参数资料
型号: PCA9534BS3,118
厂商: NXP Semiconductors
文件页数: 13/25页
文件大小: 0K
描述: IC I/O EXPANDER I2C 8B 16HVQFN
特色产品: NXP - I2C Interface
标准包装: 1
接口: I²C,SM 总线
输入/输出数: 8
中断输出:
频率 - 时钟: 400kHz
电源电压: 2.3 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-VFQFN 裸露焊盘
供应商设备封装: 16-HVQFN
包装: 标准包装
包括: POR
其它名称: 568-8706-6
PCA9534_3
NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 03 — 6 November 2006
20 of 25
NXP Semiconductors
PCA9534
8-bit I2C-bus and SMBus low power I/O port with interrupt
13. Handling information
Inputs and outputs are protected against electrostatic discharge in normal handling.
However, to be completely safe you must take normal precautions appropriate to handling
integrated circuits.
14. Soldering
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note
AN10365 “Surface mount reow
soldering description”.
14.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for ne pitch SMDs. Reow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
14.2 Wave and reow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature prole. Leaded packages,
packages with solder balls, and leadless packages are all reow solderable.
Key characteristics in both wave and reow soldering are:
Board specications, including the board nish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus PbSn soldering
14.3 Wave soldering
Key characteristics in wave soldering are:
相关PDF资料
PDF描述
VI-B1F-IY CONVERTER MOD DC/DC 72V 50W
MS3102A18-1PW CONN RCPT 10POS BOX MNT W/PINS
MS3102A18-1P CONN RCPT 10POS BOX MNT W/PINS
VI-B1D-IY CONVERTER MOD DC/DC 85V 50W
PCA9554BS,118 IC I/O EXPANDER I2C 8B 16HVQFN
相关代理商/技术参数
参数描述
PCA9534BS3-T 功能描述:接口-I/O扩展器 8BIT I2C/SMBUS I/O PORT-INTER RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9534BS-T 功能描述:接口-I/O扩展器 8BIT I2C/SMBUS I/O PORT-INTER RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9534D 功能描述:接口-I/O扩展器 8BIT I2C/SMBUS I/O PORT-INTER RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9534D,112 功能描述:接口-I/O扩展器 8BIT I2C/SMBUS I/O RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel
PCA9534D,118 功能描述:接口-I/O扩展器 I2C/SMBUS 8BIT LP RoHS:否 制造商:NXP Semiconductors 逻辑系列: 输入/输出端数量: 最大工作频率:100 kHz 工作电源电压:1.65 V to 5.5 V 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:HVQFN-16 封装:Reel