参数资料
型号: PCA8575PW,112
厂商: NXP Semiconductors
文件页数: 18/30页
文件大小: 0K
描述: IC I/O EXPANDER I2C 16B 24TSSOP
产品培训模块: I²C Bus Fundamentals
特色产品: NXP - I2C Interface
标准包装: 63
接口: I²C
输入/输出数: 16
中断输出:
频率 - 时钟: 400kHz
电源电压: 2.3 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 24-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 24-TSSOP
包装: 管件
包括: POR
产品目录页面: 824 (CN2011-ZH PDF)
其它名称: 568-4230-5
935283505112
PCA8575PW
PCA8575PW-ND
PCA8575_2
NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 02 — 21 March 2007
25 of 30
NXP Semiconductors
PCA8575
Remote 16-bit I/O expander for I2C-bus with interrupt
15. Handling information
Inputs and outputs are protected against electrostatic discharge in normal handling.
However, to be completely safe you must take normal precautions appropriate to handling
integrated circuits.
16. Soldering
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note
AN10365 “Surface mount reow
soldering description”.
16.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for ne pitch SMDs. Reow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
16.2 Wave and reow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature prole. Leaded packages,
packages with solder balls, and leadless packages are all reow solderable.
Key characteristics in both wave and reow soldering are:
Board specications, including the board nish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus PbSn soldering
16.3 Wave soldering
Key characteristics in wave soldering are:
相关PDF资料
PDF描述
PCA9535D,118 IC I/O EXPANDER I2C 16B 24SOIC
292204-2 CONN CARD EDGE 8POS DL 2MM TIN
ATTINY44V-10SSUR MCU AVR 4KB FLASH 10MHZ 14-SOIC
ATTINY24-20MUR MCU AVR 2KB FLASH 20MHZ 20QFN
ATTINY24V-10MUR MCU AVR 2KB FLASH 10MHZ 20QFN
相关代理商/技术参数
参数描述
PCA8576C 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates
PCA8576CH/Q900,157 功能描述:LCD 驱动器 UNIVERSAL LCD DRIVER LOW MULTIPLEX RATES RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube
PCA8576CH/Q900/1 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates
PCA8576CH/Q900/1,1 功能描述:LCD 驱动器 MULT DIG/SEG 200KHz RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube
PCA8576CH/Q900/1,118 制造商:NXP Semiconductors 功能描述:Cut Tape 制造商:NXP Semiconductors 功能描述:0