参数资料
| 型号： | PS1740P02E |
| 厂商： | TDK Corporation |
| 文件页数： | 8/8页 |
| 文件大小： | 0K |
| 描述： | BUZZER PIEZO 4KHZ 17MM PC MOUNT |
| 产品培训模块： | Piezoelectric and Electromagnetic Buzzers |
| RoHS指令信息： | RoHS Material |
| 产品目录绘图： | PS1740P02 Top PS1740P02 Side PS1740P02 Bottom |
| 标准包装： | 1,500 |
| 系列： | PS |
| 驱动器电路： | 传感器，外部驱动 |
| 技术： | 压电 |
| 输入类型： | 零-峰值信号 |
| 电压 - 额定： | 3Vo-p |
| 电压范围： | 30V（最小值） |
| 频率： | 4kHz |
| 工作模式： | 连续 |
| 声压级： | 75dB @ 3V，10cm |
| 可清洗： | 无 |
| 安装类型： | 通孔 |
| 端子： | PC 引脚 |
| 尺寸/尺寸： | 圆形 - 17.00mm 直径 x 7.80mm H |
| 包装： | 散装 |
| 工作温度： | -10°C ~ 70°C |
| 产品目录页面： | 2656 (CN2011-ZH PDF) |
| 工具箱： | DKTGHILOTEST-KIT-ND - TESTER - ADVANCED HIGH LOW |
| 其它名称： | 445-2528 445-2528-1 445-2528-1-ND |
(7/7)
007-01 / 20110508 / ef532_ps.fm
All specifications are subject to change without notice.
PRECAUTIONS FOR USE
Do not apply DC bias to the piezoelectric buzzer; otherwise
insulation resistance may become low and affect the
performance.
Do not supply any voltage higher than applicable to the piezo-
electric buzzer.
Do not use the piezoelectric buzzer outdoors. It is designed for
indoor use. If the piezoelectric buzzer has to be used outdoors,
provide it with waterproofing measures; it will not operate
normally if subjected to moisture.
Do not wash the piezoelectric buzzer with solvent or allow gas to
enter it while washing; any solvent that enters it may stay inside
a long time and damage it.
A piezoelectric ceramic material of approximately 100m thick is
used in the sound generator of the buzzer. Do not press the
sound generator through the sound release hole otherwise the
ceramic material may break. Do not stack the piezoelectric
buzzers without packing.
Do not apply any mechanical force to the piezoelectric buzzer;
otherwise the case may deform and result in improper operation.
Do not place any shielding material or the like just in front of the
sound release hole of the buzzer; otherwise the sound pressure
may vary and result in unstable buzzer operation. Make sure that
the buzzer is not affected by a standing wave or the like.
Be sure to solder the buzzer terminal at 350°C max.(80W
max.)(soldering iron trip) within 5 seconds using a solder
containing silver.
Avoid using the piezoelectric buzzer for a long time where any
corrosive gas (H2S, etc.) exists; otherwise the parts or sound
generator may corroded and result in improper operation.
Be careful not to drop the piezoelectric buzzer.
RECOMMENDED OPERATING CIRCUIT EXAMPLE
VCC
C-MOS, etc
Piezoelectric
buzzer
R
R
GND
Resistor to do charging and discharging to a piezoelectric element
(Value of about 1k
is good efficiency).
Tr
(Equivalent to
C1815)
相关PDF资料 |
PDF描述 |
|---|---|
| 250R120-RAU | PTC RESETBL 60V/250V .120A RAD |
| 325140-25-0 | TERM BARRIER 25CIRC SGL ROW .325 |
| 103653-7 | CONN PLUG 8POS .1" POL UNLOAD |
| L37-3-13-7-1 | THERMAL PAD L37-3 13X7X1MM |
| PS1420P02CT | BUZZER PIEZO 2KHZ 14MM PC MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PS1742-1A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FET-OUTPUT OPTOCOUPLER |
| PS1742-2A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FET-OUTPUT OPTOCOUPLER |
| PS1742L-1A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FET-OUTPUT OPTOCOUPLER |
| PS1742L-1A-E3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FET-OUTPUT OPTOCOUPLER |
| PS1742L-1A-E4 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FET-OUTPUT OPTOCOUPLER |
发布紧急采购，3分钟左右您将得到回复。