参数资料
| 型号： | PC713V0NSZXF |
| 厂商： | Sharp Microelectronics |
| 文件页数： | 10/14页 |
| 文件大小： | 0K |
| 描述： | PHOTOCOUPLER TRAN OUT 6-DIP |
| 产品目录绘图： | PC713 Circuit |
| 标准包装： | 500 |
| 通道数： | 1 |
| 输入类型： | DC |
| 电压 - 隔离： | 5000Vrms |
| 电流传输比（最小值）： | 50% @ 5mA |
| 电流传输比（最大）： | 600% @ 5mA |
| 输出电压： | 80V |
| 电流 - 输出 / 通道： | 50mA |
| 电流 - DC 正向(If)： | 50mA |
| Vce饱和（最大）： | 200mV |
| 输出类型： | 有基极的晶体管 |
| 安装类型： | 通孔 |
| 封装/外壳： | 6-DIP（0.300"，7.62mm），5 引线 |
| 包装： | 管件 |
| 产品目录页面： | 2769 (CN2011-ZH PDF) |
| 其它名称： | 425-2435-5 |
PC713VxNSZXF Series
■ Manufacturing Guidelines
● Soldering Method
Reflow Soldering:
Reflow soldering should follow the temperature profile shown below.
Soldering should not exceed the curve of temperature profile and time.
Please don't solder more than twice.
(?C)
300
Terminal : 260?C peak
( package surface : 250?C peak)
200
Reflow
220?C or more, 60s or less
100
Preheat
150 to 180?C, 120s or less
0
0
1
2
3
4
(min)
Flow Soldering :
Due to SHARP's double transfer mold construction submersion in flow solder bath is allowed under the below
listed guidelines.
Flow soldering should be completed below 270?C and within 10s.
Preheating is within the bounds of 100 to 150?C and 30 to 80s.
Please don't solder more than twice.
Hand soldering
Hand soldering should be completed within 3s when the point of solder iron is below 400?C.
Please don't solder more than twice.
Other notices
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
Sheet No.: D2-A04302EN
10
相关PDF资料 |
PDF描述 |
|---|---|
| 282843-4 | TERM BLOCK 4POS SIDE ENT 10.16MM |
| 284391-6 | TERM BLOCK 6POS SIDE ENT 3.5MM |
| PC123X2YSZ0F | PHOTOCOUPLER TRAN OUT VDE 4-DIP |
| PC123X2YFZ0F | PHOTOCOUPLER TRAN OUT WIDE 4-DIP |
| TC164-JR-0782KL | RES ARRAY 82K OHM 4 RES 1206 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PC713V0YSZX | 功能描述:PHOTOCOUPLER TRAN OUT VDE 6-DIP RoHS:否 类别:隔离器 >> 光隔离器 - 晶体管，光电输出 系列:- 标准包装:1,000 系列:- 通道数:2 输入类型:DC 电压 - 隔离:2500Vrms 电流传输比（最小值）:7% @ 16mA 电流传输比（最大）:50% @ 16mA 输出电压:20V 电流 - 输出 / 通道:8mA 电流 - DC 正向(If):25mA Vce饱和（最大）:- 输出类型:有 Vcc 的晶体管 安装类型:通孔 封装/外壳:8-DIP（0.400"，10.16mm） 包装:管件 其它名称:HCPL-2530W |
| PC713V0YSZXF | 功能描述:晶体管输出光电耦合器 NRND DC Input Trans. Output RoHS:否 制造商:Vishay Semiconductors 输入类型:DC 最大集电极/发射极电压:70 V 最大集电极/发射极饱和电压:0.4 V 绝缘电压:5300 Vrms 电流传递比:100 % to 200 % 最大正向二极管电压:1.65 V 最大输入二极管电流:60 mA 最大集电极电流:100 mA 最大功率耗散:100 mW 最大工作温度:+ 110 C 最小工作温度:- 55 C 封装 / 箱体:DIP-4 封装:Bulk |
| PC713V1 | 制造商:SHARP 制造商全称:Sharp Electrionic Components 功能描述:High Isolation Voltage Type, General Purpose Photocoupler |
| PC713V1NSZX | 制造商:SHARP 制造商全称:Sharp Electrionic Components 功能描述:High Isolation Voltage Type Photocoupler |
| PC713V1YSZX | 制造商:SHARP 制造商全称:Sharp Electrionic Components 功能描述:High Isolation Voltage Type Photocoupler |
发布紧急采购，3分钟左右您将得到回复。