参数资料
| 型号： | PLMJ1213 |
| 厂商： | Altera |
| 文件页数： | 8/12页 |
| 文件大小： | 0K |
| 描述： | PROGRAMMER ADAPTER 20 PIN J-LEAD |
| 标准包装： | 1 |
| 附件类型： | 编程适配器 |
| 适用于相关产品： | APU 或 PL-ASAP2/PL-MPU |
| 相关产品： | 544-2188-5-ND - IC CONFIG DEVICE 212KBIT 20-PLCC 544-1934-5-ND - IC CONFIG DEVICE 1MBIT 20-PLCC 544-1651-ND - IC CONFIG DEVICE 1MBIT 20-PLCC 544-1650-ND - IC CONFIG DEVICE 1.6MBIT 20-PLCC 544-1376-5-ND - IC CONFIG DEVICE 1.6MBIT 20-PLCC 544-1375-5-ND - IC CONFIG DEVICE 1MBIT 8-DIP 544-1371-5-ND - IC CONFIG DEVICE 440KBIT 20-PLCC 544-1370-5-ND - IC CONFIG DEVICE 212KBIT 8-DIP 544-1369-5-ND - IC CONFIG DEVICE 212KBIT 20-PLCC 544-1368-5-ND - IC CONFIG DEVICE 65KBIT 8-DIP 更多... |
| 其它名称： | PLM1213 Q2538208 |
Altera Programming Hardware Data Sheet
ByteBlasterMV
Parallel
Download
Cable
The ByteBlasterMV parallel download cable is a hardware interface to a
standard parallel port (also known as an LPT port). This cable channels
configuration data to Excalibur, Mercury, APEX II, APEX 20K, ACEX 1K,
FLEX 10K, FLEX 8000, and FLEX 6000 devices and programming data to
MAX 9000, MAX 7000S, MAX 7000B, MAX 7000A, and MAX 3000A
devices.
The ByteBlasterMV download cable has a 25-pin male header that
connects to the PC parallel port, and a 10-pin female plug that connects to
the circuit board. Data is downloaded from the PC’s parallel port through
the ByteBlasterMV cable to the circuit board.
To configure/program low-voltage devices (e.g., APEX 20K and
MAX 7000B devices) using a ByteBlasterMV download cable, connect the
cable’s VCC pin to a 3.3-V power supply and the device to the appropriate
power supply. Altera 1.8-V and 2.5-V devices have 3.3-V tolerant inputs,
so the download cable’s 3.3-V output will not harm these devices. The
pull-up resistors should be connected to the 3.3-V power supply.
Ordering Code :
PL-BYTEBLASTERMV
f
Programming
Techniques
For more information, see the ByteBlasterMV Parallel Download Cable Data
Sheet .
techniques.
Table 3. Programming/Configuration Techniques by Device Family (Part 1 of 2)
Device Family
Excalibur
Mercury
APEX II
APEX 20K
ACEX 1K
FLEX 10K
Excalibur
Mercury
APEX II
APEX 20K
ACEX 1K
FLEX 10K
FLEX 8000
FLEX 6000
8
Programming/Configuration Techniques
Download configuration data via the MasterBlaster or ByteBlasterMV download
cable, or an embedded microprocessor using the JTAG ports
In passive serial (PS) mode, download configuration data via the MasterBlaster
or ByteBlasterMV download cable
Configure devices via an on-board microcontroller
Altera Corporation
相关PDF资料 |
PDF描述 |
|---|---|
| PLR155AC-201 | TRS PLUG FULL CRIMP R/A 3-LUG |
| PLR155AC-204 | TRS PLUG FULL CRIMP R/A 3-LUG |
| PLR155ACFL-201 | TRS PLUG FULL CRIMP R/A 4-LUG |
| PLR75C-201 | TRB PLUG FULL CRIMP R/A 3-LUG |
| PLR75C-204 | TRB PLUG FULL CRIMP R/A 3-LUG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PLMJ1810 | 制造商:Altera Corporation 功能描述:PROG ADAPTOR FOR 1800/1810J |
| PLMJ3000-44 | 制造商:Altera Corporation 功能描述:PROG ADAPTOR FOR 3000A |
| PLMJ7000-44 | 制造商:Altera Corporation 功能描述:PROG ADAPTOR 7K 44 PIN J LD |
| PLMJ7000-68 | 制造商:Altera Corporation 功能描述:PROG ADAPTOR MAX7 68 PIN |
| PLMJ7000-84 | 制造商:Altera Corporation 功能描述:PROG ADAPTOR MAX7 84 PIN J-LD |
发布紧急采购，3分钟左右您将得到回复。