- 您现在的位置：买卖IC网 > PDF目录20841 > PCA9533D/02,118 (NXP Semiconductors)IC LED DRIVER RGB 8-SOIC PDF资料下载
参数资料
| 型号： | PCA9533D/02,118 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 8/24页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVER RGB 8-SOIC |
| 标准包装： | 2,500 |
| 拓扑： | 开路漏极，PWM |
| 输出数： | 4 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光，LED 闪烁器 |
| 类型 - 次要： | RGB |
| 频率： | 400kHz |
| 电源电压： | 2.3 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 带卷 (TR) |
| 工作温度： | -40°C ~ 85°C |
| 配用： | 568-4003-ND - DEMO BOARD LED DIMMER 568-3512-ND - DEMO BOARD UART TO I2C |
| 其它名称： | 935274436118 PCA9533D/02-T PCA9533D/02-T-ND |
NXP Semiconductors
PCA9533
4-bit I 2 C-bus LED dimmer
7. Characteristics of the I 2 C-bus
The I 2 C-bus is for 2-way, 2-line communication between different ICs or modules. The two
lines are a serial data line (SDA) and a serial clock line (SCL). Both lines must be
connected to a positive supply via a pull-up resistor when connected to the output stages
of a device. Data transfer may be initiated only when the bus is not busy.
7.1 Bit transfer
One data bit is transferred during each clock pulse. The data on the SDA line must remain
stable during the HIGH period of the clock pulse as changes in the data line at this time
will be interpreted as control signals (see Figure 7 ).
SDA
SCL
data line
stable;
change
of data
Fig 7.
Bit transfer
data valid
allowed
mba607
7.1.1 START and STOP conditions
Both data and clock lines remain HIGH when the bus is not busy. A HIGH-to-LOW
transition of the data line while the clock is HIGH is de?ned as the START condition (S).
A LOW-to-HIGH transition of the data line while the clock is HIGH is de?ned as the STOP
condition (P) (see Figure 8 ).
SDA
SCL
S
START condition
P
STOP condition
mba608
Fig 8.
De?nition of START and STOP conditions
7.2 System con?guration
A device generating a message is a ‘transmitter’; a device receiving is the ‘receiver’. The
device that controls the message is the ‘master’ and the devices which are controlled by
the master are the ‘slaves’ (see Figure 9 ).
PCA9533_3
? NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 03 — 27 April 2009
8 of 24
相关PDF资料 |
PDF描述 |
|---|---|
| P51-50-S-F-P-4.5OVP-000-000 | SENSOR 50PSI 1/4-18NPT .5-4.5V |
| REC3-2409SRWZ/H4/A/CTRL | CONV DC/DC 3W 9-36VIN 09VOUT |
| REC7.5-4805DRW/H1/A/M/CTRL | CONV DC/DC 7.5W 36-72VIN +/-05V |
| P51-15-S-F-P-4.5OVP-000-000 | SENSOR 15PSI 1/4-18NPT .5-4.5V |
| P51-100-S-S-I12-4.5V-000-000 | SENSOR 100PSI 1/4-18NPT .5-4.5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCA9533DP | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:4-bit I2C LED dimmer |
| PCA9533DP/01 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:4-bit I2C-bus LED dimmer |
| PCA9533DP/01,118 | 功能描述:LED照明驱动器 I2C LED DIMMER 4BIT RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| PCA9533DP/02 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:4-bit I2C-bus LED dimmer |
| PCA9533DP/02,118 | 功能描述:LED照明驱动器 4-BIT I2C-BUS LED DIMMER RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。