- 您现在的位置：买卖IC网 > PDF目录15348 > PCF1A331MCL1GS (Nichicon)CAP ALUM 330UF 10V 20% SMD PDF资料下载
参数资料
| 型号： | PCF1A331MCL1GS |
| 厂商： | Nichicon |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | CAP ALUM 330UF 10V 20% SMD |
| 标准包装： | 500 |
| 系列： | CF |
| 电容： | 330µF |
| 额定电压： | 10V |
| 容差： | ±20% |
| 寿命@温度： | 105°C 时为 2000 小时 |
| 工作温度： | -55°C ~ 105°C |
| 特点： | 聚合物 |
| 纹波电流： | 3.7A |
| ESR（等效串联电阻）： | 20 毫欧 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 径向，Can - SMD |
| 尺寸/尺寸： | 0.394" 直径（10.00mm） |
| 高度 - 座高（最大）： | 0.315"（8.00mm） |
| 表面贴装占地面积： | 0.406" L x 0.406" W（10.30mm x 10.30mm） |
| 包装： | 带卷 (TR) |
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
CF
Chip Type, Standard
series
Low ESR, High ripple current.
Load life of 2000 hours at 105°C.
SMD type : Lead free reflow soldering condition at 260°C
peak correspondence.
Compliant to the RoHS directive (2011/65/EU).
CG
Higher
Capacitance,
CS
Long Life
CF
Low ESR
Higher Capacitance
CJ
Specifications
Item
Category Temperature Range
Rated Voltage Range
– 55 to +105°C
2.5 to 25V
Performance Characteristics
Rated Capacitance Range 3.3 to 1500μF
Capacitance Tolerance
± 20%
at 120Hz, 20°C
Tangent of loss angle (tan δ ) Less than or equal to the specified value at 120Hz, 20°C
ESR (
1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current (
2)
Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20°C
Temperature Characteristics
(Max.Impedance Ratio)
Z+105°C / Z+20°C
Z– 55°C / Z+20°C
1.25
1.25
(100kHz)
Endurance
Damp Heat
(Steady State)
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 2000 hours at 105°C
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 1000 hours at 60°C, 90% RH.
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
After soldering the capacitor under the soldering conditions
Resistance to
Soldering Heat
prescribed here, the capacitor shall meet the specifications listed
at right, provided that it's temperature profile is measured at the
capacitor top and the terminal.
Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec.
The duration for over +230°C temperature at capacitor surface
shall not exceed 60 seconds.
In the case of peak temp, less than 250°C, reflow soldering shall
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Within ± 10% of the initial capacitance value ( 3)
130% or less than the initial specified value
130% or less than the initial specified value
Less than or equal to the initial specified value
be two times maximum.
In the case of peak temp, less than 260°C, reflow soldering shall
be once.
Measurement for solder temperature profile shall be made at the
capacitor top and the terminal.
Marking
Navy blue print on the case top
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
3 Initial value : The value before test of examination of resistance to soldering.
Dimensions
Type numbering system (Example : 6.3V 150μF)
Capacitance
Lot No.
Plastic platform
0.3 MAX.
C ± 0.2
Positive
1 2 3 4 5 6 7 8 9 10 11 12 13 14
P C F 0 J 1 5 1 M C L 1 G S
Taping code
φ D Code
（
4 to 6.3 5.5L ） GB
5 to 10 （ L 6 ） GS
Size code
Configuration
Capacitance tolerance ( ± 20%)
Series
Voltage ( j:6.3v)
- 0.4
L +0.1
Negative
Rated capacitance (150 μ F)
Rated voltage (6.3V)
H
(mm)
Series name
Type
Size
φ 4 × 5.5L
φ 5 × 6L
φ 6.3 × 5.5L φ 6.3 × 6L
φ 8 × 7L
φ 8 × 12L
φ 10 × 8L φ 10 × 10L φ 10 × 12.7L
φ D
L
A
4.0
5.4
5.0
5.0
5.9
6.0
6.3
5.4
7.3
6.3
5.9
7.3
8.0
6.9
9.0
8.0
11.9
9.0
10.0
7.9
11.0
10.0
9.9
11.0
10.0
12.6
11.0
B
4.3
5.3
6.6
6.6
8.3
8.3
10.3
10.3
10.3
Voltage
C
E
4.3
1.0
5.3
1.6
6.6
2.1
6.6
2.1
8.3
3.2
8.3
3.2
10.3
4.6
10.3
4.6
10.3
4.6
V
2.5
4
6.3
10
16
20
25
H
0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1
Code
e
g
j
A
C
D
E
Dimension table in next page.
CAT.8100C
相关PDF资料 |
PDF描述 |
|---|---|
| RCM28DSEN-S243 | CONN EDGECARD 56POS .156 EYELET |
| PCF0J471MCL1GS | CAP ALUM 470UF 6.3V 20% SMD |
| UVY2A331MHD | CAP ALUM 330UF 100V 20% RADIAL |
| RCM28DSEH-S243 | CONN EDGECARD 56POS .156 EYELET |
| HSM15DRKN-S13 | CONN EDGECARD 30POS .156 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCF1A331MCL4GS | 功能描述:铝有机聚合物电容器 10volts 330uF 105c 8x12 RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| PCF1A470MCL1GS | 功能描述:铝有机聚合物电容器 47uF 10 Volts 20% SMD Polymer Solid RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| PCF1A470MCL6GS | 功能描述:铝有机聚合物电容器 10volts 47uF 105c 5x6 RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| PCF1A471MCL1GS | 功能描述:铝有机聚合物电容器 470uF 10 Volts 20% SMD Polymer Solid RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| PCF1A471MCL9GS | 功能描述:铝有机聚合物电容器 470uF 10V 20% RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。