参数资料
| 型号： | PL-MASTERBLASTER |
| 厂商： | Altera |
| 文件页数： | 9/22页 |
| 文件大小： | 0K |
| 描述： | CABLE PROGRAMMING RS-232/USB |
| 标准包装： | 1 |
| 系列： | MasterBlaster™ |
| 附件类型： | 下载缆线 |
| 适用于相关产品： | MAX?II - 3000A，7000，9000 |
| 其它名称： | 544-1246 |
1. Installing the MasterBlaster
Serial/USB Communications Cable
Introduction
The MasterBlaster TM serial/USB communications cable is a download cable that
allows PC and workstation users to program and configure devices in-system. The
MasterBlaster cable provides multi-device JTAG chain configuration and
programming support for SRAM-based devices, such as APEX TM 20K and Mercury TM
devices, EEPROM-based devices, such as MAX ? 3000 and MAX 7000 devices, and
configuration devices, such as the EPC2 and EPC16. You can also use the
MasterBlaster cable to run SignalTap ? II logic analysis. The MasterBlaster cable also
provides multi-device passive serial (PS) chain configuration support for
SRAM-based devices, such as APEX 20K and Mercury devices. This cable can be used
in 2.5-, 3.3-, and 5.0-V systems.
Altera? offers a variety of hardware to program and configure Altera devices. For
conventional device programming, in-system programming, and in-circuit
reconfiguration, designers can choose from a wide range of programming hardware
options.
This user guide provides the following information about the MasterBlaster ?
serial/USB communications cable.
■
■
■
■
How to install the cable and its driver software
How to use the cable after installation
A complete list of the cable’s features
A functional description of the cable
Installation
The MasterBlaster communications cable connects a circuit board to the USB
(Windows 2000, Windows XP x32 edition, and Windows Vista x32 edition only) or RS-
232 serial port (called a COM port on a PC) on a PC, UNIX, or Linux workstation. The
10-pin female plug for the cable connects to a 10-pin male header on the circuit board
that contains the target device(s), as shown in Figure 1–1 . Programming or
configuration data can be downloaded from the serial or USB port, using the Quartus ?
II Programmer, through the MasterBlaster cable to the circuit board through these
connections.
1
The Quartus II software version 8.1 and later will no longer support MasterBlaster
communication cable.
The MasterBlaster communications cable receives power from any one of the
following sources:
■
■
5.0- or 3.3-V circuit boards
5.0 V from the USB cable (Windows 2000, Windows XP x32 edition, and Windows
Vista x32 edition only)
? July 2008
Altera Corporation
相关PDF资料 |
PDF描述 |
|---|---|
| PL-USB-BLASTER-RB | CABLE PROGRAMMING USB |
| PL155-47 | TRS PLUG WRENCH CRIMP STR 3-LUG |
| PL155AC-201 | TRS PLUG FULL CRIMP STR 3-LUG |
| PL1MWLT-026 | MINI WECO PATCH PLUG FOR CABLE |
| PL20-2 | BNC PLUG 50 OHM WRENCH CRIMP STR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PLMB7000-256 | 制造商:Altera Corporation 功能描述:SPECIAL ADAPTOR FOR EMC |
| PLMCARGO-L- | 制造商:PLANO 功能描述:PLANO TROUSERS CARGO TECH L |
| PLMF3000-256 | 制造商:Altera Corporation 功能描述:PKG PROG ADAPTOR FBGA256 MAX3K |
| PLMF7000-100 | 制造商:Altera Corporation 功能描述:FINELINE BGA PACKAGE ADAPTOR |
| PLMF7000-256 | 制造商:Altera Corporation 功能描述:FINELINE BGA ADAPTOR |
发布紧急采购，3分钟左右您将得到回复。