- 您现在的位置：买卖IC网 > PDF目录17104 > PLG1C331MCO1 (Nichicon)CAP ALUM 330UF 16V 20% RADIAL PDF资料下载
参数资料
| 型号： | PLG1C331MCO1 |
| 厂商： | Nichicon |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | CAP ALUM 330UF 16V 20% RADIAL |
| 产品培训模块： | Conductive Polymer Aluminum Capacitors |
| 产品目录绘图： | LG Series_8.0 x 9.0 LG Series Bottom_8.0 LG Series Part Number Markings |
| 标准包装： | 200 |
| 系列： | LG |
| 电容： | 330µF |
| 额定电压： | 16V |
| 容差： | ±20% |
| 寿命@温度： | 105°C 时为 2000 小时 |
| 工作温度： | -55°C ~ 105°C |
| 特点： | 聚合物 |
| 纹波电流： | 4.7A |
| ESR（等效串联电阻）： | 13 毫欧 |
| 安装类型： | 通孔 |
| 封装/外壳： | 径向，Can |
| 尺寸/尺寸： | 0.315" 直径（8.00mm） |
| 高度 - 座高（最大）： | 0.354"（9.00mm） |
| 引线间隔： | 0.138"（3.50mm） |
| 包装： | 散装 |
| 产品目录页面： | 1977 (CN2011-ZH PDF) |
| 其它名称： | 493-3113 |
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
LG
Radial Lead Type, Higher Capacitance
series
Higher Capacitance, Low ESR, High ripple current.
Load life of 2000 hours at 105 ° C.
Radial lead type :
Lead free flow soldering condition correspondence
LG
Compliant to the RoHS directive (2011/65/EU).
Higher
Capacitance
Specifications
Item
Category Temperature Range
Rated Voltage Range
– 55 to +105 ° C
2.5 to 16V
LF
Performance Characteristics
Rated Capacitance Range 330 to 3900μF
Capacitance Tolerance
± 20% at 120Hz, 20 ° C
Tangent of loss angle (tan δ ) Less than or equal to the specified value at 120Hz, 20 ° C
ESR (
1)
Less than or equal to the specified value at 100kHz, 20 ° C
Leakage Current (
2)
Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20 ° C
Temperature Characteristics
(Max.Impedance Ratio)
Z+105 ° C / Z+20 ° C
Z – 55 ° C / Z+20 ° C
1.25
1.25
(100kHz)
Endurance
Damp Heat
(Steady State)
Resistance to
Soldering Heat
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20 ° C after the rated voltage is
applied for 2000 hours at 105 ° C.
The specifications listed at right shall be met when the
capacitors are restored to 20 ° C after the rated voltage is
applied for 1000 hours at 60 ° C, 90% RH.
After soldering the capacitor under the soldering conditions prescribed
here as preheat at 150 to 200 ° C for 60 to 180 seconds and peak
temperature at 265 ° C for 10 seconds or less, the capacitor shall meet
the specifications listed at right, provided that its temperature profile is
measured at both of terminal ends facing the soldering side.
Navy blue print on the case top
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Within ± 10% of the initial capacitance value ( 3)
130% or less than the initial specified value
130% or less than the initial specified value
Less than or equal to the initial specified value
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105 ° C.
3 Initial value : The value before test of examination of resistance to soldering.
Dimensions
Type numbering system (Example : 4V 1200μF)
Capacitance
Resin coated Case
1
2
3
4
5
6
7
8
9 10 11 12
Voltage(g:4V)
P L G 0 G 1 2 2 M C O 1
Size code
Configuration
φ d
Capacitance tolerance ( ± 20%)
Series
Lot. No.
L+0.5MAX.
15MIN
4MIN
Rated capacitance (1200 μ F)
Rated voltage (4V)
Size
φ D
φ 8 × 9L
8.0
(mm)
φ 8 × 12L φ 10 × 13L
8.0 10.0
Voltage
Series name
Type
L
P
φ d
8.5
3.5
0.6
11.5
3.5
0.6
12.5
5.0
0.6
V
Code
2.5
e
4
g
6.3
j
10
A
16
C
Please refer to page 20 about the end seal configuration.
Dimension table in next page.
CAT.8100C
相关PDF资料 |
PDF描述 |
|---|---|
| RSM06DTKD | CONN EDGECARD 12POS DIP .156 SLD |
| REF196GSZ-REEL7 | IC VREF SERIES PREC 3.3V 8-SOIC |
| ECE-V1VA330P | CAP ALUM 33UF 35V 20% SMD |
| SCRH5D28-100 | INDUCTOR SMD 10UH 1.30A 10KHZ |
| RCM22DCMI | CONN EDGECARD 44POS .156 SQ WW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PLG1C331MCO1TD | 功能描述:铝质电解电容器 - 带引线 RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk |
| PLG1C471MDO1 | 功能描述:铝质电解电容器 - 带引线 470uF 16 Volts 20% Radial Leaded Low RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk |
| PLG1C471MDO1TD | 功能描述:铝质电解电容器 - 带引线 RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk |
| PLG1C821MDO1 | 功能描述:铝质电解电容器 - 带引线 820uF 16 Volts 20% Radial Leaded Low RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk |
| PLG1C821MDO1TD | 功能描述:铝质电解电容器 - 带引线 RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk |
发布紧急采购，3分钟左右您将得到回复。