收藏本站
参数资料
型号： PMJ5918TP
厂商： ERICSSON POWER MODULES AB
元件分类： 电源模块
英文描述： 1-OUTPUT 99 W DC-DC REG PWR SUPPLY MODULE
封装： ROHS COMPLIANT, 13 PIN
文件页数： 16/32页
文件大小： 700K
代理商： PMJ5918TP
Ericsson Internal
PRODUCT SPEC.
1 (5)
Prepared (also subject responsible if other)
No.
SEC/D KEVIN YAN
3/1301-BMR 646 5 Uen
Approved
Checked
Date
Rev
Reference
SEC/D Wei Zhang A
2006-2-8
A
EMC Specification
Conducted EMI measured according to test set-up.
The fundamental switching frequency is 300 kHz for
PMJ 5918T @ VI = 5.0 V, max IO.
Conducted EMI Input terminal value (typ)
TBD
EMI without filter
TBD
Test set-up
Layout recommendation
The radiated EMI performance of the DC/DC regulator will
depend on the PCB layout and ground layer design.
It is also important to consider the stand-off of the DC/DC
regulator.
If a ground layer is used, it should be connected to the output
of the DC/DC regulator and the equipment ground or chassis.
A ground layer will increase the stray capacitance in the PCB
and improve the high frequency EMC performance.
Output ripple and noise
Output ripple and noise measured according to figure below.
See Design Note 022 for detailed information.
Output ripple and noise test setup
Operating information
Extended information for POLA products is found in
Application Note POLA.
Input Voltage
The input voltage range 4.50 to 5.50 Vdc makes the product
easy to use in intermediate bus applications when powered
by a regulated bus converter.
Turn-off Input Voltage
The DC/DC regulators monitor the input voltage and will turn
on and turn off at predetermined levels.
The minimum hysteresis between turn on and turn off input
voltage is 50mV.
Remote Control (RC) Inhibit
The products are fitted with a
remote control function referenced
to the primary negative input
connection (- In), positive logic. The
INHIBIT function allows the
regulator to be turned on/off by an
external device like a
semiconductor or mechanical
switch. The INHIBIT pin has an
internal pull up resistor to + In.
The regulator will turn on when the input voltage is applied
with the INHIBIT pin open. Turn off is achieved by connecting
the INHIBIT pin to the - In. To ensure safe turn off, the voltage
difference between INHIBIT pin and the - In pin shall be less
than 0.6V. The regulator will restart automatically when this
connection is opened.
E
PMJ 5000 series
POL regulator, Input 4.5-5.5 V, Output 30 A/108 W
EN/LZT 146 326 R1B April 2006
Ericsson Power Modules AB
Technical Specication
23
相关PDF资料
PDF描述
PML4418TP 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE
PML5518TP 1-OUTPUT 59.4 W DC-DC REG PWR SUPPLY MODULE
PMM8218TSR 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
PMN5118US 1-OUTPUT 108 W DC-DC REG PWR SUPPLY MODULE
PMN5118USR 1-OUTPUT 108 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PMJ5918TS 功能描述:DC/DC转换器 .8-3.6 Vdc 30A Iso Input 5V 108W RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸:
PMJ5918TSR 功能描述:DC/DC转换器 0.8-3.6V 30A Non-Iso Input 5V 108W RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸:
PMJ8118LP 功能描述:DC/DC转换器 1.2-5.5V 26A Non-Iso Input 12V 143W RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸:
PMJ8118LS 功能描述:DC/DC转换器 1.2-5.5 Vdc 26A Iso Input 12V 143W RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸:
PMJ8118LSR 功能描述:DC/DC转换器 1.2-5.5V 26A Non-Iso Input 12V 143W RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*