- 您现在的位置：买卖IC网 > Datasheet目录1000 > PR22MA11NTZF (Sharp Microelectronics)RELAY SSR 120V 150MA 6-DIP Datasheet资料下载
参数资料
| 型号： | PR22MA11NTZF |
| 厂商： | Sharp Microelectronics |
| 文件页数： | 10/14页 |
| 文件大小： | 0K |
| 描述： | RELAY SSR 120V 150MA 6-DIP |
| 产品目录绘图： | PR22MA11N, PR32MA11N |
| 标准包装： | 500 |
| 系列： | PR22MA |
| 电路： | SPST-NO（1 Form A） |
| 输出类型： | AC |
| 负载电流： | 150mA |
| 输入电压： | 1.2VDC |
| 电压 - 负载： | 0 ~ 120 V |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 封装/外壳： | 6-DIP（0.300"，7.62mm），5 引线 |
| 供应商设备封装： | 6-DIP |
| 包装： | 管件 |
| 继电器类型： | 继电器 |
| 产品目录页面： | 2634 (CN2011-ZH PDF) |
| 其它名称： | 425-2602-5 PR22MA11NTZF-ND |
PR22MA11NTZ Series
PR32MA11NTZ Series
■ Manufacturing Guidelines
● Soldering Method
Reflow Soldering:
Reflow soldering should follow the temperature profile shown below.
Soldering should not exceed the curve of temperature profile and time.
Please don't solder more than twice.
(?C)
300
Terminal : 260?C peak
( package surface : 250?C peak)
200
Reflow
220?C or more, 60s or less
100
Preheat
150 to 180?C, 120s or less
0
0
1
2
3
4
(min)
Flow Soldering :
Due to SHARP's double transfer mold construction submersion in flow solder bath is allowed under the below
listed guidelines.
Flow soldering should be completed below 270?C and within 10s.
Preheating is within the bounds of 100 to 150?C and 30 to 80s.
Please don't solder more than twice.
Hand soldering
Hand soldering should be completed within 3s when the point of solder iron is below 400?C.
Please don't solder more than twice.
Other notices
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
Sheet No.: D4-A00201EN
10
相关PDF资料 |
PDF描述 |
|---|---|
| PR308S41ESU | RELAY SSR 240VAC 8A ZC 4-SIP |
| PR308T11ESZ | RELAY SSR 240VAC 8A TRIAC 4-SIP |
| PR308T21ESZ | RELAY SSR 240VAC 8A ZC 4-SIP |
| PR31MA11NTZ | RELAY SSR 240VAC .06A TRIAC 6DIP |
| PR32MA11NTZF | RELAY SSR 240V 150MA 6-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PR22MA11NXPF | 功能描述:固态继电器-PCB安装 SSR 10mA Ift 400V 150mA non ZC RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
| PR2-2R2-JBW | 制造商:RCD Components Inc 功能描述:RESISTOR WIREWOUND 2.2OHM 2W 5% 制造商:RCD Components Inc 功能描述:RESISTOR, WIREWOUND, 2.2 OHM, 2W, 5%, Product Range:RCD - PR Series, Resistance: |
| PR230 | 制造商:LEM Holdings SSA 功能描述:PROBE CURRENT CLAMP BNC AC 200A |
| PR2304PB010 | 制造商:Hubbell Wiring Device-Kellems 功能描述:20A 4W DBL ENDED CBL, MALE R/A, 10' |
| PR2304PB015 | 制造商:Hubbell Wiring Device-Kellems 功能描述:20A 4W DBL ENDED CBL, MALE R/A, 15' |
发布紧急采购，3分钟左右您将得到回复。