参数资料
型号: PNP-950-L22
元件分类: PLL合成/DDS/VCOs
英文描述: PLL FREQUENCY SYNTHESIZER, 250 MHz, QCC22
文件页数: 5/11页
文件大小: 189K
代理商: PNP-950-L22
Pin Descriptions
PNP-950-L22
Mnemonic
FUNCTION
RF
RF Output. This pin is AC coupled and should be connected to a non-reflective 50 ohm load.
V1
Supply Input. Decoupling capacitors to the ground plane should be placed as close as possi-
ble to this pin.
V2
Supply Input. Decoupling capacitors to the ground plane should be placed as close as possi-
ble to this pin.
REF
Reference Input. This is a CMOS input with a nominal threshold of V2/2 and a dc equivalent
input resistance of 100K ohms. This input can be driven from a CMOS or TTL crystal clock
oscillator or it can be ac coupled.
GND
Digital, Analog and RF Ground.
DA0
Serial Interface. This input functions as CS in MICROWIRE/SPI Bus mode. This input func-
tions as SDA in I
2C BUS mode.
DA1
Serial Interface. This input functions as DATA in MICROWIRE/SPI BUS mode. This input
functions as SCL in I
2C BUS mode.
DA2
Serial Interface. This input functions as CLOCK in MICROWIRE/SPI BUS mode. This input
must be connected to the GROUND in I
2C BUS mode.
LD
Lock Detect. This output is active high and provides a continuous digital lock status.
Absolute Maximum Ratings
V1 to Ground
-0.3 to +5.5 Vdc
V2 to Ground
-0.3 to +3.6 Vdc
REF IN to Ground
-0.3 to (Dvdd + 0.3) Vdc
RF OUT to Ground
+/- 25 Vdc
Digital I/O to Ground
-0.3 to V2 + 0.3 Vdc
Operating Temperature
-40
° to +85°C
Storage Temperature
-55
° to +100°C
Stress above those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. This is a stress
rating only. Operation of the device above the conditions listed
in the operational sections of this specification is not implied.
Ordering Guide
PNP-950-L22
Model
I
2C Address
Type Code
PNP-950-L22
Default
P001
PNP-950A-L22
Default + 1
P001
PNP-950B-L22
Default + 2
P001
PNP-950C-L22
Default + 3
P001
CAUTION!
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as
4000V readily accumulate on the human body and test equipment and can dis-
charge without detection. Although the PNP family of synthesizers feature ESD
protection circuitry, permanent damage may occur on devices subjected to high-
energy electrostatic discharges. Therefore, proper ESD precautions are recom-
mended to avoid performance degradation or loss of functionality
相关PDF资料
PDF描述
PNP-950B-L22 PLL FREQUENCY SYNTHESIZER, 250 MHz, QCC22
PQ24018QGA25PNS 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PQ24018QGA25PRS 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PQ24018QGA25NYS 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PQ24018QGA25PYS 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PN-Q208/5256V 功能描述:插座和适配器 208 Pin PQFP SoctAdp ispLSI 5256VA Pb-Fr RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
PN-Q208/LFXP2 功能描述:插座和适配器 Socket Adapter RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
PN-Q208/LFXP3C 功能描述:插座和适配器 208PQFP Socket Adapt for LFXP3C RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
PN-Q48/CLK5406D 功能描述:插座和适配器 48 Pin QFNS Socket Adapter for ispPAC-CLK5406D, Lead-Free RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
PNQ48CLK5406D 功能描述:EEPLD - 电子擦除可编程逻辑设备 Socket Adapter for ispPAC-CLK5406D RoHS:否 制造商:Atmel 逻辑系列:ATF16V8BQL 最大工作频率:62 MHz 可编程输入/输出端数量:20 电源电流:20 mA 延迟时间:15 ns 每个宏指令的积项数:8 电源电压-最大:5.5 V 电源电压-最小:4.5 V 大电池数量:8 最小工作温度:- 40 C 最大工作温度:+ 85 C 安装风格:Through Hole 封装 / 箱体:PDIP-20