- 您现在的位置：买卖IC网 > Datasheet目录242 > PESD9X7.0L,315 (NXP Semiconductors)DIODE ESD PROTECTION SOD882 Datasheet资料下载
参数资料
| 型号： | PESD9X7.0L,315 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 8/14页 |
| 文件大小： | 0K |
| 描述： | DIODE ESD PROTECTION SOD882 |
| 标准包装： | 10,000 |
| 电压 - 反向隔离（标准值）： | 7V |
| 电压 - 击穿： | 7.5V |
| 功率（瓦特）： | 150W |
| 电极标记： | 单向 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOD-882 |
| 供应商设备封装： | SOD-882 |
| 包装： | 带卷 (TR) |
| 其它名称： | PESD9X7.0L315 |
NXP Semiconductors
PESD9X5.0L; PESD9X7.0L
Unidirectional ESD protection diodes
7. Application information
The PESD9X5.0L and the PESD9X7.0L are designed for the protection of one
unidirectional data or signal line from the damage caused by ESD and surge pulses.
Both devices may be used on lines where the signal polarities are either positive or
negative with respect to ground. The devices provide a surge capability of 150 W
per line for an 8/20 μ s waveform.
line to be protected
(positive signal polarity)
PESD9X5.0/7.0L
GND
line to be protected
(negative signal polarity)
PESD9X5.0/7.0L
GND
unidirectional protection of one line
006aac498
Fig 9.
Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.
2. The path length between the device and the protected line should be minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors , and is
suitable for use in automotive applications.
PESD9XXL_SER
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 December 2010
? NXP B.V. 2010. All rights reserved.
8 of 14
相关PDF资料 |
PDF描述 |
|---|---|
| PF1000A-360 | PWR CORRECTI0N MOD 360VDC |
| PFC375-1024FM | SINGLE OUTPUT 375W 24V WITH FAN |
| PFE1100-12-054NA | FRONT END AC/DC 1100W W/ PFC |
| PFE1100-12-054ND | FRONT END 1100W 12V HI EFFICINCY |
| PFE500S-28/T | PWR SUP AC/DC 85-265VAC 28V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PESDA6V1L | 制造商:未知厂家 制造商全称:未知厂家 功能描述:PRISEMI的防静电TVS管产品 |
| PESDLC523T5VU | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| PESDLC553T5VU | 制造商:未知厂家 制造商全称:未知厂家 功能描述:PRISEMI低电容防静电／浪涌／雷击TVS管 |
| PESDNC5D12VU | 制造商:未知厂家 制造商全称:未知厂家 功能描述:PRISEMI的防静电TVS管产品 |
| PESDNC5D7VU | 制造商:未知厂家 制造商全称:未知厂家 功能描述:PRISEMI的防静电TVS管产品 |
发布紧急采购，3分钟左右您将得到回复。