- 您现在的位置：买卖IC网 > Datasheet目录56 > PC29.09.0100A (Taoglas Limited)ANTENNA PCB GSM WCDMA Datasheet资料下载
参数资料
| 型号： | PC29.09.0100A |
| 厂商： | Taoglas Limited |
| 文件页数： | 6/13页 |
| 文件大小： | 911K |
| 描述： | ANTENNA PCB GSM WCDMA |
| 标准包装： | 50 |
| 天线类型： | PCB 印制线 |
| 频带数目： | 5 |
| 频率： | 850MHz，900MHz，1.8GHz，1.9GHz，2.1GHz |
| 端子： | MMCX，带 100mm 缆线 |
| 安装类型： | 胶合剂 |
| 高度（最大）： | 0.031"（0.80mm） |
| 包装： | * |
| 其它名称： | 931-1129 |
SPE-11-8-045/B
05-August-2011
Page 6 of 13
6.0 Environmental Conditions and Reliability
6.1 Environmental Conditions
2.1.1 Operation Temperature
-40?/SPAN>C to + 85?/SPAN>C
2.1.2 Storage Temperature
-40?/SPAN>C to + 95?/SPAN>C
2.1.3 Relative Humidity
40% to 95%
6.2 Reliability
Test Items
Procedure
Requirement
hermal Shock
Starting at -40 for 30minutes and then cycled to +85
to remain 30minutes (a complete cycle).
To repeat 5 complete cycles.
(Refer to IEC 68-2-14 Method Na)
1. The value of return loss must be within
product specifications after this test.
2. No physical deformation should be evident.
Storage
Temperature
(Cold)
Samples must be put into -30癈 chamber for 72
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Aa)
1. The value of return loss must be within
product specifications after this test.
2. No physical deformation should be evident.
Storage
Temperature
(Dry Heat)
Samples must be put into +75癈 chamber for 72
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Ba)
1. The value of return loss must be within
product specifications after this test.
2. No physical deformation should be evident.
Operating
Temperature
(Cold)
Samples must be put into -20癈 chamber for 2
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Aa)
1. The value of return loss must met specification
during test/after test
2. No mechanical defects after test.
Operating
Temperature
(Dry Heat)
Samples must be put into +65癈 chamber for 72
hours and samples shall be powered during test.
(Refer to IEC 68-2-1 Method Ba)
1. The value of return loss must met specification
during test/after test
2. no mechanical defects after test.
相关PDF资料 |
PDF描述 |
|---|---|
| PC30.07.0100A | ANTENNA 4-BAND GSM PCB |
| PC30.09.0100A | ANTENNA QUAD BAND CELL W/ CABLE |
| PC81.07.0100A.DB | ANTENNA ISM BAND PCB W/CABLE |
| PC91.07.0100A.DB | ANTENNA ISM BAND PCB W/CABLE |
| PE43503MLI-Z | IC RF DSA 5BIT 50 OHM 24QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PC291NSE7FHA | 制造商:Freescale Semiconductor 功能描述:PC291NSE7FHA - Bulk |
| PC292NSE7KLA | 制造商:Freescale Semiconductor 功能描述:PC292NSE7KLA - Bulk |
| PC29363VK | 制造商:Freescale Semiconductor 功能描述: |
| PC29M05A | 制造商:NEC 制造商全称:NEC 功能描述:THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR |
| PC29M05AHB | 制造商:NEC 制造商全称:NEC 功能描述:THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR |
发布紧急采购，3分钟左右您将得到回复。