
4
www.pericom.com
PS-0.2
05/12/11
PI3EQX7742ST
5.0 Gbps, 2-port USB 3.0 ReDriver with Digital Configuration
PRELIMINARY INFORMATION - COMPANY CONFIDENTIAL
Storage Temperature.......................................................... –65°C to +150°C
Supply Voltage to Ground Potential...................................–0.5V to +4.6V
DC SIG Voltage ..........................................................–0.5V to VDD +0.5V
Current Output ............................................................... –25mA to +25mA
Power Dissipation Continuous .............................................................1.0W
Operating Temperature ............................................................... 0 to +70°C
ESD, Human Body Model ...................................................... –2kv to +2kV
ESD, Machine Model..........................................................–200V to +200V
ESD, Charged Device Model.............................................–500V to +500V
AC/DC Electrical Characteristics
Symbol
Parameter
Conditions
Min. Typ. Max. Units
3.3V Power Supply Characteristics
VDD33
Power Supply Voltage
3.0
3.6
V
PSTANDBY33
Supply Power @3.3V Standby
EN_ [A : B : C : D] #=1
3.6
mW
PSLUMBER33
Supply Power @3.3V Slumber
EN_[A : B : C : D] #= 0, no input signal
100
PDEVICE_UNPLUG Supply Power Device Unplug
EN_[A : B : C : D] #= 1, RxDet = 1
6.6
PACTIVE33
Supply Power @3.3V Active
EN_[A : B : C : D]# = 0, VRX-DIFF-P ≥ VTH-
SD
792
IDD-STANDBY33
Supply Current @3.3V Standby
EN_ [A : B : C : D]# = 1
1
mA
IDD-SLUMBER33
Supply Current @3.3V Slumber EN_[A : B : C : D]# = 0, no input signal
28
mA
IDD-DEVICE _UN-
PLUG
Supply Current @3.3V Partial
EN_[A : B : C : D]# = 1, RxDet = 1
2
mA
IDD-ACTIVE33
Supply Current @3.3V Active
EN_x# = 0, VRX-DIFF-P ≥ VTH-SD
220
tPD
Latency
From input to output
1
2
ns
CML Receiver Input (100W Differential)
Note: Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these
or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
reliability.
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
11-0068