- 您现在的位置：买卖IC网 > PDF目录69042 > PC14568EDR2 (FREESCALE SEMICONDUCTOR INC) SPECIALTY ANALOG CIRCUIT, PDIP16 PDF资料下载
参数资料
| 型号： | PC14568EDR2 |
| 厂商： | FREESCALE SEMICONDUCTOR INC |
| 元件分类： | 模拟信号调理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDIP16 |
| 封装： | LEAD FREE, PLASTIC, DIP-16 |
| 文件页数： | 6/11页 |
| 文件大小： | 347K |
| 代理商： | PC14568EDR2 |
Sensors
4
Freescale Semiconductor
MC14568
Archived by Freescale Semiconductor, Inc., 2009
Archive
Information
Archive
Information
PIN DESCRIPTIONS
TIMER START (PIN 1)
An internal timer is provided that can be used in various
configurations to allow for a period of reduced smoke
detector sensitivity (“hush”). When a high-to-low transition
occurs at pin 1, the internal timer is reset, the timer mode
enabled, and the circuit reset to a no alarm condition.
I/O (PIN 2)
Pin 2 is an input/output pin designed to be connected to
other smoke units for remote smoke sensing. In a local
smoke condition, this pin is driven high by the unit sensing
smoke. All other units in the network will then go into remote
smoke mode.
LOW-V SET (PIN 3)
Pin 3 is the low voltage set pin. This pin has an internal
fixed bias to monitor the battery. Using an external resistor
from pin 3 to either VDD or VSS allows the user to change
this bias to some fraction of VDD.
TIMER OUTPUT (PIN 4)
This pin is an open drain output that can be used in various
timer configurations to alter the IC’s sensitivity. A high to low
transition on pin 1 causes this output to pulse for 231 internal
clock cycles.
LED (PIN 5)
This pin is the LED cathode connection pin and is driven
low when the LED pulses.
VDD (PIN 6)
This is the positive power supply for the entire IC.
TIMING RESISTOR (PIN 7)
This pin, when tied through a resistor to VDD, works along
with pin 12 to set the bias current that controls the oscillation
frequency.
FEEDBACK (PIN 8)
This is the feedback pin used for driving the piezo electric
element.
VSS (PIN 9)
This is the negative power supply pin for the entire IC
(usually ground).
HORN 1 (PIN 10)
This is one of two pins that drive the horn element (i.e.,
brass and silver).
HORN 2 (PIN 11)
This is one of two pins that drive the horn element (i.e.,
brass and silver).
OSCILLATOR CAP (PIN 12)
This pin, when tied to a low leakage capacitor to VSS,
works with pin 7 to set the internal oscillation frequency.
SENSITIVITY SET (PIN 13)
This pin is set internally to provide the reference sensitivity
for the detect pin (pin 15).
An external resistor from pin 13 to either VDD or VSS can
adjust the sensitivity.
GUARD 1/LOW Z (PIN 14)
This pin provides a low impedance guard for the detect pin
(pin 15) to reduce leakage currents.
DETECT INPUT PIN (PIN 15)
This pin functions as a low leakage smoke detect pin when
used in conjunction with an Ionization type element.
GUARD 2/HIGH Z (PIN 16)
This pin provides a high impedance guard for the detect
pin (pin 15) to reduce leakage currents.
II/O
I/O Current(1)
VI/O = VDD - 2.0 V
VI/O = 1.0 V
No Alarm
Alarm
Charge Dump
225
-75
5.0
—
60
—
μA
mA
I/O Charge Dump Duration
After Local Alarm or Test
2
1.33
1.66
1.99
s
I/O Delay
Alarm Out
2
—
3.0
—
s
VI/O
I/O VIH, VIL
VIH, VDD = 9.0 V
VIL, VDD = 9.0 V
23.2
—
1.5
V
IDD
Supply Current
VDD = 9.0 V
VDD = 12 V
No Alarm, No Loads
6—
—
5.0
—
9.0
12
μA
1. This specification also shows VOH of VDD - 2.0 V and VOL of 1.0 V at respective currents.
2. Negative current is defined as coming out of (sourcing) the specified device pin.
3. Alarm (Smoke) Condition is defined as V15 < V13; No Alarm (No Smoke) Condition as V15 > V13.
4 No Loads means the IC in standby mode with a 0.1
μF capacitor on pin 12 to VSS and an 8.2 MΩ resistor on pin 7 to VDD with Pin 2 tied
low (LED and Horn are off).
Table 2. Electrical Characteristics (continued)
Characteristics noted under conditions TA = +25°C, VDD = 9.0 V, VSS = 0 V, C12 = 0.1 μF (Oscillator Pin) R7 = 8.2 mΩf/fn (timing
resistor pin) unless otherwise noted.
Symbol
Characteristic
Test Condition
Test
Pin
Min
Typ
Max
Unit
相关PDF资料 |
PDF描述 |
|---|---|
| PC33880DWB | BRUSH DC MOTOR CONTROLLER, 2 A, PDSO28 |
| PC33880DW | BRUSH DC MOTOR CONTROLLER, 2 A, PDSO28 |
| PC33880DWBR2 | BRUSH DC MOTOR CONTROLLER, 2 A, PDSO28 |
| PC33880DWR2 | BRUSH DC MOTOR CONTROLLER, 2 A, PDSO28 |
| PC34703PNB/R2 | 18 A SWITCHING REGULATOR, 400 kHz SWITCHING FREQ-MAX, PQCC33 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PC14568P/R2 | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Low-Power CMOS Ionization Smoke Detector with Interconnect and Timer |
| PC147/150 | 制造商:n/a 功能描述:Power Semiconductor |
| PC147C-DVP | 制造商:Texas Instruments 功能描述: |
| PC14C13BL1.5 | 制造商:Panduit Corp 功能描述:Cable Assembly Power Cord 0.458m 16AWG 3 POS Power to 3 POS Power PL-F 制造商:Panduit Corp 功能描述:POWER CORD, 1.5'L (458MM), BLACK - Bulk 制造商:Panduit Corp 功能描述:POWER CORD, 1.50 FT. LENGTH (460.0MM), B |
| PC14C13BL10 | 制造商:Panduit Corp 功能描述:POWER CORD, 10.0 FT. LENGTH (3050.0MM), - Bulk 制造商:Panduit Corp 功能描述:POWER CORD IEC 10' BLACK 制造商:Panduit Corp 功能描述:POWER CORD, 10.00 FT. LENGTH (3050.0MM), |
发布紧急采购，3分钟左右您将得到回复。