参数资料
型号: PE1145TY-FREQ-OUT7
厂商: PLETRONICS INC
元件分类: XO, clock
英文描述: CRYSTAL OSCILLATOR, CLOCK, 170 MHz - 650 MHz, PECL OUTPUT
文件页数: 1/1页
文件大小: 37K
代理商: PE1145TY-FREQ-OUT7
PE1145T LV PECL Series
6 Pad Leadless Surface Mount Oscillator
Enable/ Disable Function
Differential LV PECL Output
Alternate Pinouts Compatible with All Major Suppliers Available
170.00 MHz 650.00 MHz
Standard Specifications
Overall Frequency Stability
PE1145T: ± 50 PPM, PE1144T: ± 25 PPM, PE1120T: ± 20 PPM over Operating Temp. Range
Operating Temperature Range
0 to +80°C is standard, but can be extended to - 40 to +85°C for certain frequencies
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Mechanical:
not to scale
inches (mm)
.400
(10.16)
MAX
May 2002
.560 (14.23) MAX
Vcc
E/D
GND
QN
Solder Pads
19013 36th Ave. West Suite H Lynnwood, WA 98036, USA
Consult factory for higher frequencies
Supply Voltage (Vcc)
3.3 volts ± 10% standard, but 5.0 volts or 2.5 volts also available
Output Waveform
PECL with Differential Output
Logic “1”
Vcc - 1.025 volts minimum
Logic “0”
Vcc - 1.620 volts maximum
Output Load
Output must be terminated into 50 ohms to (Vcc - 2.0 V). See Test Circuit 5 and Note 1.
Enable/Disable Option (E/D)
Part Numbering Guide
Model
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
Frequency in MHz
Special Specifications (choose all that apply)
PE11 45 T Y -- 350.0M
20 = ± 20 PPM
Symmetry
Tr & Tf
45/55% to 55/45% at 50% of Vcc level standard, tighter symmetry available
300 pS max (20 to 80%)
115 mA typical, 130 mA maximum
Supply Current (Icc)
Consult factory
Jitter
Note 1: In the typical PECL 100K logic output Voh is 2.35 volts and Vol is 1.60 volts at 3.3 Vcc. The center voltage of the PECL is therefore1.975 volts.
If a 50 resistor is placed between the output and Vcc – 2 volts (1.3 volts), the current through the resistor is (1.975 – 1.3) / 50 = 13.5 mA.
The same load can be simulated by a resistor of 147 ± 1% ohms to ground (1.975 / 0.0135 = 146.29 ohms). If additional load current is placed
on the output, its load current must be subtracted from the 13.5 mA to calculate a new load resistor. Using similar calculations, use 274 ± 1%
ohms to ground for 5.0V operation.
W
PLE
Q
N.C.
.217 (5.5)
MAX
Consult factory for alternate pinout
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
3
Pl tronics, Inc.
Packaging
Tube or
24mm tape
16mm pitch
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Output enabled when Pin #2 is open or at CMOS Logic “1”;
Output disabled when Pin #2 is at CMOS Logic “0”.
PE11 = Std Pinout
PE3X = Alt Pinout
N.C.
or
.200 (5.08)
1
2
3
6
5
4
.23
(5.8)
.05
(1.3)
.12
(3.0)
3
2
4
5
6
1
E: Extended Operating Temperature Range (- 40 to +85 C)
F: 47.5 /52.5% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts ± 10%
W: Supply Voltage of 2.5 volts ± 5%
Y: Supply Voltage of 5.0 volts ± 10%
°
(see Waveform 2)
相关PDF资料
PDF描述
PE1145TW-FREQ-OUT7 CRYSTAL OSCILLATOR, CLOCK, 170 MHz - 650 MHz, PECL OUTPUT
PE1145TV-FREQ-OUT7 CRYSTAL OSCILLATOR, CLOCK, 170 MHz - 650 MHz, PECL OUTPUT
PE1145BE-FREQ CRYSTAL OSCILLATOR, CLOCK, 1.5 MHz - 250 MHz, PECL OUTPUT
PE1144BY-FREQ CRYSTAL OSCILLATOR, CLOCK, 1.5 MHz - 107 MHz, PECL OUTPUT
PE1145TEFV-FREQ CRYSTAL OSCILLATOR, CLOCK, 180 MHz - 650 MHz, PECL OUTPUT
相关代理商/技术参数
参数描述
PE11472K100 制造商:FDY 功能描述:AF247X100 LOC: 1890I
PE11-472K100 制造商:FDY 功能描述:AF247X100 LOC: 1890I
PE11472M200 制造商:FDY 功能描述:AF247X200
PE11-472M200 制造商:FDY 功能描述:AF247X200
PE114811 制造商:Delphi Corporation 功能描述:12 Way GT 150 Metri-Pack 630 Male Connector