参数资料
型号: PMB2201
厂商: SIEMENS A G
元件分类: 衰减器
英文描述: Mixer DC - 2.5GHz and Vector Modulator 0.8 - 1.5GHz
中文描述: 800 MHz - 1500 MHz RF/MICROWAVE VECTOR MODULATOR
封装: PLASTIC, TSSOP-24
文件页数: 10/31页
文件大小: 339K
代理商: PMB2201
PMB 2201
Semiconductor Group
10
08.97
1.7
Circuit Description
Block Level Description
The PMB2201 includes an up/down conversion mixer and a direct quadrature modulator
on one chip.
The mixer is a fully balanced Gilbert cell. The IF, IFX pins are low impedance inputs. The
transfer function from this input to the mixer output is linear for input levels below the 1dB
compression point. For improved intermodulation the mixer current can be increased
with external resistors to GND2 at IF, IFX. The RF, RFX pins are high impedance inputs
and are DC connected to the bases of the transistors in the Gilbert cell. The input level
at RF, RFX should be high enough to ensure proper switching of the differential
transistor pairs. The mixer output pins MO, MOX are high impedance open collector
outputs. The wanted mixer output product can be band pass filtered and fed to the
LO,LOX input of the modulator or to an external load.
The LO, LOX pins are the high impedance inputs of an emitter coupled differential pair.
The LO signal is internally divided into two orthogonal carriers at the transmit frequency.
The modulator has two Gilbert cell multipliers, in which the modulation signals A(t) and
B(t) are mixed with the orthogonal carriers. The outputs of both Gilbert cells are added
and amplified by a linear output stage. The modulated transmit signal is available at the
high impedance open collector outputs E/EX and can be fed to a power amplifier.
At the output TREF a DC voltage for biasing the modulation inputs A, AX, B, BX is
available, which should be capacitively decoupled to ground. The modulation inputs can
be connected externally via bias resistors to TREF. Due to the low voltage concept a
balanced drive of the differential modulator inputs is recommended to obtain the best
second and third order spurious suppression.
The phase adjust input ADJ allows the single sideband suppression of the modulator to
be optimized for a particular application. If the specified sideband suppression is
sufficient, ADJ should only be capacitively decoupled to ground, in which case the
voltage at ADJ is set internally to half the TREF voltage. If a higher suppression is
required, the voltage at ADJ can be adjusted to the optimum value by a pull-up resistor
to TREF, a pull-down resistor to GND1 or a potentiometer between TREF and GND1.
The modulator and the mixer have separate supply, ground and power down pins:
VCC1, GND1, PD1 for the modulator and VCC2, GND2, PD2 for the mixer. Applying a
logic LOW to PD1 or PD2 powers down the corresponding part of the chip, including its
bias circuitry. Depending on the application the power down pins can be combined or
separately fixed to supply rails.
相关PDF资料
PDF描述
PMB2208 Mixer and IF Vector Modulator
PMB2240 GSM-Transmitter
PMB2306 PLL-Frequency Synthesizer PMB2306R/PMB2306T Version 2.2
PMB2306R PLL-Frequency Synthesizer PMB2306R/PMB2306T Version 2.2
PMB2306T PLL-Frequency Synthesizer PMB2306R/PMB2306T Version 2.2
相关代理商/技术参数
参数描述
PMB2201R-V12TR 功能描述:MODULATOR VECT/MIXR DC P-TSSOP24 RoHS:否 类别:RF/IF 和 RFID >> RF 调制器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:调制器 LO 频率:700MHz ~ 2.3GHz RF 频率:700MHz ~ 2.3GHz P1dB:1dBm 底噪:-148dBm/Hz 输出功率:-1dBm 电流 - 电源:46mA 电源电压:2.7 V ~ 3.6 V 测试频率:1.75GHz 封装/外壳:28-WFQFN 裸露焊盘 包装:带卷 (TR)
PMB2202 制造商:未知厂家 制造商全称:未知厂家 功能描述:RF Modulator
PMB2202RV12 制造商:Siemens 功能描述:
PMB2205 制造商:未知厂家 制造商全称:未知厂家 功能描述:RF Modulator
PMB2205S(V1.1) 制造商:未知厂家 制造商全称:未知厂家 功能描述:RF Modulator