参数资料
型号: P89LPC907FD,112
厂商: NXP Semiconductors
文件页数: 28/51页
文件大小: 0K
描述: IC 80C51 MCU FLASH 1K 8-SOIC
产品培训模块: Migrating from 8/16-Bit MCUs to 32-Bit ARMs
标准包装: 1
系列: LPC900
核心处理器: 8051
芯体尺寸: 8-位
速度: 7.3728MHz
连通性: UART/USART
外围设备: 欠压检测/复位,LED,POR,WDT
输入/输出数: 6
程序存储器容量: 1KB(1K x 8)
程序存储器类型: 闪存
RAM 容量: 128 x 8
电压 - 电源 (Vcc/Vdd): 2.4 V ~ 3.6 V
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
包装: 剪切带 (CT)
配用: 622-1006-ND - SOCKET ADAPTER BOARD
其它名称: 568-1998-1
Philips Semiconductors
P89LPC906/907/908
8-bit microcontrollers with two-clock 80C51 core
Product data
Rev. 05 — 17 December 2004
34 of 51
9397 750 14467
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Reset can be triggered from the following sources:
External reset pin (during power-up or if user congured via UCFG1. This option
must be used for an oscillator frequency above 12 MHz (P89LPC906).)
Power-on detect
Brownout detect
Watchdog Timer
Software reset
UART break character detect reset (P89LPC908).
For every reset source, there is a ag in the Reset Register, RSTSRC. The user can
read this register to determine the most recent reset source. These ag bits can be
cleared in software by writing a ‘0’ to the corresponding bit. More than one ag bit
may be set:
During a power-on reset, both POF and BOF are set but the other ag bits are
cleared.
For any other reset, previously set ag bits that have not been cleared will remain
set.
8.15 Timers/counters 0 and 1
The P89LPC906/907/908 has two general purpose timers which are similar to the
standard 80C51 Timer 0 and Timer 1. These timers have four operating modes
(modes 0, 1, 2, and 3). Modes 0, 1, and 2 are the same for both Timers. Mode 3 is
different. And additional PWM output mode, Mode 6, is provided on the P89LPC907.
8.15.1
Mode 0
Putting either Timer into Mode 0 makes it look like an 8048 Timer, which is an 8-bit
Counter with a divide-by-32 prescaler. In this mode, the Timer register is congured
as a 13-bit register. Mode 0 operation is the same for Timer 0 and Timer 1.
8.15.2
Mode 1
Mode 1 is the same as Mode 0, except that all 16 bits of the timer register are used.
8.15.3
Mode 2
Mode 2 congures the Timer register as an 8-bit Counter with automatic reload.
Mode 2 operation is the same for Timer 0 and Timer 1.
8.15.4
Mode 3
When Timer 1 is in Mode 3 it is stopped. Timer 0 in Mode 3 forms two separate 8-bit
counters and is provided for applications that require an extra 8-bit timer. When
Timer 1 is in Mode 3 it can still be used by the serial port as a baud rate generator for
the P89LPC907 and P89LPC908.
8.15.5
Mode 6 (P89LPC907)
In this mode, the corresponding timer can be changed to a PWM with a full period of
256 timer clocks.
相关PDF资料
PDF描述
P89LPC906FD,112 IC 80C51 MCU FLASH 1K 8-SOIC
P89LPC902FD,112 IC 80C51 MCU FLASH 1K 8-SOIC
P89LPC901FD,112 IC 80C51 MCU FLASH 1K 8-SOIC
DS80C320-ENL IC MCU HI SPEED 33MHZ IND 44TQFP
DS80C323-END IC MCU HI SPEED 18MHZ IND 44TQFP
相关代理商/技术参数
参数描述
P89LPC908 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontrollers with two-clock 80C51 core 1 kB 3 V Flash with 128-byte RAM
P89LPC908FD 功能描述:8位微控制器 -MCU 80C51 1K FL 128B RAM RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
P89LPC908FD,112 功能描述:8位微控制器 -MCU PREF PART P89LPC903FD RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
P89LPC9102 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:8-bit microcontrollers with two-clock accelerated 80C51 core 1 kB 3 V byte-erasable flash with 8-bit A/D converter
P89LPC9102FTK 制造商:NXP Semiconductors 功能描述:MCU 8BIT 80C51 1K FLASH HVSON-10