参数资料
型号: PCA9550D,118
厂商: NXP Semiconductors
文件页数: 25/26页
文件大小: 0K
描述: IC LED DRIVER BLINKER 8-SOIC
标准包装: 2,500
拓扑: 开路漏极,PWM
输出数: 2
内部驱动器:
类型 - 主要: LED 闪烁器
频率: 400kHz
电源电压: 2.3 V ~ 5.5 V
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SO
包装: 带卷 (TR)
工作温度: -40°C ~ 85°C
配用: 568-4002-ND - DEMO BOARD I2C
其它名称: 935272882118
PCA9550D-T
PCA9550D-T-ND
NXP Semiconductors
PCA9550
2-bit I 2 C-bus LED driver with programmable blink rates
18. Legal information
18.1 Data sheet status
Document status [1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
Product status [3]
Development
Quali?cation
Production
De?nition
This document contains data from the objective speci?cation for product development.
This document contains data from the preliminary speci?cation.
This document contains the product speci?cation.
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “De?nitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com .
18.2 De?nitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modi?cations or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
of?ce. In case of any inconsistency or con?ict with the short data sheet, the
full data sheet shall prevail.
18.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation speci?cations and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
speci?ed use without further testing or modi?cation.
Limiting values — Stress above one or more limiting values (as de?ned in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/pro?le/terms , including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or con?ict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
18.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I 2 C-bus — logo is a trademark of NXP B.V.
malfunction of an NXP Semiconductors product can reasonably be expected
19. Contact information
For more information, please visit: http://www.nxp.com
For sales of?ce addresses, please send an email to: salesaddresses@nxp.com
PCA9550_5
? NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 05 — 13 October 2008
25 of 26
相关PDF资料
PDF描述
GEM06DCAN-S189 CONN EDGECARD 12POS R/A .156 SLD
P51-750-S-A-M12-4.5V-000-000 SENSOR 750PSI 1/4-18NPT .5-4.5V
UCH-3.3/10-D24PB-C CONV DC/DC 33W 3.3V 10A
P51-1500-S-E-P-4.5OVP-000-000 SENSOR 1500PSI 3/8-24 UNF 4.5V
P51-3000-S-R-I12-4.5V-000-000 SENSOR 3000PSI M12-1.0 6G 4.5V
相关代理商/技术参数
参数描述
PCA9550DP 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:2-bit I2C LED driver with programmable blink rates
PCA9550DP,118 功能描述:LED照明驱动器 2-BIT I2C FM OD LED RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9550DP,118-CUT TAPE 制造商:NXP 功能描述:PCA9550 Series 2-Bit I2C-Bus LED Driver w/ Programmable Blink Rates - TSSOP - 8
PCA9550DP118 制造商:Rochester Electronics LLC 功能描述: 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述:
PCA9550DP-T 功能描述:LED照明驱动器 2-BIT I2C FM OD LED BLK RST RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N