参数资料
型号: PIC12C671T-04I/SM
厂商: Microchip Technology
文件页数: 74/129页
文件大小: 0K
描述: IC MCU OTP 1KX14 A/D 8-SOIJ
产品培训模块: Asynchronous Stimulus
标准包装: 2,100
系列: PIC® 12C
核心处理器: PIC
芯体尺寸: 8-位
速度: 4MHz
外围设备: POR,WDT
输入/输出数: 5
程序存储器容量: 1.75KB(1K x 14)
程序存储器类型: OTP
RAM 容量: 128 x 8
电压 - 电源 (Vcc/Vdd): 3 V ~ 5.5 V
数据转换器: A/D 4x8b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 8-SOIC(0.209",5.30mm 宽)
包装: 带卷 (TR)
配用: AC164312-ND - MODULE SKT FOR PM3 16SOIC
309-1048-ND - ADAPTER 8-SOIC TO 8-DIP
309-1047-ND - ADAPTER 8-SOIC TO 8-DIP
1999 Microchip Technology Inc.
DS30561B-page 49
PIC12C67X
8.2
Selecting the A/D Conversion Clock
The A/D conversion time per bit is defined as TAD. The
A/D conversion requires 9.5 TAD per 8-bit conversion.
The source of the A/D conversion clock is software
selected. The four possible options for TAD are:
2TOSC
8TOSC
32TOSC
Internal ADC RC oscillator
For correct A/D conversions, the A/D conversion clock
(TAD) must be selected to ensure a minimum TAD time
of 1.6
s. If the minimum TAD time of 1.6 s can not be
obtained, TAD should be
≤8 s for preferred operation.
Table 8-1 shows the resultant TAD times derived from
the device operating frequencies and the A/D clock
source selected.
8.3
Configuring Analog Port Pins
The ADCON1 and TRIS Registers control the opera-
tion of the A/D port pins. The port pins that are desired
as analog inputs must have their corresponding TRIS
bits set (input). If the TRIS bit is cleared (output), the
digital output level (VOH or VOL) will be converted.
The A/D operation is independent of the state of the
CHS<2:0> bits and the TRIS bits.
Note 1: When reading the port register, all pins
configured as analog input channel will
read as cleared (a low level). Pins config-
ured as digital inputs, will convert an ana-
log input. Analog levels on a digitally
configured input will not affect the conver-
sion accuracy.
2: Analog levels on any pin that is defined as
a digital input (including the AN<3:0>
pins) may cause the input buffer to con-
sume current that is out of the devices
specification.
TABLE 8-1:
TAD vs. DEVICE OPERATING FREQUENCIES
AD Clock Source (TAD)
Device Frequency
Operation
ADCS<1:0>
4 MHz
1.25 MHz
333.33 kHz
2TOSC
00
500 ns(2)
1.6
s6 s
8TOSC
01
2.0
s6.4 s
24
s(3)
32TOSC
10
8.0
s
25.6
s(3)
96
s(3)
Internal ADC RC Oscillator(5)
11
2 - 6
s(1,4)
2 - 6
s(1,4)
2 - 6
s(1)
Note 1:
The RC source has a typical TAD time of 4
s.
2: These values violate the minimum required TAD time.
3: For faster conversion times, the selection of another clock source is recommended.
4: While in RC mode, with device frequency above 1 MHz, conversion accuracy is out of specification.
5: For extended voltage devices (LC), please refer to Electrical Specifications section.
相关PDF资料
PDF描述
PIC16C620A-20/P IC MCU OTP 512X14 COMP 18DIP
PIC12CE519-04I/SM IC MCU OTP 1KX12 W/EE 8-SOIJ
VI-BWY-IY-B1 CONVERTER MOD DC/DC 3.3V 33W
VI-J3X-IX CONVERTER MOD DC/DC 5.2V 75W
SST89E516RD2-40-C-NJE IC MCU 8BIT 72KB FLASH 44PLCC
相关代理商/技术参数
参数描述
PIC12C671T-10 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8-Pin, 8-Bit CMOS Microcontroller with A/D Converter
PIC12C671T-10/JM 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8-Pin, 8-Bit CMOS Microcontroller with A/D Converter
PIC12C671T-10/P 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8-Pin, 8-Bit CMOS Microcontroller with A/D Converter
PIC12C671T-10/SM 功能描述:8位微控制器 -MCU 1.75KB 128 RAM 6 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC12C671T-10E 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8-Pin, 8-Bit CMOS Microcontroller with A/D Converter