参数资料
型号: PCA9554D,112
厂商: NXP Semiconductors
文件页数: 15/35页
文件大小: 0K
描述: IC I/O EXPANDER I2C 8B 16SOIC
产品培训模块: I²C Bus Fundamentals
特色产品: NXP - I2C Interface
标准包装: 48
接口: I²C,SM 总线
输入/输出数: 8
中断输出:
频率 - 时钟: 400kHz
电源电压: 2.3 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-SOIC(0.295",7.50mm 宽)
供应商设备封装: 16-SO
包装: 管件
包括: POR
产品目录页面: 826 (CN2011-ZH PDF)
配用: 568-4002-ND - DEMO BOARD I2C
其它名称: 568-1053-5
935269192112
PCA9554D
PCA9554_9554A
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2013. All rights reserved.
Product data sheet
Rev. 9 — 19 March 2013
22 of 35
NXP Semiconductors
PCA9554; PCA9554A
8-bit I2C-bus and SMBus I/O port with interrupt
12. Handling information
All input and output pins are protected against ElectroStatic Discharge (ESD) under
normal handling. When handling ensure that the appropriate precautions are taken as
described in JESD625-A or equivalent standards.
13. Soldering of SMD packages
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note AN10365 “Surface mount reflow
soldering description”.
13.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for fine pitch SMDs. Reflow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
13.2 Wave and reflow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reflow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature profile. Leaded packages,
packages with solder balls, and leadless packages are all reflow solderable.
Key characteristics in both wave and reflow soldering are:
Board specifications, including the board finish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
13.3 Wave soldering
Key characteristics in wave soldering are:
相关PDF资料
PDF描述
PCA9554APW,112 IC I/O EXPANDER I2C 8B 16TSSOP
ATTINY24A-SSUR MCU AVR 2KB FLASH 20MHZ 14SOIC
PCA9621D,118 IC BUS OUTPUT PORT 2WIRE 16SOIC
PCA9536DP/DG,118 IC I/O EXPANDER I2C 4B 8TSSOP
PCF8575TS/1,118 IC I/O EXPANDER I2C 16B 24SSOP
相关代理商/技术参数
参数描述
PCA9554D118 制造商:Rochester Electronics LLC 功能描述: 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述:
PCA9554DB 功能描述:I2C 接口集成电路 I2C I/O EXPANDER GP RoHS:否 制造商:NXP Semiconductors 电源电压-最大:5.5 V 电源电压-最小:2.3 V 最大工作频率:400 KHz 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-16
PCA9554DB,112 功能描述:I2C 接口集成电路 I2C I/O EXPANDER GP RoHS:否 制造商:NXP Semiconductors 电源电压-最大:5.5 V 电源电压-最小:2.3 V 最大工作频率:400 KHz 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-16
PCA9554DB,118 功能描述:I2C 接口集成电路 8-BIT I2C FM TP GPIO INT PU RoHS:否 制造商:NXP Semiconductors 电源电压-最大:5.5 V 电源电压-最小:2.3 V 最大工作频率:400 KHz 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-16
PCA9554DB 制造商:Texas Instruments 功能描述:I/O EXPANDER IC