参数资料
型号: PIC16LF1824-E/ST
厂商: Microchip Technology
文件页数: 28/101页
文件大小: 0K
描述: IC MCU 8BIT 7KB FLASH 14TSSOP
标准包装: 96
系列: PIC® XLP™ mTouch™ 16F
核心处理器: PIC
芯体尺寸: 8-位
速度: 32MHz
连通性: I²C,SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 11
程序存储器容量: 7KB(4K x 14)
程序存储器类型: 闪存
EEPROM 大小: 256 x 8
RAM 容量: 256 x 8
电压 - 电源 (Vcc/Vdd): 1.8 V ~ 3.6 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 125°C
封装/外壳: 14-TSSOP(0.173",4.40mm 宽)
包装: 管件
173
2552K–AVR–04/11
ATmega329/3290/649/6490
Figure 19-4. Frame Formats
St
Start bit, always low.
(n)
Data bits (0 to 8).
P
Parity bit. Can be odd or even.
Sp
Stop bit, always high.
IDLE
No transfers on the communication line (RxD or TxD). An IDLE line must
be
high.
The frame format used by the USART is set by the UCSZn2:0, UPMn1:0 and USBSn bits in
UCSRnB and UCSRnC. The Receiver and Transmitter use the same setting. Note that changing
the setting of any of these bits will corrupt all ongoing communication for both the Receiver and
Transmitter.
The USART Character SiZe (UCSZn2:0) bits select the number of data bits in the frame. The
USART Parity mode (UPMn1:0) bits enable and set the type of parity bit. The selection between
one or two stop bits is done by the USART Stop Bit Select (USBSn) bit. The Receiver ignores
the second stop bit. An FEn (Frame Error) will therefore only be detected in the cases where the
first stop bit is zero.
19.4.1
Parity Bit Calculation
The parity bit is calculated by doing an exclusive-or of all the data bits. If odd parity is used, the
result of the exclusive or is inverted. The relation between the parity bit and data bits is as
follows:
P
even
Parity bit using even parity
Podd
Parity bit using odd parity
d
n
Data bit n of the character
If used, the parity bit is located between the last data bit and first stop bit of a serial frame.
19.5
USART Initialization
The USART has to be initialized before any communication can take place. The initialization pro-
cess normally consists of setting the baud rate, setting frame format and enabling the
Transmitter or the Receiver depending on the usage. For interrupt driven USART operation, the
Global Interrupt Flag should be cleared (and interrupts globally disabled) when doing the
initialization.
1
0
2
3
4
[5]
[6]
[7]
[8]
[P]
St
Sp1 [Sp2]
(St / IDLE)
(IDLE)
FRAME
Peven
dn 1
d
3
d
2
d
1
d
0
Podd
⊕⊕⊕⊕⊕
dn 1
d
3
d
2
d
1
d
0
1
⊕⊕⊕⊕⊕
=
相关PDF资料
PDF描述
PIC16LF1513-E/SO IC MCU 8BIT 7KB FLASH 28-SOIC
PIC16F1513-E/SO IC MCU 8BIT 7KB FLASH 28-SOIC
PIC16LF1825T-I/ST MCU PIC 14KB FLASH 14-TSSOP
PI90LV022WE IC LVDS MUX/REPEATER 16-SOIC
PIC16F1825T-I/ST MCU PIC 14K FLASH 1K RAM 14TSSOP
相关代理商/技术参数
参数描述
PIC16LF1824-I/ML 功能描述:8位微控制器 -MCU 7KB Flash 256B RAM 32 MHz Int Osc Core RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16LF1824-I/P 功能描述:8位微控制器 -MCU 7KB Flash 256B RAM 32 MHz Int Osc Core RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16LF1824-I/SL 功能描述:8位微控制器 -MCU 7KB Flash 256B RAM 32 MHz Int Osc Core RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16LF1824-I/ST 功能描述:8位微控制器 -MCU 7KB Flash 256B RAM 32 MHz Int Osc Core RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16LF1824T39A-I/ST 制造商:Microchip Technology 功能描述:MCU 8-bit PIC16 PIC RISC 7KB Flash 2.5V/3.3V 20-Pin TSSOP 制造商:Microchip Technology Inc 功能描述:PIC16LF1824 MICROCONTROLLER WITH 300-900 MHZ TRANSMITTER - Rail/Tube 制造商:Microchip Technology Inc 功能描述:IC MCU 8BIT FLASH 20TSSOP 制造商:Microchip Technology Inc 功能描述:PIC16LF1824 Microcontroller