- 您现在的位置：买卖IC网 > PDF目录15471 > PLF1C331MDO1 (Nichicon)CAP ALUM 330UF 16V 20% RADIAL PDF资料下载
参数资料
| 型号： | PLF1C331MDO1 |
| 厂商： | Nichicon |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | CAP ALUM 330UF 16V 20% RADIAL |
| 标准包装： | 200 |
| 系列： | LF |
| 电容： | 330µF |
| 额定电压： | 16V |
| 容差： | ±20% |
| 寿命@温度： | 105°C 时为 2000 小时 |
| 工作温度： | -55°C ~ 105°C |
| 特点： | 聚合物 |
| 纹波电流： | 6.1A |
| ESR（等效串联电阻）： | 9 毫欧 |
| 安装类型： | 通孔 |
| 封装/外壳： | 径向，Can |
| 尺寸/尺寸： | 0.394" 直径（10.00mm） |
| 高度 - 座高（最大）： | 0.512"（13.00mm） |
| 引线间隔： | 0.197"（5.00mm） |
| 包装： | 散装 |
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
LF
Radial Lead Type, Standard
series
Low ESR, High ripple current.
Load life of 2000 hours at 105°C.
Radial lead type :
Lead free flow soldering condition correspondence.
Compliant to the RoHS directive (2011/65/EU).
LG
Higher
Capacitance
LS
Long Life
LF
Low ESR
LE
Specifications
Item
Category Temperature Range
Rated Voltage Range
– 55 to +105°C
2.5 to 25V
Performance Characteristics
Rated Capacitance Range 6.8 to 1500μF
Capacitance Tolerance
± 20%
at 120Hz, 20°C
Tangent of loss angle (tan δ ) Less than or equal to the specified value at 120Hz, 20°C
ESR (
1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current (
2)
Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20°C
Temperature Characteristics
(Max.Impedance Ratio)
Z+105°C / Z+20°C
Z– 55°C / Z+20°C
1.25
1.25
(100kHz)
Endurance
Damp Heat
(Steady State)
Resistance to
Soldering Heat
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 2000 hours at 105°C.
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 1000 hours at 60°C, 90% RH.
After soldering the capacitor under the soldering conditions
prescribed here as preheat at 150 to 200°C for 60 to 180 seconds
and peak temperature at 265°C for 10 seconds or less, the
capacitor shall meet the specifications listed at right, provided that
its temperature profile is measured at both of terminal ends facing
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Within ± 10% of the initial capacitance value ( 3)
130% or less than the initial specified value
130% or less than the initial specified value
Less than or equal to the initial specified value
the soldering side.
Marking
Navy blue print on the case top
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
3 Initial value : The value before test of examination of resistance to soldering.
Dimensions
Type numbering system (Example : 4V 560 μ F)
Capacitance
Resin coated Case
1
2
3
4
5
6
7
8
9 10 11 12
Voltage(g:4V)
P L F 0 G 5 6 1 M D O 1
Size code
Configuration
φ d
Capacitance tolerance ( ± 20%)
Series
Lot. No.
L+0.5MAX.
15MIN
4MIN
Rated capacitance (560 μ F)
Rated voltage (4V)
Series name
Type
(mm)
Size
φ D
φ 6.3 × 6L φ 6.3 × 9L φ 6.3 × 10.5L φ 8 × 7L
6.3 6.3 6.3 8.0
φ 8 × 9L
8.0
φ 8 × 12L φ 10 × 8L φ 10 × 10L φ 10 × 13L
8.0 10.0 10.0 10.0
Voltage
L
P
φ d
5.5
2.5
0.45
8.5
2.5
0.6
10.0
2.5
0.5
6.5
3.5
0.6
8.5
3.5
0.6
11.5
3.5
0.6
7.5
5.0
0.6
9.5
5.0
0.6
12.5
5.0
0.6
V
Code
2.5
e
4
g
6.3
j
10
A
16
C
20
D
25
E
Please refer to page 20 about the end seal configuration.
Dimension table in next page.
CAT.8100C-1
相关PDF资料 |
PDF描述 |
|---|---|
| H2BXT-10105-L4-ND | JUMPER-H1500TR/A2015L/X 5" |
| HBM18DSXS | CONN EDGECARD 36POS DIP .156 SLD |
| SRR0908-150ML | INDUCTOR 15UH 2.2A SMD |
| SN470M035ST | CAP ALUM 47UF 35V 20% RADIAL |
| H2BXT-10105-G4-ND | JUMPER-H1500TR/A2015G/X 5" |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PLF1C331MDO1TD | 制造商:Nichicon Corporation 功能描述:Taped, Straight Lead volts=16 cap.=330 tol=0.2 |
| PLF1C471MDO1 | 功能描述:铝有机聚合物电容器 470uF 16 Volts 20% Radial Leaded Poly RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| PLF1C471MDO1TD | 功能描述:铝有机聚合物电容器 RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| PLF1D101MDO2 | 功能描述:铝有机聚合物电容器 20volts 100uF 105c 8x12 3.5LS RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| PLF1D101MDO2TD | 功能描述:铝有机聚合物电容器 RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。