICATION CONTROLLER 8-BIT MICROCONTROLLER
P83C152JD UNIVERSAL COMMUNICATION CONTROLLER 8-BIT MICROCONTROLLER
P80C251SA16 HIGH-PERFORMANCE CHMOS MICROCONTROLLER
P80C251SB16 HIGH-PERFORMANCE CHMOS MICROCONTROLLER
相关代理商/技术参数
参数描述
P83C152JA-1 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
P83C152JB 制造商:INTEL 制造商全称:Intel Corporation 功能描述:UNIVERSAL COMMUNICATION CONTROLLER 8-BIT MICROCONTROLLER
P83C152JC 制造商:INTEL 制造商全称:Intel Corporation 功能描述:UNIVERSAL COMMUNICATION CONTROLLER 8-BIT MICROCONTROLLER
P83C152JC-1 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
P83C152JD 制造商:INTEL 制造商全称:Intel Corporation 功能描述:UNIVERSAL COMMUNICATION CONTROLLER 8-BIT MICROCONTROLLER