- 您现在的位置：买卖IC网 > PDF目录69057 > PKR4919BSI (ERICSSON POWER MODULES AB) 1-OUTPUT 11 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PKR4919BSI |
| 厂商： | ERICSSON POWER MODULES AB |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 11 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT, SMD-18 |
| 文件页数： | 11/27页 |
| 文件大小： | 743K |
| 代理商： | PKR4919BSI |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
Ericsson Internal
PRODUCT SPECIFICATION
3 (5)
Prepared (also subject responsible if other)
No.
ESKEVIN
3/1301-BMR 640 1421+ Uen
Approved
Checked
Date
Rev
Reference
SEC/D (Julia You)
EZYPING
2007-8-24
C
Operating information continued
Parallel Operation
It is not recommended to parallel the converters without using
external current sharing circuits.
Over Temperature Protection (OTP)
The PKR 4000B Series DC/DC converters include an internal
over temperature shutdown circuit.
When the temperature exceeds 130°C - 150°C on the control
circuit the converter will shut down. The DC/DC converter will
make continuous attempts to start up (non-latching mode)
and resume normal operation automatically when the
temperature has dropped >15°C below the temperature
threshold.
Over Current Protection (OCP)
The converters include current limiting circuitry for protection
at continuous overload.
The output voltage will decrease towards zero for output
currents in excess of max output current (max IO). The
converter will resume normal operation after removal of the
overload. The load distribution should be designed for the
maximum output short circuit current specified.
Thermal Consideration
General
The converters are designed to operate in different thermal
environments and sufficient cooling must be provided to
ensure reliable operation.
Cooling is achieved mainly by conduction, from the pins to
the PCB board, and convection, which is dependant on the
airflow across the converter. Increased airflow enhances the
cooling of the converter.
The Output Current Derating graph found in the Output
section for each model provides the available output current
vs. ambient air temperature and air velocity at Vin = 53 V.
The converter is tested on a 254 x 254 mm,
35 μm (1 oz), 8-layer test board mounted vertically in a wind
tunnel with a cross-section of 305 x 305 mm.
Proper cooling of the converter can be verified by measuring
the temperature at position P1. The temperature at these
positions should not exceed the max values provided in the
table below.
Note that the max value is the absolute maximum rating
(non destruction) and that the electrical Output data is
guaranteed up to Tref +95°C.
See Design Note 019 for further information.
Position
Device
Designation
max value
P1
Transformer
Tref
110 C
P2
Mosfet
P3
PCB
P
1
Air Flow
E
PKR 4000B series
DC/DC converters, Input 36-75 V, Output up to 5 A/15 W
EN/LZT 146 301 R6D September 2007
Ericsson Power Modules AB
Technical Specication
19
相关PDF资料 |
PDF描述 |
|---|---|
| PKR4128BPI | 1-OUTPUT 12 W DC-DC REG PWR SUPPLY MODULE |
| PKR4128BSI | 1-OUTPUT 12 W DC-DC REG PWR SUPPLY MODULE |
| PKR4919BPI | 1-OUTPUT 11 W DC-DC REG PWR SUPPLY MODULE |
| PKR4211ASI | 1-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE |
| PKR4928ASPBI | 2-OUTPUT 9.5 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PKR4919BSIA | 制造商:Ericsson 功能描述: |
| PKR4919BSIB | 制造商:Ericsson 功能描述: |
| PKR4919BSIC | 制造商:Ericsson 功能描述: |
| PKR4928APIA | 制造商:Ericsson 功能描述: |
| PKR4928APIC | 制造商:Ericsson 功能描述: |
发布紧急采购，3分钟左右您将得到回复。