emifil01_reli-PR3
emil01_reli_e-01
MULTILAYER EMI SUPPRESSION FILTER
*This catalog contains the typical specication only due to the limitation of space. When you consider the purchase of our products, please check our specication.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
■ RELIABILITY DATA
14. Damp Heat steady state
Specied
No mechanical damage.
Insulation resistance (between 1 and 2) : 20MΩ min.
DC resistance (between 1 and 3)
: 2Ω max.
3Ω max. (FK2125T107AL)
【Test Methods and Remarks】
Temperature : 40±2℃
Humidity
: 90 to 95%RH
Duration
: 500±12 hrs
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
15. Loading under Damp Heat
Specied
No mechanical damage.
Insulation resistance (between 1 and 2) : 20MΩ min.
DC resistance (between 1 and 3)
: 2Ω max.
3Ω max. (FK2125T107AL)
【Test Methods and Remarks】
Temperature
: 40±2℃
Humidity
: 90 to 95%RH
Applied voltage : Rated voltage (between 1 and 2)
Applied current : Rated current (between 1 and 3)
Duration
: 500±12 hrs
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
16. Loading at High Temperature
Specied
No mechanical damage.
Insulation resistance (between 1 and 2) : 20MΩ min.
DC resistance (between 1 and 3)
: 2Ω max.
3Ω max. (FK2125T107AL)
【Test Methods and Remarks】
Temperature
: 85±2℃
Applied voltage : Rated voltage (between 1 and 2)
Applied current : Rated current (between 1 and 3)
Duration
: 500±12 hrs
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
Note on standard condition :
"standard condition" referred to herein is dened as follows :
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃
of temperature, 60 to 70% relative humidity and 86 to 106kPa of air pressure.
Unless otherwise specied, all the tests are conducted under the "standard condition."
※Circuit diagram
Since neither 1 nor 3 is directional,
either could be served as the IN terminal.