- 您现在的位置：买卖IC网 > PDF目录69059 > PKU4104BPILA/B (ERICSSON POWER MODULES AB) 1-OUTPUT 103.75 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | PKU4104BPILA/B |
| 厂商： | ERICSSON POWER MODULES AB |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 103.75 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-5 |
| 文件页数： | 9/18页 |
| 文件大小： | 1120K |
| 代理商： | PKU4104BPILA/B |
Ericsson Internal
PRODUCT SPEC.MECH.
2 (4)
Prepared (also subject responsible if other)
No.
EXXUYNG
5/1301-BMR 654 Uen
Approved
Checked
Date
Rev
Reference
SEC/D [Betty Wu]
See §1
2009-01-13
E
Soldering Information - Hole Mounting
The hole mounted product is intended for plated through hole
mounting by wave or manual soldering. The pin temperature is
specified to maximum 270°C for maximum 10 seconds.
A maximum preheat rate of 4°C/s and maximum preheat
temperature of 150°C is suggested. When soldering by hand,
care should be taken to avoid direct contact between the hot
soldering iron tip and the pins for more than a few seconds in
order to prevent overheating.
A no-clean flux is recommended to avoid entrapment of
cleaning fluids in cavities inside the product or between the
product and the host board. The cleaning residues may affect
long time reliability and isolation voltage.
Delivery Package Information
The surface mount products are delivered in antistatic injection
molded trays (Jedec design guide 4.10D standard) and in
antistatic carrier tape (EIA 481 standard).
The through-hole mount products are delivered in antistatic
injection molded trays (Jedec design guide 4.10D standard).
Carrier Tape Specifications
Material
Antistatic PS
Surface resistance
< 10
7 Ohm/square
Bakeability
The tape is not bakable
Tape width, W
56 mm [2.2 inch]
Pocket pitch, P1
36 mm [1.42 inch]
Pocket depth, K0
8.7 mm [0.343 inch]
Reel diameter
380 mm [15 inch]
Reel capacity
200 products /reel
Reel weight
Rounded 3 kg/full reel
Pin 1
User tape feed direction
Round holes
Elongated holes
Pocket pitch, P
1
Tap
e
wi
dt
h,
W
EIA standard carrier tape
Pocket depth, K
0
Side view
Top view
Tray Specifications
Material
Antistatic PPE
Surface resistance
10
5 < Ohm/square < 1012
Bakability
The trays can be baked at maximum
125°C for 48 hours]
Tray thickness
18.5 mm [0.728 inch]
Box capacity
150 products (5 full trays/box)
Tray weight
190 g empty, 600 g full tray
X= Vacuum pickup area
All dimensions in mm [inch]
Tolerances: X.xx mm ±0.13 mm [0.005], X.x mm ±0.26 mm [0.01]
Note: tray dimensions refer to pocket center. For exact location of
product pick up surface, refer to mechanical drawing.
E
PKU 4000B PI series
Intermediate Bus Converters
Input 36-75 V, Output up to 20 A / 100 W
EN/LZT 146 376 R3B July 2009
Ericsson AB
Technical Specication
17
相关PDF资料 |
PDF描述 |
|---|---|
| PKU4104BSIPLA/B | 1-OUTPUT 103.75 W DC-DC REG PWR SUPPLY MODULE |
| PKU4101BSIPLA/C | 1-OUTPUT 104 W DC-DC REG PWR SUPPLY MODULE |
| PKU4104BPIPLA/C | 1-OUTPUT 103.75 W DC-DC REG PWR SUPPLY MODULE |
| PKU4101BSI/C | 1-OUTPUT 104 W DC-DC REG PWR SUPPLY MODULE |
| PKU4101BSIP/C | 1-OUTPUT 104 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PKU4104BSI | 功能描述:DC/DC转换器 120W 12V OUT 10A 27.9x22.8x8.3 mm RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PKU4104CPI | 功能描述:DC/DC转换器 100W 36-75Vin 12V 8.3A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PKU4104CSI | 功能描述:DC/DC转换器 100W 36-75Vin 12V 8.3A SMT RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PKU4105CPI | 功能描述:DC/DC转换器 100W 36-75Vin 5V 20A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| PKU4105CPI/B | 制造商:Ericsson 功能描述: |
发布紧急采购，3分钟左右您将得到回复。