- 您现在的位置：买卖IC网 > PDF目录18736 > PIXLITE-SO-PLFE (Flexipanel)MODULE ZIGBEE SW FAST 24-SMD PDF资料下载
参数资料
| 型号： | PIXLITE-SO-PLFE |
| 厂商： | Flexipanel |
| 文件页数： | 7/13页 |
| 文件大小： | 0K |
| 描述： | MODULE ZIGBEE SW FAST 24-SMD |
| 标准包装： | 1 |
| 系列： | Pixie™ |
| 频率： | 2.4GHz |
| 调制或协议： | 802.15.4 Zigbee |
| 功率 - 输出： | 0dBm |
| 电源电压： | 2.1 V ~ 3.6 V |
| 电流 - 接收： | 25mA |
| 电流 - 传输： | 25mA |
| 数据接口： | PCB，表面贴装 |
| 存储容量： | 32kB ROM，1536B RAM |
| 天线连接器： | PCB，表面贴装 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 26-SMD |
| 包装： | 管件 |
| 其它名称： | 658-1008-5 PIXIE-LITE-SO-PLFE |
Debug optimizations only should be reserved for
files that require debugging.
number) are licensed to a company by IEEE for an
annual fee. The licensee is then free to uniquely assign
?
?
?
?
?
?
Oscillator configuration bits must be set according
to the oscillator mode in use.
Brownout reset is recommended at 2.0V for 4MHz
devices and 2.7V for 16MHz devices.
The watchdog timer should be enabled in
software as required. For battery powered
devices, the postscaler value should be set
according to the desired wakeup rate (1:256 being
approximately 1 second).
CCP2 Mux should be set to RB3.
PORTB<4:0> should be configured as digital I/O
on reset.
If MCLR is enabled, the OEM must ensure its
the remaining 5 bytes.
FlexiPanel Ltd can provide MAC addresses under its
OUI license for the transceivers it manufactures. OEMs
therefore do not need to apply for an OUI number.
FlexiPanel Ltd’s OUI number is 00-15-C8.
For R&D purposes (i.e. in the lab or classroom), the
following MAC addresses may be used:
00:15:C8:38:41:00:00:00 to 00:15:C8:38:41:00:FF:FF
(Remember that PICs are little-endian, so MAC[7] = 00,
MAC[6] = 15, MAC[2] = C8, etc.) Volume customers
may reserve a contiguous block of MAC addresses.
correct operation. No on-board circuitry is
provided.
Regulatory
EMI ratings
The Pixie and Pixie Lite modules integrate the EasyBee
reference design which has been independently tested
for FCC and CE compliance.
For commercial purposes, contact FlexiPanel Ltd or
your distributor for an allocation of MAC addresses.
Preloading the MAC Address
All firmware from FlexiPanel Ltd permits the use of
SQTP to automatically set MAC addresses when
programming using Microchip Technology’s PM3
programmer. The ROM locations 0x006A to 0x007B
contain the following assembler code:
FCC compliance requires us to state the following:
1. This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
0x006A
0x006C
0x006E
0x0070
0x0072
0x0074
0x0076
0x0078
0x007A
RETLW
RETLW
RETLW
RETLW
RETLW
RETLW
RETLW
RETLW
RETLW
Macbyte0
Macbyte1
Macbyte2
Macbyte3
Macbyte4
Macbyte5
Macbyte6
Macbyte7
AddrValid
operation.
2. OEM products incorporating EasyBee must
include an external label containing the
following text legible to the naked eye:
Contains Transmitter Module
FCC ID:UGAZBMR10
During initialization, the firmware checks to see whether
the MAC address has been set. If it has not, and
AddrValid is nonzero, it will set the MAC address to
the values given in Macbyte0 to Macbyte7 . The
firmware ships with AddrValid equal to zero, but it
may be set during programming using SQTP.
SQTP is a feature of the PM3 programmer that allows
you to generate a file of IDs, in this case MAC
3.
Changes or modifications to the module may
void its certification.
addresses, and allocated them uniquely during
programming. To set up SQTP to allocate MAC
addresses:
ZigBee Alliance Membership
FlexiPanel is an Adopter Member of the Zigbee Alliance.
To use the Microchip Stack for ZigBee, either you must
be a member of the Zigbee Alliance. Alternatively we as
alliance members can program your firmware into the
Pixies and sell you pre-programmed ZigBee devices for
commercial use.
OUI number / MAC address
All IEEE 802.15.4 devices such as Pixie must use a
unique 8-byte MAC address. The first 3 bytes (the ‘OUI’
1. In MPLAB, ensure the PM3 programmer is
selected.
2. From the Programmer menu, select Settings…
3. Fill in the SQTP tab as shown in the following
graphic, except insert the start of your personal
MAC allocation in the “Start Value” box, and the
number of sequential MAC addresses to allocate in
the “Number of parts” box. (Note the Start value is
FF, specifying the AddrValid value, followed by
the MAC address, most significant byte first.)
p7
17-Mar-08
Pixie DS481-17
? FlexiPanel Ltd
Patents may apply and/or pending
www.FlexiPanel.com
相关PDF资料 |
PDF描述 |
|---|---|
| PL10-10-130B | TRANSF LO PRO DUAL 5VAC 2.0A |
| 7C-48.000MBB-T | OSC 48.000 MHZ 3.3V SMD |
| 3-380736-5 | CONN TEST PROBE 2LEGS TIN GREEN |
| IXFX140N30P | MOSFET N-CH 300V 140A PLUS 247 |
| MAX2510EEI+ | IC TXRX IF W/RSSI&MODLTR 28-QSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PIXLITE-SO-PLSE | 功能描述:Zigbee/802.15.4模块 Pixie Zigbee Mod SO Sleepy End Device FW RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm |
| PIXZEELITE | 制造商:RF Solutions LTD 功能描述:MODULE MINI ZIGBEE IEEE 802.15.4 |
| PIXZEELITE-SO | 制造商:RF Solutions LTD 功能描述:MODULE ZIGBEE IEEE 802.15.4 SURFACE |
| PIZERO_CASE | 功能描述:BLACK CASE FOR THE RASPBERRY PI 制造商:datawave llc 系列:* 零件状态:在售 标准包装:1 |
| PJ_08 | 制造商:MTRONPTI 制造商全称:MTRONPTI 功能描述:Surface Mount Crystals 5.5 x 11.7 x 2.2 mmPARAMETERS |
发布紧急采购，3分钟左右您将得到回复。