参数资料
型号: PPM3-MK2
厂商: Equinox Technologies
文件页数: 53/85页
文件大小: 0K
描述: PROGRAMMER PRODUCTION ISP
标准包装: 1
系列: PPM3-MK2
类型: 生产用 ISP
适用于相关产品: Atmel 89C51Rx2、NXP P89CRx2/66x、Zensys 3 线 SPI
所含物品: 编程器、电源适配器、软件、缆线和说明文档
其它名称: 483-1002
PPM3-MK2(UN)
2.7 ASCII Text Communications Mode
2.7.1 Overview
The ‘ASCII Text Control’ communications protocol or ‘ATC’ is designed as a simple way for a Remote
Test System to control the basic programming operations of an Equinox programmer via an RS-232
serial link. It is an ‘ASCII’ protocol with simple commands to initiate programming of pre-loaded
‘Programming Projects’ which are stored in the on-board ‘FLASH Memory Store’ of the programmer.
The protocol supports up to 64 independent Programming Projects per programmer, but is limited to
one programmer.
Implementation of this protocol is straightforward due to the limited number of commands and
restricted functionality. As this is an ASCII protocol, it can be quickly evaluated using any Terminal
Emulation Software Utility such as Hyperterminal.
2.7.2 Programmers supported
The Equinox programmers which are capable of supporting ‘ASCII Text Mode’ control are listed in the
table below.
Programmer
EPSILON5
FS2000A
PPM3 MK1
PPM3 MK2
ASCII Text Mode Control
License upgrade required
License upgrade required
Enabled as standard
Enabled as standard
Order Code
EPSILON5A1-UPG6
FS2000A-UPG7
N/A
N/A
Please note:
1. The PPM3 range of Production ISP Programmers are enabled for ‘ASCII Text Mode’ control
as standard. The ‘Communications Node Address’ must be set to address ‘0’.
2. A license upgrade is required for all other programmers to enable them for ‘ASCII Text Mode’.
2.7.3 Limitations of this protocol
This protocol has been designed as a simple method to allow a Remote Application such as an In-
Circuit Tester to control the basic operations of an Equinox programmer. The programmer only
supports the programming of entire ‘Programming Projects’ which are already uploaded to the
programmer on-board FLASH memory. This protocol does not support writing / reading of individual
bytes or blocks of data to / from a Target Device.
The limitations of this protocol are as follows:
1. The protocol only supports programming of Programming Projects which are pre-loaded into
the Programmer on-board FLASH Memory Store.
2. The protocol does not support writing / reading of individual bytes or blocks of data to / from a
Target Device.
3. The protocol does not support uploading of ‘Programming Projects’ to the programmer. This
must be performed using the EQTools – Project Upload Wizard.
4. Only very limited diagnostics are available using this protocol ie. FAIL + Error Number.
2.7.4 Further Information
A full description of this protocol can be found in the Application Note ‘AN110 - ASCII Text Control
(ATC) Protocol for Remote Control of Equinox Programmers’.
42
PPM3 MKII Programmer - User Guide - V1.04 - 10 th May 2008
相关PDF资料
PDF描述
PPM3A1-UPG5M UPGRADE PPM3 RAC DEVELOPMENT
PQ-MDS-PCIEXP PCI EXPANDER ADAPTOR
PQF-44 PLUG QFP 44PIN (SOLDER DOWN)
PRG18BB471MS1RB THERMISTOR
PS1600 POWER SUPPLY HOTSWAP 90-245V
相关代理商/技术参数
参数描述
PPM3-MK2(UN) 制造商:Equinox Technologies 功能描述:PROGRAMMER ISP
PPM-4 功能描述:电线鉴定 Pre-Printed Marker Cards, Hi-Temp, .25" RoHS:否 制造商:TE Connectivity / Q-Cees 产品:Labels and Signs 类型: 材料:Vinyl 颜色:Blue 宽度:0.625 in 长度:1 in
PPM-46 制造商:Panduit Corp 功能描述:
PPM-47 制造商:Panduit Corp 功能描述:
PPM-49 制造商:Panduit Corp 功能描述: