参数资料
型号: PKB4918HCPILV
厂商: ERICSSON POWER MODULES AB
元件分类: 电源模块
英文描述: DC-DC REG PWR SUPPLY MODULE
封装: ROHS COMPLIANT, EIGHTH BRICK PACKAGE-8
文件页数: 18/33页
文件大小: 2234K
代理商: PKB4918HCPILV
Ericsson Internal
PRODUCT SPECIFICATION
3 (6)
Prepared (also subject responsible if other)
No.
MICJMAL
3/1301-BMR 655 Uen
Approved
Checked
Date
Rev
Reference
MPM/BK/P (Natalie Johansson)
(EANDKUL)
2007-11-07
B
Operating information continued
Parallel Operation
Two converters may be paralleled for redundancy if the total
power is equal or less than PO max. It is not recommended to
parallel the converters without using external current sharing
circuits.
See Design Note 006 for detailed information.
Remote Sense
The DC/DC converters have remote sense that can be used
to compensate for voltage drops between the output and the
point of load. The sense traces should be located close to the
PCB ground layer to reduce noise susceptibility. The remote
sense circuitry will compensate for up to 10% voltage drop
between output pins and the point of load.
If the remote sense is not needed +Sense should be
connected to +Out and -Sense should be connected to -Out.
Over Temperature Protection (OTP)
The converters are protected from thermal overload by an
internal over temperature shutdown circuit.
When Tref as defined in thermal consideration section
exceeds 135°C the converter will shut down. The DC/DC
converter will make continuous attempts to start up (non-
latching mode) and resume normal operation automatically
when the temperature has dropped >10°C below the
temperature threshold.
The converters with latching option will shut down the module
when Tref exceeds 135°C and remain shut down until the
module restarts by switching on/off the input voltage or
Remote control.
Over Voltage Protection (OVP)
The converters have output over voltage protection that will
shut down the converter in over voltage conditions. The
converter will make continuous attempts to start up (non-
latching mode) and resume normal operation automatically
after removal of the over voltage condition.
The converters with latching option will shut down the module
in over voltage condition and remain shut down until the
converter restarts by switching on/off the input voltage or
Remote control.
Over Current Protection (OCP)
The converters include current limiting circuitry for protection
at continuous overload.
The output voltage will decrease towards 30% of nominal
output voltage for output currents in excess of max output
current (max IO). When reaching 30% of nominal output
voltage the converter will go into hic-up mode. The converter
will resume normal operation after removal of the overload.
The load distribution should be designed for the maximum
output short circuit current specified.
The converters with latching option will shut down the module
when reaching 30% of nominal output voltage and remain
shut down until the converter restarts by switching on/off the
input voltage or Remote control.
Pre-bias Start-up
The converter has a Pre-bias start up functionality. The
converter will sink current in a controlled way during start up
if a pre-bias source is present at the output terminals.
E
PKB4000C PI
DC/DC Converters, Input 36-75 V, Output 60 A/144 W
EN/LZT 146 377 R3F
Jun 2008
Ericsson Power Modules AB
Technical Specification
25
相关PDF资料
PDF描述
PKB4718LCPIM DC-DC REG PWR SUPPLY MODULE
PKB4110CPIM DC-DC REG PWR SUPPLY MODULE
PKB4918HCPILB DC-DC REG PWR SUPPLY MODULE
PKB4113CPIM DC-DC REG PWR SUPPLY MODULE
PKB4918HCPILIV DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PKB4918LCPI 功能描述:DC/DC转换器 1.2Vdc 50A Isolated Input 36-75V 60W RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
PKB5713PINB 制造商:Ericsson 功能描述:PKB 1/8TH-BRICK SERIES ISOLATED, THRU-HOLE, CONVERTER - Trays
PKB-632 制造商:STANDARD INSERTS 功能描述:
PKB70B1/4 功能描述:旋钮和转盘 KNOB PLASTIC W/SKIRT RoHS:否 制造商:Davies Molding 材料:Phenolic 设计:Set Screw 轴尺寸:0.25 in 直径:3/4 in 颜色:Black 指示器型式:Line
PKB84A0 制造商:MURATA 功能描述:PIEZO MURATA