参数资料
型号: PQ60525HTB04NKF
厂商: SYNQOR INC
元件分类: 电源模块
英文描述: DC-DC REG PWR SUPPLY MODULE
封装: HALF-BRICK PACKAGE-11
文件页数: 14/14页
文件大小: 815K
代理商: PQ60525HTB04NKF
BASIC OPERATION AND FEATURES
The
PowerQor series converter uses a two-stage power conver-
sion topology. The first stage is a buck-converter that keeps the
output voltage constant over variations in line, load, and tem-
perature. The second stage uses a transformer to provide the
functions of input/output isolation and voltage step-down to
achieve the low output voltage required.
Both the first stage and the second stage switch at a fixed fre-
quency for predictable EMI performance. Rectification of the
transformer’s output is accomplished with synchronous recti-
fiers. These devices, which are MOSFETs with a very low on-
state resistance, dissipate far less energy than Schottky diodes.
This is the primary reason that the
PowerQor converter has such
high efficiency, even at very low output voltages and very high
output currents.
Dissipation throughout the converter is so low that it does not
require a heatsink for operation. Since a heatsink is not
required, the
PowerQor converter does not need a metal base-
plate or potting material to help conduct the dissipated energy
to the heatsink. The
PowerQor converter can thus be built more
simply and reliably using high yield surface mount techniques
on a PCB substrate.
The
PowerQor series of half-brick and quarter-brick converters
uses the industry standard footprint and pin-out configuration.
CONTROL FEATURES
REMOTE ON/OFF (Pin 2): The ON/OFF input, Pin 2, per-
mits the user to control when the converter is
on or off. This
input is referenced to the return terminal of the input bus,
Vin(-). There are two versions of the converter that differ by the
sense of the logic used for the ON/OFF input.
In the positive logic version, the ON/OFF input is active high
(meaning that a high turns the converter
on). In the negative
logic version, the ON/OFF signal is active low (meaning that a
low turns the converter
on). Figure A details five possible cir-
cuits for driving the ON/OFF pin. Figure B is a detailed look of
the internal ON/OFF circuitry.
REMOTE SENSE(+) (Pins 8 and 6): The SENSE(+) inputs
correct for voltage drops along the conductors that connect the
converter’s output pins to the load.
Pin 8 should be connected to Vout(+) and Pin 6 should be con-
nected to Vout(-) at the point on the board where regulation is
desired. A remote connection at the load can adjust for a volt-
age drop only as large as that specified in this datasheet, that
is
[Vout(+) - Vout(-)] [Vsense(+) - Vsense(-)] <
Sense Range % x Vout
Pins 8 and 6 must be connected for proper regulation of the out-
put voltage. If these connections are not made, the converter
will deliver an output voltage that is slightly lower than its spec-
ified value.
Product # PQ60120HTA14
Phone 1-888-567-9596
Doc.# 005-2HT612F Rev. D
9/9/04
Page 9
Half
Brick
Technical Specification
48Vin 12Vout 13.8A
Open Collector Enable Circuit
Figure A: Various circuits for driving the ON/OFF pin.
Figure B: Internal ON/OFF pin circuitry
Remote Enable Circuit
Direct Logic Drive
Negative Logic
(Permanently Enabled)
Positive Logic
(Permanently Enabled)
ON/OFF
Vin(_
)
ON/OFF
Vin(_
)
ON/OFF
5V
TTL/
CMOS
Vin(_
)
ON/OFF
Vin(_)
Vin(_
)
TTL
5V
50k
274k
Vin(+)
ON/OFF
Vin(_)
50k
100pF
相关PDF资料
PDF描述
PQ60525HTB04PRF DC-DC REG PWR SUPPLY MODULE
PQ60525HTB04PYF DC-DC REG PWR SUPPLY MODULE
PQ60525HTB04NKS DC-DC REG PWR SUPPLY MODULE
PQ60525HTB04PNF DC-DC REG PWR SUPPLY MODULE
PQ60525HTB04PRS DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
PQ65180QGA06 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:100 Watt, No Heatsink, Isolated DC/DC Converter
PQ65180QGA06NKS 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:100 Watt, No Heatsink, Isolated DC/DC Converter
PQ65180QGA06NNS 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:100 Watt, No Heatsink, Isolated DC/DC Converter
PQ65180QGA06NRS 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:100 Watt, No Heatsink, Isolated DC/DC Converter
PQ65180QGA06NYS 制造商:SYNQOR 制造商全称:SYNQOR 功能描述:100 Watt, No Heatsink, Isolated DC/DC Converter